32-pin (RHB) package image

CC1120RHBT 활성

협대역 시스템용 고성능 Sub-1GHz 무선 트랜시버

활성 custom-reels 맞춤형 맞춤형 수량의 릴을 구매할 수 있음

가격

수량 가격
+

추가 패키지 수량 | 캐리어 옵션 이 제품들은 정확히 동일하지만 다른 캐리어 유형으로 제공됩니다.

CC1120RHBR 활성 custom-reels 맞춤형 맞춤형 수량의 릴을 구매할 수 있음
패키지 수량 | 캐리어 3,000 | LARGE T&R
재고
수량 | 가격 1ku | +

품질 정보

등급 Catalog
RoHS
REACH
납 마감/볼 재질 NIPDAU | NIPDAUAG
MSL 등급/피크 리플로우 Level-3-260C-168 HR
품질, 신뢰성
및 패키징 정보

포함된 정보:

  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
보기 또는 다운로드
추가 제조 정보

포함된 정보:

  • 팹 위치
  • 조립 위치
보기

수출 분류

*참조 목적

  • US ECCN: 5A991B

패키징 정보

패키지 | 핀 VQFN (RHB) | 32
작동 온도 범위(°C) -40 to 85
패키지 수량 | 캐리어 250 | SMALL T&R

CC1120의 주요 특징

  • High-Performance, Single-Chip Transceiver
    • Adjacent Channel Selectivity:
      64 dB at 12.5-kHz Offset
    • Blocking Performance: 91 dB at 10 MHz
    • Excellent Receiver Sensitivity:
      • –123 dBm at 1.2 kbps
      • –110 dBm at 50 kbps
      • –127 dBm Using Built-in Coding Gain
    • Very Low Phase Noise:
      –111 dBc/Hz at 10-kHz Offset
  • Suitable for Systems Targeting ETSI Category 1
    Compliance in 169-MHz and 433-MHz Bands
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz
    Channel in Compliance With FCC Narrowbanding
    Mandate)
  • Separate 128-Byte RX and TX FIFOs
  • Support for Seamless Integration With the CC1190
    Device for Increased Range Giving up to 3-dB
    Improvement in Sensitivity and up to +27-dBm
    Output Power
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • RX: 2 mA in RX Sniff Mode
      • RX: 17 mA Peak Current in Low-Power
        Mode
      • RX: 22 mA Peak Current in
        High-Performance Mode
      • TX: 45 mA at +14 dBm
    • Power Down: 0.12 µA
      (0.5 µA With eWOR Timer Running)
  • Programmable Output Power up to +16 dBm With
    0.4-dB Step Size
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,

    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • WaveMatch: Advanced Digital Signal Processing
    for Improved Sync Detect Performance
  • RoHS-Compliant 5-mm × 5-mm No-Lead QFN
    32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting
    Compliance With
    • Europe: ETSI EN 300 220, ETSI EN 54-25
    • US: FCC CFR47 Part 15, FCC CFR47 Part 90,
      24, and 101
    • Japan: ARIB RCR STD-T30,
      ARIB STD-T67, ARIB STD-T108
  • Peripherals and Support Functions
    • Enhanced Wake-On-Radio (eWOR)
      Functionality for Automatic Low-Power Receive
      Polling
    • Includes Functions for Antenna Diversity Support
    • Support for Retransmissions
    • Support for Automatic Acknowledge of Received
      Packets
    • TCXO Support and Control, Also in Power
      Modes
    • Automatic Clear Channel Assessment (CCA) for
      Listen-Before-Talk (LBT) Systems
    • Built-in Coding Gain Support for Increased
      Range and Robustness
    • Digital RSSI Measurement
    • Temperature Sensor

CC1120에 대한 설명

The CC1120 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for Industrial, Scientific, and Medical (ISM) applications and Short Range Device (SRD) frequency bands at 164 to 192 MHz, 274 to 320 MHz, 410 to 480 MHz, and 820 to 960 MHz.

The CC1120 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters of the CC1120 device can be controlled through an SPI interface. In a typical system, the CC1120 device is used with a microcontroller and only a few external passive components.

가격

수량 가격
+

추가 패키지 수량 | 캐리어 옵션 이 제품들은 정확히 동일하지만 다른 캐리어 유형으로 제공됩니다.

CC1120RHBR 활성 custom-reels 맞춤형 맞춤형 수량의 릴을 구매할 수 있음
패키지 수량 | 캐리어 3,000 | LARGE T&R
재고
수량 | 가격 1ku | +

캐리어 옵션

전체 릴, 맞춤형 수량의 릴, 절단 테이프, 튜브, 트레이 등 부품 수량에 따라 다양한 캐리어 옵션을 선택할 수 있습니다.

맞춤형 릴은 한 릴에서 절단 테이프의 연속 길이로, 로트 및 날짜 코드 추적 기능을 유지하여 요청한 정확한 양을 유지합니다. 업계 표준에 따라, 황동 심으로 절단 테이프 양쪽에 18인치 리더와 트레일러를 연결하여 자동화 조립 기계에 직접 공급합니다. TI는 맞춤형 수량의 릴 주문 시 릴 요금을 부과합니다.

절단 테이프란 릴에서 잘라낸 테이프 길이입니다. TI는 요청 수량을 맞추기 위해 여러 가닥의 절단 테이프 또는 박스를 사용하여 주문을 이행할 수 있습니다.

TI는 종종 재고 가용성에 따라 튜브 또는 트레이 디바이스를 박스나 튜브 또는 트레이로 배송합니다. TI는 내부 정전 방전 및 습도 민감성 수준 보호 요구 사항에 따라 모든 테이프, 튜브 또는 샘플 박스를 포장합니다.

자세히 보기

로트 및 날짜 코드를 선택할 수 있습니다.

장바구니에 수량을 추가하고 결제 프로세스를 시작하여 기존 재고에서 로트 또는 날짜 코드를 선택할 수 있는 옵션을 확인합니다.

자세히 보기