Inicio Circuitos integrados de gestión de baterías Monitores y equilibradores de batería
Inicio
Circuitos integrados de gestión de baterías
Monitores y equilibradores de batería
NUEVO

BQ79712PB-Q1

ACTIVO

Monitor de batería 12-S y equilibrador con protector integrado y convertidor DC-DC

Haga su pedido ahora
Hoja de datos

BQ79712PB-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Number of series cells (max) 12 Number of series cells (min) 4 Features Cell balancing, DC/DC, High precision, I2C support, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface Daisy Chain, I2C controller, SPI controller, UART Operating temperature range (°C) to Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 5.1 TI functional safety category Functional Safety-Compliant
Rating Automotive Number of series cells (max) 12 Number of series cells (min) 4 Features Cell balancing, DC/DC, High precision, I2C support, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface Daisy Chain, I2C controller, SPI controller, UART Operating temperature range (°C) to Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 5.1 TI functional safety category Functional Safety-Compliant
HTQFP (PHP) 48 81 mm² 9 x 9
  • AEC-Q100 qualified with –40°C to +125°C ambient temperature range
  • Functional Safety Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Measure from 9 to 12 cells in series per device, stackable up to 64 devices

  • Dedicated ADC per cell

  • Cell voltage and battery pack current measurement synchronized to 64us
  • Support limp home mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports bus bar without affecting measurement accuracy
  • 7 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 200mA (BQ79712SB); 400mA (BQ79712PB)
    • User controlled PWM adjusted balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support for ring architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • Support transformer and capacitive isolation
  • On chip memory for one time custom programming
  • Shutdown current 6uA
  • Compatible with BQ79600-Q1 with SPI/UART interface
  • AEC-Q100 qualified with –40°C to +125°C ambient temperature range
  • Functional Safety Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • Measure from 9 to 12 cells in series per device, stackable up to 64 devices

  • Dedicated ADC per cell

  • Cell voltage and battery pack current measurement synchronized to 64us
  • Support limp home mode with full redundancy
  • Integrated post-ADC configurable digital low-pass filters
  • Supports bus bar without affecting measurement accuracy
  • 7 GPIOs for temp sensor/analog/digital/I2C controller/SPI controller
  • Internal cell balancing
    • Balancing at 200mA (BQ79712SB); 400mA (BQ79712PB)
    • User controlled PWM adjusted balancing current
    • Built-in balancing thermal management with automatic pause and resume control
  • Robust daisy chain communication and support for ring architecture
  • Hardware reset by host simulates POR-like event without battery removal
  • Support transformer and capacitive isolation
  • On chip memory for one time custom programming
  • Shutdown current 6uA
  • Compatible with BQ79600-Q1 with SPI/UART interface

The BQ79712SB-Q1 and BQ79712PB-Q1 provide high-accuracy cell voltage measurements for 12S battery modules in high-voltage battery management systems in xEV/EV. The BQ797xx-Q1 family of monitors offers different channel options and supports high reuse of the established software and hardware across any platform. This device has advanced ADC architecture and measurement systems, meeting stringent automotive standards and safety requirements. With the daisy chain isolated by transformer (or capacitor), the device is designed for centralized or distributed architectures in xEV powertrain.

The BQ79712SB-Q1 and BQ79712PB-Q1 provide high-accuracy cell voltage measurements for 12S battery modules in high-voltage battery management systems in xEV/EV. The BQ797xx-Q1 family of monitors offers different channel options and supports high reuse of the established software and hardware across any platform. This device has advanced ADC architecture and measurement systems, meeting stringent automotive standards and safety requirements. With the daisy chain isolated by transformer (or capacitor), the device is designed for centralized or distributed architectures in xEV powertrain.
filter Buscar otro/a Monitores y equilibradores de batería
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet BQ79712B-Q1 Functional Safety-Compliant Automotive Battery Monitors datasheet PDF | HTML 08 ene 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Controlador o biblioteca

BQ79712XB-Q1-DESIGN — Secure resources folder of BQ79712PB-Q1 and BQ79712SB-Q1

Secure resources folder of BQ79712PB-Q1 and BQ79712SB-Q1
Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Controlador o biblioteca

BQ7971XB-Q1-DESIGN — BQ7971xB-Q1 Secure Resource folder

BQ7971xB-Q1 secure resources folder including datasheet, application notes, EVM userguides and other technical resources related to BQ7971xB-Q1
Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTQFP (PHP) 48 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos