ADS5474-SP
- Sample rate: 400MSPS
- 14-Bit resolution, 10.9 bits effective number of bits (ENOB)
- 5962R13208:
- Radiation hardness assurance (RHA): up to TID 100krad (Si)
- Total ionizing dose: 100krad (Si)
- ELDRS free: 100krad (Si)
- SEL/SEU Characterized
- Input bandwidth: 1.28GHz
- SFDR = 78dBc at 230MHz and 400MSPS
- SNR = 69.8dBFS at 230MHz and 400MSPS
- Differential input voltage: 2.2VPP
- LVDS-Compatible outputs
- Total power dissipation: 2.5W
- Power down mode: 50mW
- Offset binary output format
- Output data transitions on the rising and falling edges of a half-rate output clock
- On-chip analog buffer, track-and-hold, and reference circuit
- Available in an 84-pin ceramic non-conductive tie-bar package (HFG)
- Military temperature range: –55°C to 125°C Tcase
- Engineering evaluation (/EM) samples are available (1)
- Pin-similar and compatible with 12- and 14-bit family: ADS5463-SP and ADS5444-SP
(1)These units are intended for engineering evaluation only. They are processed to a non-compliant flow (e.g. No Burn-In, etc.) and are tested to a temperature rating of 25°C only. These units are not suitable for qualification, production, radiation testing or flight use. Parts are not warranted for performance over the full MIL specified temperature range of –55°C to 125°C or operating life.
The ADS5474 is a 14-bit, 400MSPS analog-to-digital converter (ADC) that operates from both a 5V supply and 3.3V supply while providing LVDS-compatible digital outputs. This ADC is one of a family of 12-, 13-, 14-bit ADCs that operate from 210MSPS to 500MSPS. The ADS5474 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high-impedance input. An internal reference generator is also provided to simplify the system design.
Designed with a 1.4GHz input bandwidth for the conversion of wide-bandwidth signals that exceed 400MHz of input frequency at 400MSPS, the ADS5474 has outstanding low noise performance and spurious-free dynamic range over a large input frequency range.
The ADS5474 is available in an 84-pin ceramic non-conductive tie-bar package (HFG). The device is built on Texas Instruments complementary bipolar process (BiCom3) and is specified over the full military temperature range (–55°C to 125°C Tcase).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADS5474-SP Class V, 14-bit, 400MSPS Analog-to-Digital Converter datasheet (Rev. B) | PDF | HTML | 2025. 11. 10 | |
| * | 방사능 및 안정성 보고서 | ADS5474 SEE Report | 2014. 7. 8 | ||
| * | SMD | ADS5474-SP SMD 5962-07246 | 2016. 10. 19 | ||
| 선택 가이드 | TI Space Products (Rev. L) | 2026. 3. 27 | |||
| Application brief | DLA Approved Optimizations for QML Products (Rev. C) | PDF | HTML | 2025. 6. 17 | ||
| 애플리케이션 노트 | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) | PDF | HTML | 2025. 6. 10 | ||
| 추가 자료 | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) | 2025. 2. 20 | |||
| 애플리케이션 노트 | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 2022. 10. 19 | ||
| 기술 문서 | 7 things to know about spacecraft subsystems before your next trip to Mars | PDF | HTML | 2016. 7. 6 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| CFP (HFG) | 84 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.