SLWU095 april   2023

 

  1.   Abstract
  2.   Trademarks
  3. 1Introduction
  4. 2Functionality
    1. 2.1 ADC EVM Data Capture
    2. 2.2 DAC EVM Pattern Generator
  5. 3Hardware Configuration
    1. 3.1 Power Connections
    2. 3.2 Switches, Jumpers, and LEDs
      1. 3.2.1 Switches and Push-Buttons
      2. 3.2.2 Jumpers
    3. 3.3 LEDs
      1. 3.3.1 Power and Configuration LEDs
      2. 3.3.2 Spare LEDs
      3. 3.3.3 Connectors
        1. 3.3.3.1 SMA Connectors
        2. 3.3.3.2 FPGA Mezzanine Card (FMC+) Connector
        3. 3.3.3.3 JTAG Connectors
        4. 3.3.3.4 USB3.0 I/O Connection
  6. 4Software Start-Up
    1. 4.1 Installation Instructions
    2. 4.2 USB Interface and Drivers
  7. 5Downloading Firmware

3.2.1 Switches and Push-Buttons

The TSW14J59 contains several switches and push-buttons that enable certain functions on the board. The description of the switches is found in Table 3-1.

Table 3-1 Switch Description of the TSW14J59 Device
ComponentDescription
SW112 V Input power switch
SW2FPGA reset
SW3UCD Power monitor reset
SW4 USB reset
SW5FMC+ 12,V power switch