SN74CBTLV1G125

ACTIVO

Interruptor de bus FET de 1 canales y 3.3 V, 1:1 (SPST)

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN74CBTLV1G125 datasheet (Rev. H) (Inglés)

SN74CBTLV1G125

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Protocols

Analog

Configuration

1:1 SPST

Number of channels

1

Bandwidth (MHz)

200

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

7

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

25000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Protocols

Analog

Configuration

1:1 SPST

Number of channels

1

Bandwidth (MHz)

200

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

7

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

25000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

SOT-SC70 (DCK)

5

4.2 mm² (2 mm × 2.1 mm)

5– Switch Connection Between Two Ports
Rail–to–Rail Switching on Data I/O Ports
I_off Supports Partial–Power–Down Mode Operation

5– Switch Connection Between Two Ports
Rail–to–Rail Switching on Data I/O Ports
I_off Supports Partial–Power–Down Mode Operation

The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.

This device is fully specified for partial–power–down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high–impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.

The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.

This device is fully specified for partial–power–down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high–impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.

filter

Buscar otro/a Protocolo e interruptores de bus y multiplexores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	SN74CBTLV1G125 datasheet (Rev. H)		29/03/2006
	Nota sobre la aplicación	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	2/06/2022
	Nota sobre la aplicación	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	1/12/2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	6/01/2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Modelo de simulación