TSU6111A

Name: TSU6111A
Brand: TI
SKU: TSU6111A
Price: 0.311 USD

ACTIVO

Interruptor Micro-USB doble SP2T con impedancia integrada y detección de cargador

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat USB Port SP2T Switch Supports USB & UART datasheet (Rev. A) (Inglés)

TSU6111A

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Protocols

UART, USB 2.0

Configuration

1:2 SPDT

Number of channels

2

USB speed (Mbps)

480

Bandwidth (MHz)

920

Supply voltage (max) (V)

6.5

Supply voltage (min) (V)

3

Ron (typ) (mΩ)

8000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

ESD HBM (typ) (kV)

5

Operating temperature range (°C)

-40 to 85

COFF (typ) (pF)

7

CON (typ) (pF)

9

Off isolation (typ) (dB)

-26

Ron (max) (mΩ)

15000

Ron channel match (max) (Ω)

2

Turnoff time (disable) (max) (ns)

95000

Turnon time (enable) (max) (ns)

3500

Rating

Catalog

Protocols

UART, USB 2.0

Configuration

1:2 SPDT

Number of channels

2

USB speed (Mbps)

480

Bandwidth (MHz)

920

Supply voltage (max) (V)

6.5

Supply voltage (min) (V)

3

Ron (typ) (mΩ)

8000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

ESD HBM (typ) (kV)

5

Operating temperature range (°C)

-40 to 85

COFF (typ) (pF)

7

CON (typ) (pF)

9

Off isolation (typ) (dB)

-26

Ron (max) (mΩ)

15000

Ron channel match (max) (Ω)

2

Turnoff time (disable) (max) (ns)

95000

Turnon time (enable) (max) (ns)

3500

Rating

Catalog

UQFN (RSV)

16

4.68 mm² 2.6 x 1.8

Switch Matrix
- USB
- UART Supports USB 2.0 High Speed
Charger Detection
- USB BCDv1.1 Compliant
- VBUS Detection
- Data Contact Detection
- Primary and Secondary Detection
Compatible Accessories
- USB Chargers (DCP, CDP)
- Factory Cable
Additional Features
- I²C Interface with Host Processor
- Switches Controlled by Automatic Detection or Manual
  Control
- Interrupts Generated for Plug/Unplug
- Support Control Signals used In Manufacturing (JIG, BOOT)
Max Voltage
- 28V VBUS rating
ESD Performance Tested Per JESD 22
- 5000-V Human-Body Model
  (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
IEC ESD Performance
- ±8kV Contact Discharge (IEC 61000-4-2) for
  VBUS/DP_CON/DM_CON/ID_CON to GND
Surge Protection on VBUS/DP_CON/DM_CON
- USB Connector Pins Without External Component

Switch Matrix
- USB
- UART Supports USB 2.0 High Speed
Charger Detection
- USB BCDv1.1 Compliant
- VBUS Detection
- Data Contact Detection
- Primary and Secondary Detection
Compatible Accessories
- USB Chargers (DCP, CDP)
- Factory Cable
Additional Features
- I²C Interface with Host Processor
- Switches Controlled by Automatic Detection or Manual
  Control
- Interrupts Generated for Plug/Unplug
- Support Control Signals used In Manufacturing (JIG, BOOT)
Max Voltage
- 28V VBUS rating
ESD Performance Tested Per JESD 22
- 5000-V Human-Body Model
  (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
IEC ESD Performance
- ±8kV Contact Discharge (IEC 61000-4-2) for
  VBUS/DP_CON/DM_CON/ID_CON to GND
Surge Protection on VBUS/DP_CON/DM_CON
- USB Connector Pins Without External Component

The TSU6111A is a high performance differential autonomous SP2T switch with impedance detection. The switch supports the detection of various accessories that are attached through DP, DM, and ID. The charger detection satisfies USB charger specification v1.1 and V_{BUS_IN} has a 28V tolerance to eliminate the need for external protection. Power for this device is supplied through VBAT of the system or throughV_{BUS_IN} when attached to a charger.

The SP2T switch is controlled by the automatic detection logic or through manual configuration of the I²C. JIG and BOOT pins are used when a USB or UART JIG cable is used to test the device in the development and manufacturing. TSU6111A has open-drain JIG output (active low).

The TSU6111A is a high performance differential autonomous SP2T switch with impedance detection. The switch supports the detection of various accessories that are attached through DP, DM, and ID. The charger detection satisfies USB charger specification v1.1 and V_{BUS_IN} has a 28V tolerance to eliminate the need for external protection. Power for this device is supplied through VBAT of the system or throughV_{BUS_IN} when attached to a charger.

The SP2T switch is controlled by the automatic detection logic or through manual configuration of the I²C. JIG and BOOT pins are used when a USB or UART JIG cable is used to test the device in the development and manufacturing. TSU6111A has open-drain JIG output (active low).

filter

Buscar otro/a Protocolo e interruptores de bus y multiplexores

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	USB Port SP2T Switch Supports USB & UART datasheet (Rev. A)		06 ago 2012
	Application note	High-Speed Interface Layout Guidelines (Rev. J)	PDF \| HTML	24 feb 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

TSU6111A HSpice Model

SCDM148.ZIP (250 KB) - HSpice Model

Descargar

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
UQFN (RSV)	16	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TSU6111A

Interruptor Micro-USB doble SP2T con impedancia integrada y detección de cargador

TSU6111A

Detalles del producto

Documentación técnica

Diseño y desarrollo

TSU6111A HSpice Model

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos