Inicio Radiofrecuencia y microondas Amplificadores de RF Amplificadores totalmente diferenciales (FDA) de RF
Inicio
Radiofrecuencia y microondas
Amplificadores de RF
Amplificadores totalmente diferenciales (FDA) de RF
NUEVO

TRF0108-SP

ACTIVO

Radiation-hardness-assured (RHA), near-DC to 12GHz, differential to single-ended (D2S) RF amplifier

Haga su pedido ahora
Hoja de datos

TRF0108-SP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.9 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 26.5 P1dB (typ) (dBm) 11 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -43 OIP2 (typ) (dBm) 34 2nd harmonic (dBc) -39 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.9 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 26.5 P1dB (typ) (dBm) 11 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -43 OIP2 (typ) (dBm) 34 2nd harmonic (dBc) -39 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
WQFN-FCRLF (RPV) 12 4 mm² (2 mm × 2 mm)
  • Standard microcircuit drawing (SMD), 5962-25201
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QML-P
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA
  • Standard microcircuit drawing (SMD), 5962-25201
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QML-P
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA

The TRF0108-SP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SP or AFE7950-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.

The TRF0108-SP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SP or AFE7950-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.
filter Buscar otro/a Amplificadores totalmente diferenciales (FDA) de RF
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TRF0108-SP Radiation-Hardness-Assured (RHA), Near-DC to 12GHz, Differential to Single-Ended RF Amplifier datasheet PDF | HTML 10/07/2026
* Informe de radiación y confiabilidad TRF0108-SP Total Ionizing Dose (TID) Report (Rev. A) 30/03/2026
* Informe de radiación y confiabilidad TRF0108-SP Single-Event Effects (SEE) Radiation Report 27/03/2026
Guía de selección TI Space Products (Rev. L) 27/03/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

TRF0108-SP S-Parameter Model

SLOM538.ZIP (8 KB) - Modelo de parámetros-S
Productos y hardware compatibles
Herramienta de cálculo

RF-CASCADE-CALC-TOOL — Calculadora en cascada de RF TI

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
Productos y hardware compatibles
Certificación

TRF0108SP-EVM-DOC-CERT — TRF0108SP-EVM EU Declaration of Conformity (DoC)

TRF0108SP-EVM EU Declaration of Conformity (DoC)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN-FCRLF (RPV) 12 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos