Inicio Circuitos integrados de gestión de baterías CI para cargador de batería
Inicio
Circuitos integrados de gestión de baterías
CI para cargador de batería

BQ2003

COMPRA POR ÚLTIMA VEZ

Cargador de baterías NiCd/NiMH de modo de conmutación con terminación dV negativo y dT/dt

Haga su pedido ahora
Hoja de datos
BQ2003 está en proceso de ser discontinuado
Este producto está en proceso de ser suspendido. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
BQ25172 ACTIVO Cargador lineal autónomo NiMH de 0.8 A y de 1 a 6 celdas en un encapsulado QFN Smaller solution size and more flexibility

BQ2003

COMPRA POR ÚLTIMA VEZ
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry NiCd, NiMH Charge current (max) (A) 2 Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Vin (max) (V) 5.5 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 5.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry NiCd, NiMH Charge current (max) (A) 2 Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Vin (max) (V) 5.5 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 5.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
SOIC (DW) 16 106.09 mm² (10.3 mm × 10.3 mm) PDIP (N) 16 181.42 mm² (19.3 mm × 9.4 mm)
  • Fast charge and conditioning of nickel cadmium or nickel-metal hydride batteries
  • Hysteretic PWM switch-mode current regulation or gated control of an external regulator
  • Easily integrated into systems or used as a stand-alone charger
  • Pre-charge qualification of temperature and voltage
  • Direct LED outputs display battery and charge status
  • Fast-charge termination by V, maximum voltage, maximum temperature, and maximum time
  • Optional top-off charge
  • Fast charge and conditioning of nickel cadmium or nickel-metal hydride batteries
  • Hysteretic PWM switch-mode current regulation or gated control of an external regulator
  • Easily integrated into systems or used as a stand-alone charger
  • Pre-charge qualification of temperature and voltage
  • Direct LED outputs display battery and charge status
  • Fast-charge termination by V, maximum voltage, maximum temperature, and maximum time
  • Optional top-off charge

The bq2003 Fast Charge IC provides comprehensive fast charge control functions together with high-speed switching power control circuitry on a monolithic CMOS device.

Integration of closed-loop current control circuitry allows the bq2003 to be the basis of a cost-effective solution for stand-alone and system-integrated chargers for batteries of one or more cells.

Switch-activated discharge-before-charge allows bq2003-based chargers to support battery conditioning and capacity determination.

High-efficiency power conversion is accomplished using the bq2003 as a hysteretic PWM controller for switch-mode regulation of the charging current. The bq2003 may alternatively be used to gate an externally regulated charging current.

Fast charge may begin on application of the charging supply, replacement of the battery, or switch depression. For safety, fast charge is inhibited unless/until the battery temperature and voltage are within configured limits.

Temperature, voltage, and time are monitored throughout fast charge. Fast charge is terminated by any of the following:

  • Rate of temperature rise (t)
  • Negative delta voltage (-V)
  • Maximum voltage
  • Maximum temperature
  • Maximum time

After fast charge, an optional top-off phase is available. Constant-current maintenence charge is provided by an external trickle resistor.

The bq2003 Fast Charge IC provides comprehensive fast charge control functions together with high-speed switching power control circuitry on a monolithic CMOS device.

Integration of closed-loop current control circuitry allows the bq2003 to be the basis of a cost-effective solution for stand-alone and system-integrated chargers for batteries of one or more cells.

Switch-activated discharge-before-charge allows bq2003-based chargers to support battery conditioning and capacity determination.

High-efficiency power conversion is accomplished using the bq2003 as a hysteretic PWM controller for switch-mode regulation of the charging current. The bq2003 may alternatively be used to gate an externally regulated charging current.

Fast charge may begin on application of the charging supply, replacement of the battery, or switch depression. For safety, fast charge is inhibited unless/until the battery temperature and voltage are within configured limits.

Temperature, voltage, and time are monitored throughout fast charge. Fast charge is terminated by any of the following:

  • Rate of temperature rise (t)
  • Negative delta voltage (-V)
  • Maximum voltage
  • Maximum temperature
  • Maximum time

After fast charge, an optional top-off phase is available. Constant-current maintenence charge is provided by an external trickle resistor.
filter Buscar otro/a CI para cargador de batería
Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos Fast-Charge IC datasheet (Rev. A) 21/02/2000

Pedidos y calidad