84-pin (HFG) package image

ADS5474MHFGV 활성

RHA(방사능 손상 방지 보증), QMLV, 100krad, 세라믹, 14비트, 싱글, 400 MSPS ADC

활성 barcode 로트/날짜 로트 및 날짜 코드를 선택할 수 있습니다.

가격

수량 가격
+

품질 정보

등급 Space
RoHS 면제
REACH
MSL 등급/피크 리플로우 Level-NC-NC-NC
품질, 신뢰성
및 패키징 정보

포함된 정보:

  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
보기 또는 다운로드
추가 제조 정보

포함된 정보:

  • 팹 위치
  • 조립 위치
보기

수출 분류

*참조 목적

  • US ECCN: 3A001A2C

패키징 정보

패키지 | 핀 CFP (HFG) | 84
작동 온도 범위(°C) -55 to 125
패키지 수량 | 캐리어 1 | OTHER

ADS5474-SP의 주요 특징

  • 400 MSPS Sample Rate
  • 14 Bit Resolution, 10.9 Bits Effective Number of
    Bits (ENOB)
  • 5962R13208:
    • Radiation Hardness Assurance (RHA) up to
      TID 100 krad (Si)
    • Total Ionizing Dose 100 krad (Si)
    • ELDRS free 100 krad (Si)
    • SEL/SEU characterized
  • 1.28 GHz Input Bandwidth
  • SFDR = 78 dBc at 230 MHz and 400 MSPS
  • SNR = 69.8 dBFS at 230 MHz and 400 MSPS
  • 2.2 VPP Differential Input Voltage
  • LVDS-Compatible Outputs
  • Total Power Dissipation: 2.5 W
  • Power Down Mode: 50 mW
  • Offset Binary Output Format
  • Output Data Transitions on the Rising and Falling Edges
    of a Half-Rate Output Clock
  • On-Chip Analog Buffer, Track-and-Hold, and Reference
    Circuit
  • Available in a 84-Pin Ceramic Nonconductive Tie-Bar
    Package (HFG)
  • Military Temperature Range:
    –55°C to +125°C Tcase
  • Engineering Evaluation (/EM) Samples are Available(1)
  • Pin-Similar and Compatible With 12- and 14-Bit Family:
    ADS5463-SP and ADS5444-SP

ADS5474-SP에 대한 설명

The ADS5474 is a 14-bit, 400-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply while providing LVDS-compatible digital outputs. This ADC is one of a family of 12-, 13-, 14-bit ADCs that operate from 210 MSPS to 500 MSPS. The ADS5474 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high-impedance input. An internal reference generator is also provided to simplify the system design.

Designed with a 1.4-GHz input bandwidth for the conversion of wide-bandwidth signals that exceed 400 MHz of input frequency at 400 MSPS, the ADS5474 has outstanding low noise performance and spurious-free dynamic range over a large input frequency range.

The ADS5474 is available in an 84-pin ceramic nonconductive tie-bar package (HFG). The device is built on Texas Instruments complementary bipolar process (BiCom3) and is specified over the full military temperature range (–55°C to +125°C Tcase).

가격

수량 가격
+

캐리어 옵션

전체 릴, 맞춤형 수량의 릴, 절단 테이프, 튜브, 트레이 등 부품 수량에 따라 다양한 캐리어 옵션을 선택할 수 있습니다.

맞춤형 릴은 한 릴에서 절단 테이프의 연속 길이로, 로트 및 날짜 코드 추적 기능을 유지하여 요청한 정확한 양을 유지합니다. 업계 표준에 따라, 황동 심으로 절단 테이프 양쪽에 18인치 리더와 트레일러를 연결하여 자동화 조립 기계에 직접 공급합니다. TI는 맞춤형 수량의 릴 주문 시 릴 요금을 부과합니다.

절단 테이프란 릴에서 잘라낸 테이프 길이입니다. TI는 요청 수량을 맞추기 위해 여러 가닥의 절단 테이프 또는 박스를 사용하여 주문을 이행할 수 있습니다.

TI는 종종 재고 가용성에 따라 튜브 또는 트레이 디바이스를 박스나 튜브 또는 트레이로 배송합니다. TI는 내부 정전 방전 및 습도 민감성 수준 보호 요구 사항에 따라 모든 테이프, 튜브 또는 샘플 박스를 포장합니다.

자세히 보기

로트 및 날짜 코드를 선택할 수 있습니다.

장바구니에 수량을 추가하고 결제 프로세스를 시작하여 기존 재고에서 로트 또는 날짜 코드를 선택할 수 있는 옵션을 확인합니다.

자세히 보기