SLVUE93 September   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 AA-EVM-MB Settings
      1. 2.1.1 Audio Serial Interface Settings
      2. 2.1.2 USB Control
      3. 2.1.3 External Control
    2. 2.2 AA-EVM-MB Power Supply
    3. 2.3 Default Jumper and Switch Settings on AA-EVM-MB
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Troubleshooting
    2.     Trademarks

2.3 Default Jumper and Switch Settings on AA-EVM-MB

Figure 2-6 shows all the default jumper settings for AA-EVM-MB.


AA-EVM-MB Default Jumper Settings

Figure 2-6 Default Jumper Settings

Table 2-2 shows the default positions for all the jumpers on AA-EVM-MB.

Table 2-2 Default Jumper Settings
Jumper Setting Description
J33.3VIOVDD selection for on-board TDM/I2S and I2C signals. IOVDD also fed to EVM.
SW2ON-ONASI (TDM/I2S) source selection.
SW39V-MIN – 9V-MAXPower USB-C voltage selection. 9V/9V compatible with 30W USB-C adapter.