PowerPump, PowerLAN are trademarks of Texas Instruments.
The bq76PL102 PowerLAN dual-cell battery monitor is part of a complete scalable battery management system for use with arrays of up to 12 Li-Ion rechargeable cells. The bq76PL102 connects to one or two cells in a series string, performs voltage and temperature monitoring of each individual cell, and reports these parameters over the PowerLAN communication network. Together with a bq78PL114 master-gateway battery controller, the bq76PL102 forms a complete battery monitoring and management system for higher cell-count applications.
Partitioning of the battery monitor function on a per cell basis permits connection and measurement close to the cell. This results in superior accuracy and management over competing solutions. This scheme also facilitates the PowerPump cell balancing system, a technique which actively balances capacities of Li-Ion batteries without the excessive heat or limitations of bleed-balancing techniques.
The bq76PL102 PowerPump cell balancing technology uses a charge-transfer methodology which does not bleed off excess energy as heat, but instead moves energy dynamically from cell to cell as needed. Balancing is performed during all battery operational modes – charge, discharge, and rest. Balancing is automatically coordinated between all cells on a PowerLAN system. PowerPump balancing technology results in longer run time and longer cell life.
The PowerLAN communications architecture has been engineered to provide robust communications in tough EMI/RFI environments while avoiding the excessive power draw, high parts count, and elevated cost of other solutions. PowerLAN permits easy scalability using series connections of bq76PL102 dual-cell battery monitors. High-cell-count battery systems of up to 12 series cells are easily constructed without complicated high-voltage cell measurement restrictions.
The bq76PL102 works with the bq78PL114 master-gateway battery controller.
No se recomienda el uso de este producto en celdas de litio fosfato de hierro ni en celdas similares de baja tensión.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | PowerLAN Dual-Cell Li-Ion Monitor with PowerPump Cell Balancing datasheet (Rev. A) | 15 oct 2009 | |
| Application note | PowerPump(TM) Balancing (Rev. B) | 26 oct 2011 | ||
| User guide | bq78PL116EVM Evaluation Module | 19 ene 2011 | ||
| Application note | Quick-Start Guide for BQ78PL114 with BQ76PL102 Family Gas Gauges | 26 abr 2010 | ||
| EVM User's guide | bq78PL114 8S EVM (Rev. A) | 14 ene 2010 | ||
| Application note | bq78PL114 System Design Guidelines | 01 dic 2009 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The bqWizard™ application software allows the user to evaluate the condition, or state, of the battery Pack and Cells in the system. This software gives detailed insight into the workings of evaluation modules and user custom battery packs. The software is used to configure and setup (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| VQFN (RGT) | 16 | Ver opciones |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.