Inicio Servicios de chip y oblea
Inicio
Servicios de chip y oblea

LM614-MIL

ACTIVO

Amplificador operacional cuádruple de 36 V y 0.8 MHz de calidad militar con referencia de tensión pr

Haga su pedido ahora
Hoja de datos

LM614-MIL

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Product type Amplifiers Die or wafer type Tested Die Rating Military Operating temperature range (°C) -40 to 85
Product type Amplifiers Die or wafer type Tested Die Rating Military Operating temperature range (°C) -40 to 85
DIESALE (Y) — See data sheet

    Op Amp

  • Low Operating Current: 450μA
  • Wide Supply Voltage Range: 4V to 36V
  • Wide Common-Mode Range: V − to (V+− 1.8V)
  • Wide Differential Input Voltage: ±36V

    • Reference

  • Adjustable Output Voltage: 1.2V to 5.0V
  • Initial Tolerance: ±2.0%
  • Wide Operating Current Range: 17μA to 20mA
  • Tolerant of Load Capacitance

All trademarks are the property of their respective owners.

    Op Amp

  • Low Operating Current: 450μA
  • Wide Supply Voltage Range: 4V to 36V
  • Wide Common-Mode Range: V − to (V+− 1.8V)
  • Wide Differential Input Voltage: ±36V

    • Reference

  • Adjustable Output Voltage: 1.2V to 5.0V
  • Initial Tolerance: ±2.0%
  • Wide Operating Current Range: 17μA to 20mA
  • Tolerant of Load Capacitance

All trademarks are the property of their respective owners.

The LM614 consists of four op-amps and a programmable voltage reference in a 16-pin package. The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current. This device was specifically designed to lower cost and board space requirements in transducer, test, measurement and data acquisition systems.

Combining a stable voltage reference with four wide output swing op-amps makes the LM614 ideal for single supply transducers, signal conditioning and bridge driving where large common-mode-signals are common. The voltage reference consists of a reliable band-gap design that maintains low dynamic output impedance (1Ω typical), initial tolerance (2.0%), and the ability to be programmed from 1.2V to 5.0V via two external resistors. The voltage reference is very stable even when driving large capacitive loads, as are commonly encountered in CMOS data acquisition systems.

As a member of TI's new Super-Block family, the LM614 is a space-saving monolithic alternative to a multichip solution, offering a high level of integration without sacrificing performance.

The LM614 consists of four op-amps and a programmable voltage reference in a 16-pin package. The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current. This device was specifically designed to lower cost and board space requirements in transducer, test, measurement and data acquisition systems.

Combining a stable voltage reference with four wide output swing op-amps makes the LM614 ideal for single supply transducers, signal conditioning and bridge driving where large common-mode-signals are common. The voltage reference consists of a reliable band-gap design that maintains low dynamic output impedance (1Ω typical), initial tolerance (2.0%), and the ability to be programmed from 1.2V to 5.0V via two external resistors. The voltage reference is very stable even when driving large capacitive loads, as are commonly encountered in CMOS data acquisition systems.

As a member of TI's new Super-Block family, the LM614 is a space-saving monolithic alternative to a multichip solution, offering a high level of integration without sacrificing performance.
filter Buscar otro/a Servicios de chip y oblea
Descargar Ver vídeo con transcripción Video
Otros dispositivos y hoja de datos

También se pueden encontrar otras variantes del dispositivo en la  página del producto LM614

Esta hoja de datos se aplica tanto a LM614 como a LM614-MIL

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM614 Quad Operational Amplifier and Adjustable Reference datasheet (Rev. C) 25/03/2013
Libro electrónico The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 28/03/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DIESALE (Y) — Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos