SNVU888 March   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Setup
    2. 2.2 Jumper Information
    3. 2.3 Power Supply
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 GUI Installation
    3. 3.3 Graphical User Interface (GUI) Guidance
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks

1.1 Introduction

This user’s guide describes the characteristics, setup, and usage of the LP5811/LP5810 evaluation module (EVM). The LP5811-10EVM helps the user evaluate the features of the Texas Instruments LP5811 synchronous boost 4 channels RGB LED driver and LP5810 4 channels RGB LED driver, which integrate autonomous control.

This document covers following topics:

  • Hardware setup instructions
  • Graphical user interface (GUI) instructions
  • Printed-circuit board (PCB) layout drawings
  • Schematic diagram
  • Bill of materials