SNVSCF2A November 2025 – May 2026 LM65680
PRODMIX
The LM656x0 includes a power-good function to simplify supply sequencing and supervision in a system. Use the power-good function to enable downstream circuits supplied by the LM656x0, to control downstream protection circuits such as load switches, or to turn on sequenced supplies.
PG monitors the output voltage with a window comparator through FB for adjustable-output settings and through BIAS for fixed-output configurations. PG switches to a high impedance, open-drain state when the output voltage is in regulation. When the output voltage is outside of a ±5% range from the voltage setpoint, PG is driven low, thus warning the system of an output overvoltage or undervoltage condition. A 130µs deglitch filter on the PG falling edge prevents false tripping of PG during transients. When the output voltage recovers to within the regulation window, a 2ms filter on the PG rising edge provides additional processing time for downstream components.
TI recommends using a 100kΩ pullup resistor from PG to the relevant rail, which is less than 30V. PG asserts low during soft start and when the LM656x0 is disabled.