Home Wireless connectivity Long range Sub-1 GHz products Sub-1 GHz transceivers
Home
Wireless connectivity
Long range Sub-1 GHz products
Sub-1 GHz transceivers
NEW

CC1402P

PREVIEW
Order now
Data sheet

CC1402P

PREVIEW
Data sheet Order now

Product details

Protocols 6LoWPAN, Amazon Sidewalk, MIOTY, Proprietary, Proprietary 15.4, TI 15.4, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, OOK Frequency bands 196-240, 235-288, 294-360, 391-480, 469-576, 587-720, 782-960, 938-1152 Type Transceiver TX power (max) (dBm) 22 Sensitivity (best) (dBm) -122 RX current (lowest) (mA) 6.9 Data rate (max) (Mbps) 1.5 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled No
Protocols 6LoWPAN, Amazon Sidewalk, MIOTY, Proprietary, Proprietary 15.4, TI 15.4, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, OOK Frequency bands 196-240, 235-288, 294-360, 391-480, 469-576, 587-720, 782-960, 938-1152 Type Transceiver TX power (max) (dBm) 22 Sensitivity (best) (dBm) -122 RX current (lowest) (mA) 6.9 Data rate (max) (Mbps) 1.5 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled No
VQFN (RKP) 40 25 mm² (5 mm × 5 mm)
  • High-performance, software-configurable transceiver with support for IEEE 802.15.4
  • Wide RF frequency coverage from 196MHz to 1149MHz
  • Supported modulation formats:
    • SUN FSK, 2-(G)FSK, 4-(G) FSK, MSK and OOK
  • High linearity PA:
    • Up to +22dBm output power with FSK
  • High efficiency PA:
    • +16dBm output power in differential mode
    • +14dBm output power in single-ended mode
    • Supports FSK and OOK
  • Receiver sensitivity (w/uLNA enabled):

    • -122dBm at 1.25kbit/s for CC140x Long Range Mode

    • -107dBm at 100kbps SUN FSK #2b, no FEC

  • Current consumption:
    • 8.4mA RX in SUN FSK, high performance
    • 6.9mA RX low power mode
    • TX (high linearity PA): 134mA at +22dBm
    • TX (high efficiency PA): 33mA at +16dBm
  • Software configurable modem and in-field upgradable radio transceiver through a secure serial bootloader (SSBL)
  • Includes IEEE and TI proprietary unique IDs
  • Factory-calibrated TX power and RSSI measurement
  • Sniff mode and dual sync word capabilities
  • WaveMatch for improved sync detect performance
  • Device configuration and information
  • Action commands and status commands and data transfer commands
  • Packet streaming and repeat RX/TX supported with stream store and flush commands
  • 5mm × 5mm RKP VQFN
  • 1 × SPI, 8 × GPIO, RF front-end control, AES 128-bit hardware accelerator
  • Voltage range: 1.71V to 3.8V
  • Built-in DC/DC converter
  • ETSI EN 300 220 receiver category 1, 1.5 and 2
  • EN 303 131, EN 303 204
  • FCC CFR47 part 15
  • ARIB STD-T108
  • Wi-SUN, IEEE 802.15.4, Wireless M-bus, OMS v5.0.1 (TX burst mode), IPv6-enabled smart objects (6LoWPAN), RF proprietary systems, SimpleLink™ TI 15.4-stack
  • CC1402P BoosterPack™ development kit
  • SimpleLink™ CC140x software host driver plug-in
  • SmartRF™ Studio 8 for simple radio configuration
  • High-performance, software-configurable transceiver with support for IEEE 802.15.4
  • Wide RF frequency coverage from 196MHz to 1149MHz
  • Supported modulation formats:
    • SUN FSK, 2-(G)FSK, 4-(G) FSK, MSK and OOK
  • High linearity PA:
    • Up to +22dBm output power with FSK
  • High efficiency PA:
    • +16dBm output power in differential mode
    • +14dBm output power in single-ended mode
    • Supports FSK and OOK
  • Receiver sensitivity (w/uLNA enabled):

    • -122dBm at 1.25kbit/s for CC140x Long Range Mode

    • -107dBm at 100kbps SUN FSK #2b, no FEC

  • Current consumption:
    • 8.4mA RX in SUN FSK, high performance
    • 6.9mA RX low power mode
    • TX (high linearity PA): 134mA at +22dBm
    • TX (high efficiency PA): 33mA at +16dBm
  • Software configurable modem and in-field upgradable radio transceiver through a secure serial bootloader (SSBL)
  • Includes IEEE and TI proprietary unique IDs
  • Factory-calibrated TX power and RSSI measurement
  • Sniff mode and dual sync word capabilities
  • WaveMatch for improved sync detect performance
  • Device configuration and information
  • Action commands and status commands and data transfer commands
  • Packet streaming and repeat RX/TX supported with stream store and flush commands
  • 5mm × 5mm RKP VQFN
  • 1 × SPI, 8 × GPIO, RF front-end control, AES 128-bit hardware accelerator
  • Voltage range: 1.71V to 3.8V
  • Built-in DC/DC converter
  • ETSI EN 300 220 receiver category 1, 1.5 and 2
  • EN 303 131, EN 303 204
  • FCC CFR47 part 15
  • ARIB STD-T108
  • Wi-SUN, IEEE 802.15.4, Wireless M-bus, OMS v5.0.1 (TX burst mode), IPv6-enabled smart objects (6LoWPAN), RF proprietary systems, SimpleLink™ TI 15.4-stack
  • CC1402P BoosterPack™ development kit
  • SimpleLink™ CC140x software host driver plug-in
  • SmartRF™ Studio 8 for simple radio configuration

