CC1175

ACTIVO

Transmisor inalámbrico de rendimiento alto para sistemas de banda estrecha

Detalles del producto

Protocols IEEE 802.15.4, Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transmitter TX power (max) (dBm) 16 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols IEEE 802.15.4, Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transmitter TX power (max) (dBm) 16 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • High-Performance, Single-Chip Transmitter
    • Very Low Phase Noise: –111 dBc/Hz at
      10-kHz Offset
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • 128-Byte TX FIFO
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to +27-dBm Output Power
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • TX: 45 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Timer Running)
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN 32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220, ETSI EN 54-25
    • US: FCC CFR47 Part 15, FCC CFR47 Part 90, 24, and 101
    • Japan: ARIB RCR STD-T30, ARIB STD-T67, ARIB STD-T108
  • Peripherals and Support Functions
    • TCXO Support and Control, also in Power Modes
    • Optional Coding Gain Feature for Increased Range and Robustness
    • Temperature Sensor
  • High-Performance, Single-Chip Transmitter
    • Very Low Phase Noise: –111 dBc/Hz at
      10-kHz Offset
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • 128-Byte TX FIFO
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to +27-dBm Output Power
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • TX: 45 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Timer Running)
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN 32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220, ETSI EN 54-25
    • US: FCC CFR47 Part 15, FCC CFR47 Part 90, 24, and 101
    • Japan: ARIB RCR STD-T30, ARIB STD-T67, ARIB STD-T108
  • Peripherals and Support Functions
    • TCXO Support and Control, also in Power Modes
    • Optional Coding Gain Feature for Increased Range and Robustness
    • Temperature Sensor

The CC1175 device is a fully integrated single-chip radio transmitter designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1175 device provides extensive hardware support for packet handling, data buffering, and burst transmissions. The main operating parameters of the CC1175 device can be controlled through an SPI interface. In a typical system, the CC1175 device will be used with a microcontroller and only a few external passive components.

The CC1175 device is a fully integrated single-chip radio transmitter designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1175 device provides extensive hardware support for packet handling, data buffering, and burst transmissions. The main operating parameters of the CC1175 device can be controlled through an SPI interface. In a typical system, the CC1175 device will be used with a microcontroller and only a few external passive components.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos CC1175 High-Performance RF Transmitter for Narrowband Systems datasheet (Rev. F) PDF | HTML 29/09/2014
* Errata CC112x, CC1175 Silicon Errata (Rev. D) 24/04/2015
Nota sobre la aplicación DN035 -- Antenna Quick Guide (Rev. B) 9/02/2022
Nota sobre la aplicación Debugging Communication Range (Rev. A) PDF | HTML 23/05/2019
Nota sobre la aplicación TI LPRF EASYMODE 12/12/2014
Guía del usuario CC112x/CC1175 Low-Power High Performance Sub-1 GHz RF Transceivers User’s Guide (Rev. E) 26/09/2013
Nota sobre la aplicación AN110 – Using CC1190 Front End with CC112x/CC120x under FCC 15.247 (Rev. B) 13/06/2013
Nota sobre la aplicación AN115 -- CC112x/CC1175/CC120x Operation in 274-320 MHz Frequency Band (Rev. A) 13/06/2013
Nota sobre la aplicación DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz 27/11/2012
Nota sobre la aplicación DN040 -- Reduced Battery Current Using CC112x, CC1175_and CC1200 with TPS62730 2/10/2012
Nota sobre la aplicación DN039 -- IPC for 868/915 MHz operation with the CC112x, CC117x and CC12xx 20/08/2012
Más documentación CC1175EMK Quick Start Guide (Rev. A) 12/01/2012

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

SMARTRFTRXEBK — Placa de evaluación del transceptor SmartRF

The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.

The following transceiver evaluation modules are supported:

  • CC1101EM*
  • CC11xLEM*
  • CC112xEM*
  • CC1175EM*
  • CC1200EM*
  • (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Ejemplo de código o demostración

SWRC253 — CC112x Software Examples

Productos y hardware compatibles
Soporte de software

SWRC219 — TrxEB RF PER Test Software

Productos y hardware compatibles
Herramienta de cálculo

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio es una aplicación para Windows que ayuda a los diseñadores de sistemas de RF a evaluar fácilmente la radio en una etapa temprana del proceso de diseño para todos los dispositivos de RF de baja potencia CC1xxx y CC2xxx de TI. Simplifica la generación de los valores y comandos del (...)

Productos y hardware compatibles
Herramienta de diseño

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ CC1xxx

Para comenzar con el proceso de revisión del diseño de hardware de SimpleLink™ inferior a 1 GHz:

  • Paso 1: Antes de solicitar una revisión, es importante que revise la documentación técnica y los recursos de diseño y desarrollo disponibles en la página del producto correspondiente (consulte los (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHB) 32 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos