TRF0208-SP

ACTIVO

Radiation-hardened, QML-P, near-DC to >8GHz, fully-differential RF amplifier

Detalles del producto

Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 8000 Gain (typ) (dB) 16 Noise figure (typ) (dB) 6.8 OIP3 (typ) (dBm) 36 P1dB (typ) (dBm) 14.5 Frequency of harmonic distortion measurement (GHz) 2 3rd harmonic (dBc) -63 OIP2 (typ) (dBm) 60 2nd harmonic (dBc) -65 Current consumption (mA) 130 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 8000 Gain (typ) (dB) 16 Noise figure (typ) (dB) 6.8 OIP3 (typ) (dBm) 36 P1dB (typ) (dBm) 14.5 Frequency of harmonic distortion measurement (GHz) 2 3rd harmonic (dBc) -63 OIP2 (typ) (dBm) 60 2nd harmonic (dBc) -65 Current consumption (mA) 130 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
WQFN-FCRLF (RPV) 12 4 mm² (2 mm × 2 mm)
  • Standard microcircuit drawing (SMD), 5962-24202
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QMLP
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Excellent performance driving RF ADCs
  • Fixed power gain of 16dB in single-ended-to-differential mode
  • Bandwidth: 11GHz, 3dB
  • Gain flatness: 8GHz, 1dB
  • OIP3: 36dBm (2GHz), 32dBm (6GHz)
  • P1dB: 14.5dBm (2GHz), 11dBm (6GHz)
  • NF: 6.8dB (2GHz), 6.8dB (6GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • Single-supply operation: 3.3V
  • Active current: 138mA
  • Standard microcircuit drawing (SMD), 5962-24202
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QMLP
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Excellent performance driving RF ADCs
  • Fixed power gain of 16dB in single-ended-to-differential mode
  • Bandwidth: 11GHz, 3dB
  • Gain flatness: 8GHz, 1dB
  • OIP3: 36dBm (2GHz), 32dBm (6GHz)
  • P1dB: 14.5dBm (2GHz), 11dBm (6GHz)
  • NF: 6.8dB (2GHz), 6.8dB (6GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • Single-supply operation: 3.3V
  • Active current: 138mA

The TRF0208-SP is a very high performance fully differential amplifier (FDA) optimized for radio frequency (RF) applications. This device is excellent for ac-coupled applications that require a single-ended to differential conversion when driving an analog-to-digital converter (ADC) such as the high-performance AFE7950-SP or ADC12DJ5200-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using TI’s advanced complementary BiCMOS process, and available in a space-saving WQFN-FCRLF package.

The TRF0208-SP operates on a single-rail supply and consumes about 138mA of active current. A power-down feature is available for power savings.

The TRF0208-SP is a very high performance fully differential amplifier (FDA) optimized for radio frequency (RF) applications. This device is excellent for ac-coupled applications that require a single-ended to differential conversion when driving an analog-to-digital converter (ADC) such as the high-performance AFE7950-SP or ADC12DJ5200-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using TI’s advanced complementary BiCMOS process, and available in a space-saving WQFN-FCRLF package.

The TRF0208-SP operates on a single-rail supply and consumes about 138mA of active current. A power-down feature is available for power savings.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TRF0208-SP Radiation-Hardness-Assured (RHA), Near-DC to 11GHz, Fully Differential RF Amplifier datasheet (Rev. B) PDF | HTML 3/11/2025
* Informe de radiación y confiabilidad TRF0208-SP, Near-DC to 11GHz, Fully Differential RF Amplifier Single-Event Effects (SEE) Radiation Report PDF | HTML 23/12/2024
* Informe de radiación y confiabilidad TRF0208-SP Total Ionizing Dose (TID) Report PDF | HTML 17/12/2024
Artículo técnico Phased array antenna systems: A new paradigm for electronics in satellites (Rev. A) PDF | HTML 11/06/2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TRF0208SP-EVM — Módulo de evaluación TRF0208-SP

El módulo de evaluación (EVM) TRF0208-SP se utiliza para evaluar el dispositivo TRF0208-SP, que es un amplificador de radiofrecuencia (RF) diferencial disponible en un encapsulado WQFN de 12 pines de 2 mm × 2 mm. El dispositivo está diseñado para accionar convertidores de señal analógica a digital (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TRF0208 S-Parameters Model

SBOMCN3.ZIP (5 KB) - Modelo de parámetros-S
Productos y hardware compatibles
Modelo de simulación

TRF0208-SEP and TRF0208-SP S-Parameter Model

SBOMCN1.ZIP (10 KB) - Modelo de parámetros-S
Productos y hardware compatibles
Herramienta de cálculo

RF-CASCADE-CALC-TOOL — Calculadora en cascada de RF TI

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
Productos y hardware compatibles
Diseño de referencia

TIDA-010260 — Diseño de referencia de transceptor integrado de grado espacial 4T5R

El diseño de referencia del transceptor integrado de grado espacial 4T5R incorpora un transceptor completo de muestreo de RF que incluye una solución de reloj y una solución de potencia. El diseño incorpora todos los dispositivos de TI con sabor SEP y los pasivos aptos para el espacio dentro de un (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN-FCRLF (RPV) 12 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos