SLVUDX4 July   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Setup
      1. 2.2.1 Input Potentiometers and MODE Jumper
      2. 2.2.2 PWM Mode (MODE = Logic Low)
      3. 2.2.3 PH/EN Mode (MODE = Logic High)
      4. 2.2.4 Half-Bridge (MODE = Hi-Z)
      5. 2.2.5 Parallel Multiple Drivers
  9. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  10. 4Additional Information
    1.     Trademarks

PCB Layouts

The following figures show the PCB layers of the EVM. The Altium source files can be downloaded in the Hardware Design Files for a given EVM.

DRV8218EVM Top View Figure 3-2 Top View
DRV8218EVM Top Layer Figure 3-3 Top Layer
DRV8218EVM Bottom View Figure 3-4 Bottom View
DRV8218EVM Bottom Layer Figure 3-5 Bottom Layer