SLVUE75B September   2026  – November 2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Hardware and Debug Setup
      1. 2.2.1 Setup to use a LaunchPad as the Host Device
      2. 2.2.2 Setup to use the BoosterPack with SmartRF Studio 8
    3. 2.3 BoosterPack Connection Pinout
    4. 2.4 GPIO Connections for CC1402P
    5. 2.5 LEDs
    6. 2.6 RX SAW Filter
  9. 3Software
    1. 3.1 Getting Started
    2. 3.2 SmartRF Studio 8
      1. 3.2.1 Code Export from SmartRF Studio
    3. 3.3 Transceiver Firmware Update
    4. 3.4 Updating the Transceiver Firmware using SmartRF Studio 8
    5. 3.5 Updating the Transceiver Firmware using the ssbl_host Example
    6. 3.6 Porting Guidelines
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Known Hardware or Software Issues
    2.     Trademarks
  12. 6Revision History

4.1 Schematics

Figure 4-1, Figure 4-2, and Figure 4-3 show the schematic implementation of the BP-CC1402P-8-FE and Figure 4-4, Figure 4-5, and Figure 4-6 show the schematic implementation of the BP-CC1402P-9-FE.

The full BP-CC1402P-8-FE and BP-CC1402P-9-FE reference schematic can be downloaded here: BP-CC140XP-X-FE.


BP-CC1402P BP-CC1402P-8-FE Schematics Page 1

Figure 4-1 BP-CC1402P-8-FE Schematics Page 1

BP-CC1402P BP-CC1402P-8-FE Schematics Page 2

Figure 4-2 BP-CC1402P-8-FE Schematics Page 2

BP-CC1402P BP-CC1402P-8-FE Schematics Page 3

Figure 4-3 BP-CC1402P-8-FE Schematics Page 3

BP-CC1402P BP-CC1402P-9-FE Schematics Page 1

Figure 4-4 BP-CC1402P-9-FE Schematics Page 1

BP-CC1402P BP-CC1402P-9-FE Schematics Page 2

Figure 4-5 BP-CC1402P-9-FE Schematics Page 2

BP-CC1402P BP-CC1402P-9-FE Schematics Page 3

Figure 4-6 BP-CC1402P-9-FE Schematics Page 3