The SimpleLink™ CC1402P is a high-performance Sub-1GHz wireless transceiver supporting SUN FSK based on IEEE 802.15.4 as well as a wide variety of proprietary physical layers. The flexible software-defined radio architecture enables easy integration into legacy wireless systems. CC1402P is targeting Wi-SUN, 6LoWPAN and proprietary systems. The highlighted features of this device include:

  • Flexible Sub-1GHz radio supporting wide RF frequency coverage
  • Supports a variety of protocol stacks in the SimpleLink™ software development kit (SDK), including Wi-SUN®, SimpleLink™ 15.4-stack, and proprietary solutions
  • Maximum transmit power of +22dBm for constant envelope signals like FSK and O-QPSK.
  • Low power solution enabling battery-operated devices

  • Dedicated software-defined radio controller providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards

  • Flexible GPIO manager enabling support for control of external Front-End Modules (FEMs)

TI offers drivers within the SimpleLink™ SDK plugin, including a driver for firmware updates. This enables a faster path from design to production. For more information on TI’s Sub-1GHz solutions, visit www.ti.com/connectivity.

The SimpleLink™ CC1402P is a high-performance Sub-1GHz wireless transceiver supporting SUN FSK based on IEEE 802.15.4 as well as a wide variety of proprietary physical layers. The flexible software-defined radio architecture enables easy integration into legacy wireless systems. CC1402P is targeting Wi-SUN, 6LoWPAN and proprietary systems. The highlighted features of this device include:

  • Flexible Sub-1GHz radio supporting wide RF frequency coverage
  • Supports a variety of protocol stacks in the SimpleLink™ software development kit (SDK), including Wi-SUN®, SimpleLink™ 15.4-stack, and proprietary solutions
  • Maximum transmit power of +22dBm for constant envelope signals like FSK and O-QPSK.
  • Low power solution enabling battery-operated devices

  • Dedicated software-defined radio controller providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards

  • Flexible GPIO manager enabling support for control of external Front-End Modules (FEMs)

TI offers drivers within the SimpleLink™ SDK plugin, including a driver for firmware updates. This enables a faster path from design to production. For more information on TI’s Sub-1GHz solutions, visit www.ti.com/connectivity.

filter Find other Sub-1 GHz transceivers
Download View video with transcript Video

Technical documentation

No results found. Please clear your search and try again.
View all 7
Top documentation Type Title Format options Date
* Data sheet CC1402P SimpleLink™ General Purpose FSK Transceiver with Integrated High Power Amplifier datasheet PDF | HTML Sep 17, 2026
Application note How to Modify TX and RX Commands Imported/Exported from SysConfig or SmartRF™ Studio PDF | HTML Apr 30, 2026
Application note Antenna Impedance Measurement and Matching PDF | HTML Mar 22, 2022
Application note DN035 -- Antenna Quick Guide (Rev. B) Feb 9, 2022
Application note Debugging Communication Range (Rev. A) PDF | HTML May 23, 2019
Application note RF PCB Simulation Cookbook Jan 9, 2019
Application note CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) PDF | HTML Oct 2, 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LP-CC2652R7 — CC2652R7 LaunchPad™ development kit for SimpleLink™ multi-standard wireless MCU

This LaunchPad™ is used to speed development with the SimpleLink™ Multi-Standard CC2652R7 wireless MCU with support for Bluetooth®, Zigbee® and Thread.  Software support is provided by the SIMPLELINK-LOWPOWER-SDK software development kit.

Supported products & hardware
In stock
Limit:
??asset.out-of-stock-ti_en_US??
Not available
Development kit

LP-XDS110 — XDS110 LaunchPad™ development kit debugger

The LP-XDS110 LaunchPad development kit debugger is a tool to program and debug Texas Instruments (TI) microcontroller, microprocessors and DSP XDS-compatible devices. The LP-XDS110 has been designed to connect directly to split Launchpads via the 20-pin edge connector, however they can also be (...)

Supported products & hardware
In stock
Limit:
??asset.out-of-stock-ti_en_US??
Not available
Software development kit (SDK)

CC140XP-DESIGN — Design resources for CC1407P family of devices

This folder contains early access design resources for CC140xP family of devices.
Supported products & hardware
Plug-in

SIMPLELINK-TRX-PLUGIN — Transceiver Plug-in for SimpleLink™ SDK

The SimpleLink™ low-power SDKs support the CC13xx, CC23xx, CC26xx and CC27xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, (...)

Supported products & hardware
Support software

SMARTRF-STUDIO-8 — SmartRF Studio 8 application software for CC23xx and CC27xx devices

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Supported products & hardware
Certification

BP-CC1402P-8-FE-DOC-CERT — BP-CC1402P-8-FE EU Declaration of Conformity (DoC)

BP-CC1402P-8-FE EU Declaration of Conformity (DoC)
Supported products & hardware
Certification

BP-CC1402P-9-FE-DOC-CERT — BP-CC1402P-9-FE EU Declaration of Conformity (DoC)

BP-CC1402P-9-FE EU Declaration of Conformity (DoC)
Supported products & hardware
Design tool

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Hardware design reviews for SimpleLink™ CC1xxx devices

To get started with the SimpleLink™ Sub-1GHz hardware design review process:

  • Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
  • Step 2: (...)
Supported products & hardware
Package Pins CAD symbols, footprints & 3D models
VQFN (RKP) 40 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos