SNAS891 March 2026 LMK1C1102-Q1 , LMK1C1104-Q1 , LMK1C1106-Q1 , LMK1C1108-Q1
ADVANCE INFORMATION
Figure 5-3 LMK1C1106-Q1, 14-Pin PW TSSOP Package (Top
View)
Figure 5-4 LMK1C1108-Q1, 16-Pin PW TSSOP Package (Top
View)| PIN | TYPE | DESCRIPTION | |||
|---|---|---|---|---|---|
| LMK1C 1102-Q1 |
LMK1C 1104-Q1 |
LMK1C 1106-Q1 |
LMK1C 1108-Q1 |
||
| LVCMOS CLOCK INPUT | |||||
| 1 | 1 | 1 | 1 | Input | Single-ended clock input with internal 300-kΩ (typical) pulldown resistor to GND. Typically connected to a single-ended clock input. |
| CLOCK OUTPUT ENABLE | |||||
| 2 | 2 | 2 | 2 | Input | Global Output Enable with internal 300-kΩ
(typical) pulldown resistor to GND. Typically connected to VDD
with external pullup resistor. HIGH: outputs enabled LOW: outputs disabled |
| LVCMOS CLOCK OUTPUT | |||||
| 3 | 3 | 3 | 3 | Output | LVCMOS output. Typically connected to a receiver. Unused outputs can be left floating. |
| 8 | 8 | 14 | 16 | ||
| — | 5 | 11 | 13 | ||
| — | 7 | 13 | 15 | ||
| — | — | 6 | 6 | ||
| — | — | 9 | 11 | ||
| — | — | — | 8 | ||
| — | — | — | 9 | ||
| SUPPLY VOLTAGE | |||||
| 6 | 6 | 5 | 5 | Power | Power supply terminal. Typically connected to a 3.3-V, 2.5-V, or 1.8-V supply. The VDD pin is typically connected to an external 0.1-μF capacitor near the pin. |
| 8 | 10 | ||||
| 12 | 14 | ||||
| GROUND | |||||
| 4 | 4 | 4 | 4 | GND | Power supply ground. |
| 7 | 7 | ||||
| 10 | 12 | ||||