Quad 1-MHz, 40-V rail-to-rail input/output, low-offset-voltage, low-power op amp
Product details
Parameters
Package | Pins | Size
Features
- Low offset voltage: ±300 µV
- Low offset voltage drift: ±0.6 µV/°C
- Low noise: 30 nV/√ Hz at 1 kHz
- High common-mode rejection: 115 dB
- Low bias current: ±10 pA
- Rail-to-rail input and output
- MUX-friendly/comparator inputs
- Amplifier operates with differential inputs up to supply rail
- Amplifier can be used in open-loop or as comparator
- Wide bandwidth: 1.1-MHz GBW
- High slew rate: 4.5 V/µs
- Low quiescent current: 120 µA per amplifier
- Wide supply: ±1.35 V to ±20 V, 2.7 V to 40 V
- Robust EMIRR performance: 78 dB at 1.8 GHz
- Differential and common-mode input voltage range to supply rail
All trademarks are the property of their respective owners.
Description
The OPAx990 family (OPA990, OPA2990, and OPA4990) is a family of high voltage (40-V) general purpose operational amplifiers. These devices offer excellent DC precision and AC performance, including rail-to-rail input/output, low offset (±300 µV, typ), and low offset drift (±0.6 µV/°C, typ).
Unique features such as differential and common-mode input voltage range to the supply rail, high short-circuit current (±80 mA), high slew rate (4.5 V/µs), and shutdown make the OPAx990 an extremely flexible, robust, and high-performance op amp for high-voltage industrial applications.
The OPAx990 family of op amps is available in micro-size packages (such as X2QFN, WSON, and SOT-553), as well as standard packages (such as SOT-23, SOIC, and TSSOP), and is specified from –40°C to 125°C.
Technical documentation
No results found. Please clear your search and try again.
View all 8 | Type | Title | Date | |
|---|---|---|---|
| * | Datasheet | OPAx990 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Power Op Amp datasheet (Rev. G) | Dec. 18, 2020 |
| Application note | Circuit for detecting input floating on ADS8681 ADC | Mar. 31, 2021 | |
| Third party documents | Programmable analog output circuit maximizes industrial system flexibility | Feb. 01, 2021 | |
| Technical article | What is an op amp? | Jan. 21, 2020 | |
| Application note | Using An Op Amp for High-Side Current Sensing | Mar. 22, 2019 | |
| Technical article | How to lay out a PCB for high-performance, low-side current-sensing designs | Feb. 06, 2018 | |
| Technical article | Low-side current sensing for high-performance cost-sensitive applications | Jan. 22, 2018 | |
| Technical article | Voltage and current sensing in HEV/EV applications | Nov. 22, 2017 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Design tools & simulation
SBOMAN6A.ZIP (18 KB) - TINA-TI Reference Design
SBOMAN7B.ZIP (30 KB) - PSpice Model
SBOMAN9A.ZIP (4 KB) - Macromodels
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
- Leverages Cadence PSpice Technology
- Preinstalled library with a suite of digital models to enable worst-case timing analysis
- Dynamic updates ensure you have access to most current device models
- Optimized for simulation speed without loss of accuracy
- Supports simultaneous analysis of multiple products
- (...)
TINA-TI — TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
- Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
- Noise calculations
- Common unit translation
- Solves common amplifier circuit design problems
- Gain selections using standard resistors
- Filter configurations
- Total noise for common amplifier configurations
- (...)
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| QFN (RUC) | 14 | View options |
| SOIC (D) | 14 | View options |
| TSSOP (PW) | 14 | View options |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.