SNVS686L March 2011 – June 2025 LMZ22005
PRODUCTION DATA
The PWM switching frequency can be synchronized to an external frequency source. If this feature is not used, connect this input either directly to ground, or connect to ground through a resistor of 1.5 kΩ or less. The allowed synchronization frequency range is 650 kHz to 950 kHz. The typical input threshold is 1.4-V transition level. Ideally, the input clock must overdrive the threshold by a factor of 2, so TI recommends direct drive from 3.3-V logic through a 1.5-kΩ Thevenin source resistance.
Applying a sustained logic 1 corresponds to zero Hz PWM frequency and causees the module to stop switching.