SNAS883A June   2024  – May 2025 LMX1860-SEP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Timing Diagram
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
      1. 6.1.1 Range of Dividers and Multiplier
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Power On Reset
      2. 6.3.2 Temperature Sensor
      3. 6.3.3 Clock Outputs
        1. 6.3.3.1 Clock Output Buffers
        2. 6.3.3.2 Clock MUX
        3. 6.3.3.3 Clock Divider
        4. 6.3.3.4 Clock Multiplier
          1. 6.3.3.4.1 General Information about the Clock Multiplier
          2. 6.3.3.4.2 State Machine Clock for the Clock Multiplier
            1. 6.3.3.4.2.1 State Machine Clock
          3. 6.3.3.4.3 Calibration for the Clock Multiplier
          4. 6.3.3.4.4 Lock Detect for the Clock Multiplier
          5. 6.3.3.4.5 Watchdog Timer
      4. 6.3.4 LOGICLK Output
        1. 6.3.4.1 LOGICLK Output Format
        2. 6.3.4.2 LOGICLK_DIV_PRE and LOGICLK_DIV Dividers
      5. 6.3.5 SYSREF
        1. 6.3.5.1 SYSREF Output Buffers
          1. 6.3.5.1.1 SYSREF Output Buffers for Main Clocks (SYSREFOUT)
          2. 6.3.5.1.2 SYSREF Output Buffer for LOGICLK
        2. 6.3.5.2 SYSREF Frequency and Delay Generation
        3. 6.3.5.3 SYSREFREQ Pins and SYSREFREQ_FORCE Field
          1. 6.3.5.3.1 SYSREFREQ Pins Common-Mode Voltage
          2. 6.3.5.3.2 SYSREFREQ Windowing Feature
            1. 6.3.5.3.2.1 General Procedure Flowchart for SYSREF Windowing Operation
            2. 6.3.5.3.2.2 SYSREFREQ Repeater Mode With Delay Generation (Retime)
            3. 6.3.5.3.2.3 Other Guidance For SYSREF Windowing
            4. 6.3.5.3.2.4 For Glitch-Free Output
            5. 6.3.5.3.2.5 If Using SYNC Feature
          3. 6.3.5.3.3 SYNC Feature
    4. 6.4 Device Functional Modes Configurations
      1. 6.4.1 Pin Mode Control
        1. 6.4.1.1 Chip Enable (CE)
        2. 6.4.1.2 Output Channel Control
        3. 6.4.1.3 Logic Output Control
        4. 6.4.1.4 SYSREF Output Control
        5. 6.4.1.5 Device Mode Selection
        6. 6.4.1.6 Divider or Multiplier Value Selection
        7. 6.4.1.7 Calibration Control Pin
        8. 6.4.1.8 Output Power Control
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 SYSREFREQ Input Configuration
      2. 7.1.2 Treatment of Unused Pins
      3. 7.1.3 Current Consumption
    2. 7.2 Typical Applications
      1. 7.2.1 Local Oscillator Distribution Application
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
        3. 7.2.1.3 Application Plot
      2. 7.2.2 JESD204B/C Clock Distribution Application
    3. 7.3 Layout
      1. 7.3.1 Layout Guidelines
      2. 7.3.2 Layout Example
    4. 7.4 Power Supply Recommendations
      1. 7.4.1 Power-Up Timing
    5. 7.5 Register Map
      1. 7.5.1 Device Registers
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

7.1.3 Current Consumption

The current consumption varies as a function of the setup condition. By adding up all the block currents shown in Table 7-2, users can obtain reasonable estimate of the current for any setup condition.

Table 7-2 Current Consumption per Block
BLOCK CONDITIONS CURRENT (mA)
Device Core CLK_MUX = Buffer Mode 294
CLK_MUX = Divide Mode 260
CLK_MUX = Multiply Mode 560
SYSREF

SYNC

Windowing

 Core SYSREF_EN=1 80
Delay Generator Generator Mode (SYSREF_MODE=0,1) 53
Repeater Mode (SYSREF_MODE=2) 40
Windowing Circuitry Windowing Circuitry

(CLKPOS_CAPTURE_EN=1)

 SYSREF_MODE=0,1 113
SYSREF_MODE=2 0
SYSREF Pulser SYSREF_MODE=1 7
CLKOUT

(Per active clock channel)

 Core SYSREF_EN=0 25
SYSREF_EN = 1 Delay Not Used 30
Delay Used 40
Output Buffer CHx_EN = CLKOUTx_EN=1 4+6*CLKOUTx_PWR
SYSREFOUT Core SYSREFOUT_EN = CHx_EN = 1 74 + SYSREFOUTx_PWR*5
Output Buffer SYSREFOUT_EN = CHx_EN = 1

(SYSREFOUTx_PWR and SYSREFOUTx_VCM can interact which makes the output buffer current lower than the formula predicts in some cases)

 2*SYSREFOUTx_PWR + 2*SYSREFOUTx_VCM
LOGICLKOUT Core LOGIC_EN=1LOGICLKOUT_EN=1 SYSREF_EN=0 49
SYSREF_EN=1 59
Output Buffer CML(RP=50Ω) 16+1*LOGICLKOUT_PWR
LVDS 12
LOGISYSREFOUT Core LOGIC_EN=1

LOGISYSREFOUT_EN=1

 SYSREF_EN=0 0
SYSREF_EN=1 55
Output Buffer LOGIC_EN=1

LOGISYSREFOUT_EN=1

 CML(RP=50Ω) 16+1*LOGICLKOUT_PWR
LVDS 12