SN74ALVCH162827

ACTIVO

Búferes de 20 canales, 1.65 V a 3.6 V con retención de bus y salidas de 3 estados

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN74ALVCH162827 datasheet (Rev. H) (Inglés)

SN74ALVCH162827

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Technology family

ALVC

Number of channels

20

IOL (max) (mA)

12

Supply current (max) (µA)

40

IOH (max) (mA)

-12

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

ALVC

Number of channels

20

IOL (max) (mA)

12

Supply current (max) (µA)

40

IOH (max) (mA)

-12

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SSOP (DL)

56

190.647 mm² (18.42 mm × 10.35 mm)

TVSOP (DGV)

56

72.32 mm² (11.3 mm × 6.4 mm)

TSSOP (DGG)

56

113.4 mm² (14 mm × 8.1 mm)

Member of the Texas Instruments Widebus™ Family
Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments Incorporated.

Member of the Texas Instruments Widebus™ Family
Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments Incorporated.

This 20-bit noninverting buffer/driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH162827 is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This 20-bit noninverting buffer/driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH162827 is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

filter

Buscar otro/a Búferes y controladores no inversores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 3

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	SN74ALVCH162827 datasheet (Rev. H)		16/08/2004
	Nota sobre la aplicación	Drive Transmission Lines With Logic	PDF \| HTML	20/10/2020
	Nota sobre la aplicación	An Overview of Bus-Hold Circuit and the Applications (Rev. B)		17/09/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación