SWAU130 march   2023

1.   Description
2.   Features
3.   3
4. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Kit Contents
   3. 1.3 Specification
   4. 1.4 Device Information
5. 2Hardware
   1. 2.1 Hardware Features
   2. 2.2 Connector and Jumper Descriptions
      1. 2.2.1 LEDs and Push-Buttons
      2. 2.2.2 Jumper Settings
      3. 2.2.3 BoosterPack Header Assignment
      4. 2.2.4 JTAG Headers
   3. 2.3 Power
      1. 2.3.1 Measure the CC3301 Current Draw
         1. 2.3.1.1 Low Current Measurement (LPDS)
         2. 2.3.1.2 Active Current Measurement
   4. 2.4 Clocking
   5. 2.5 Performing Conducted Testing
6. 3Evaluation Setups
   1. 3.1 MCU and RTOS
   2. 3.2 Processor and Linux
   3. 3.3 Standalone RF Testing
7. 4Radio Tool BP-CC3301 Hardware Setup
   1. 4.1 Option 1: LP-XDS110
   2. 4.2 Option 2: XDS110 JTAG Debug Probe
   3. 4.3 Option 3: SimpleLink Launchpad and 10 pin Cable
8. 5Hardware Design Files
   1. 5.1 Schematics
   2. 5.2 PCB Layouts
   3. 5.3 Bill of Materials (BOM)
9. 6Compliance and Certifications
10. 7Trademarks