Home Data converters Analog-to-digital converters (ADCs) Precision ADCs (<=10MSPS)

ADS1015-Q1

ACTIVE
Order now

Automotive, 12-Bit, 3.3kSPS, 4-Ch Delta-Sigma ADC w/ PGA, Oscillator, VREF, Comparator & I2C

Data sheet
Top
Automotive, 12-Bit, 3.3kSPS, 4-Ch Delta-Sigma ADC w/ PGA, Oscillator, VREF, Comparator & I2C

ADS1015-Q1

ACTIVE
Data sheet Order now

Product details

Parameters

Resolution (Bits) 12 Number of input channels 4 Sample rate (Max) (kSPS) 3.3 Interface type I2C Architecture Delta-Sigma Input type Differential, Single-Ended Multi-channel configuration Multiplexed Rating Automotive Reference mode Int Input range (Max) (V) 5.5 Input range (Min) (V) 0 Features Comparator, Oscillator, PGA Operating temperature range (C) -40 to 125 Power consumption (Typ) (mW) 0.9 Analog voltage AVDD (Min) (V) 2 Analog voltage AVDD (Max) (V) 5.5 INL (Max) (+/-LSB) 0.5 Digital supply (Min) (V) 2 Digital supply (Max) (V) 5.5 open-in-new Find other Precision ADCs (<=10MSPS)

Package | Pins | Size

VSSOP (DGS) 10 9 mm² 3 x 3 open-in-new Find other Precision ADCs (<=10MSPS)

Features

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Temperature Grade 1: –40°C to +125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • 12-Bit Noise-Free Resolution
  • Wide Supply Range: 2.0 V to 5.5 V
  • Low Current Consumption: 150 µA
    (Continuous-Conversion Mode)
  • Programmable Data Rate:
    128 SPS to 3.3 kSPS
  • Single-Cycle Settling
  • Internal Low-Drift Voltage Reference
  • Internal Oscillator
  • I2C Interface: Four Pin-Selectable Addresses
  • Four Single-Ended or Two Differential Inputs (ADS1015-Q1)
  • Programmable Comparator (ADS1014-Q1 and ADS1015-Q1)

All trademarks are the property of their respective owners.

open-in-new Find other Precision ADCs (<=10MSPS)

Description

The ADS1013-Q1, ADS1014-Q1, and ADS1015-Q1 devices (ADS101x-Q1) are precision, low-power, 12-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in a VSSOP-10 package. The ADS101x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1014-Q1 and ADS1015-Q1 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS101x-Q1 well suited for power- and space-constrained, sensor measurement applications.

The ADS101x-Q1 perform conversions at data rates up to 3300 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1015-Q1 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1014-Q1 and ADS1015-Q1 for under- and overvoltage detection.

The ADS101x-Q1 operate in either continuous-conversion mode or single-shot mode. The devices are automatically powered down after one conversion in single-shot mode; therefore, power consumption is significantly reduced during idle periods.

 open-in-new Find other Precision ADCs (<=10MSPS)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 6
Type Title Date
* Datasheet ADS101x-Q1 Automotive, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator datasheet (Rev. C) Jan. 08, 2018
E-book Fundamentals of Precision ADC Noise Analysis Jun. 19, 2020
Application note Digital Filter Types in Delta-Sigma ADCs Jun. 27, 2017
Application note How delta-sigma ADCs work, Part 1 (Rev. A) Sep. 19, 2016
E-book Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs Mar. 19, 2015
Application note How delta-sigma ADCs work, Part 2 Nov. 09, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
49
Description

The ADS1015EVM is an evaluation board for the ADS1015, a 12-bit, multi-channel, delta-sigma analog-to-digital converter (ADC). The modular EVM uses two ADS1015s and minimal circuitry to demonstrate functionality and I²C bus communication for prototyping and part evaluation. The pins of the (...)

Features
  • Contains all support circuitry needed for the ADS1015
  • Two ADS1015 devices on-board to demonstrate I²C bus functionality
  • +3.3, +5V, or external power supply options for ADC
  • Compatible with the TI Modular EVM System
View details
EVALUATION BOARD Download
document-generic User guide
Description

The ADS1015EVM-PDK is a complete evaluation/demonstration kit, which combines an ADS1015EVM with the MSP430-based MMB3 motherboard for use with a personal computer. The MMB3 motherboard allows the ADS1015EVM to connect to a computer via a USB port. The ADS1015EVM-PDK is controlled by the (...)

Features
  • Easy-to-use evaluation software for Microsoft™ Windows XP and Windows 7
  • Built-in analysis tools including scope, FFT, and histogram displays
  • Data collection to text files
  • Complete control of board settings
  • Easily expandable with new analysis plug in tools from Texas Instruments
View details

Design tools & simulation

SIMULATION MODEL Download
SBAM025.ZIP (19 KB) - IBIS Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
View details
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI — TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOL Download
Analog-to-digital converter (ADC) input driver design tool supporting multiple input types
ADC-INPUT-CALC — ADC-INPUT-CALC is an online tool that provides support for designing the input buffer to an analog-to-digital converter (ADC). It offers 24 different op-amp based buffer circuits that can be used to drive an ADC input. The available topologies cover differential, single-ended and transformer-coupled (...)
CALCULATION TOOL Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)
View details

Reference designs

REFERENCE DESIGNS Download
Thermal Protection Reference Design of IGBT Modules for HEV/EV Traction Inverters
TIDA-00794 — The TIDA-00794 reference design is a temp sensing solution for IGBT thermal protection in HEV/EV traction inverter system. It monitors the IGBT temperature via the NTC thermistor integrated inside the IGBT module. It provides thermal shut down to the IGBT gate drivers once the NTC thermistor (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VSSOP (DGS) 10 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Training series

View all TI training and videos

Videos