首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADC12130

現行

具 2 通道多工器和取樣/保持功能的自校準 12 位元 + 訊號序列 I/O A/D 轉換器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
ADC122S625 現行 雙 12 位元、50 kSPS 至 200 kSPS、同步取樣 A/D 轉換器 Simultaneous sampling ADC

ADC12130

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 12 Sample rate (max) (ksps) 114 Number of input channels 2 Interface type Microwire (Serial I/O), SPI Architecture SAR Input type Differential, Pseudo-Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 22.5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 3 Digital supply (max) (V) 5.5
Resolution (Bits) 12 Sample rate (max) (ksps) 114 Number of input channels 2 Interface type Microwire (Serial I/O), SPI Architecture SAR Input type Differential, Pseudo-Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 22.5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 3 Digital supply (max) (V) 5.5
SOIC (DW) 16 106.09 mm² (10.3 mm × 10.3 mm)
  • Serial I/O (MICROWIRE, SPI and QSPI Compatible)
  • Power Down Mode
  • Programmable Acquisition Time
  • Variable Digital Output Word Length and Format
  • No Zero or Full Scale Adjustment Required
  • 0V to 5V Analog Input Range with Single 5V Power Supply

Key Specifications

  • Resolution 12-bit plus sign
  • 12-Bit plus sign conversion time 8.8 μs (max)
  • 12-Bit plus sign throughput time 14 μs (max)
  • Integral Linearity Error ±2 LSB (max)
  • Single Supply 3.3V or 5V ±10%
  • Power Consumption
    • +3.3V 15 mW (max)
    • +3.3V power down 40 μW (typ)
    • +5V 33 mW (max)
    • +5V power down 100 μW (typ)

All trademarks are the property of their respective owners.

  • Serial I/O (MICROWIRE, SPI and QSPI Compatible)
  • Power Down Mode
  • Programmable Acquisition Time
  • Variable Digital Output Word Length and Format
  • No Zero or Full Scale Adjustment Required
  • 0V to 5V Analog Input Range with Single 5V Power Supply

Key Specifications

  • Resolution 12-bit plus sign
  • 12-Bit plus sign conversion time 8.8 μs (max)
  • 12-Bit plus sign throughput time 14 μs (max)
  • Integral Linearity Error ±2 LSB (max)
  • Single Supply 3.3V or 5V ±10%
  • Power Consumption
    • +3.3V 15 mW (max)
    • +3.3V power down 40 μW (typ)
    • +5V 33 mW (max)
    • +5V power down 100 μW (typ)

All trademarks are the property of their respective owners.

NOTE: Some device/package combinations are obsolete and are described and shown here for reference only. See our web site for product availability.

The ADC12130, ADC12132 and ADC12138 are 12-bit plus sign successive approximation Analog-to-Digital converters with serial I/O and configurable input multiplexer. The ADC12132 and ADC12138 have a 2 and an 8 channel multiplexer, respectively. The differential multiplexer outputs and ADC inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12130 has a two channel multiplexer with the multiplexer outputs and ADC inputs internally connected. The ADC12130 family is tested and specified with a 5 MHz clock. On request, these ADCs go through a self calibration process that adjusts linearity, zero and full-scale errors to typically less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with NSC MICROWIRE. For voltage references, see the LM4040, LM4050 or LM4041.

NOTE: Some device/package combinations are obsolete and are described and shown here for reference only. See our web site for product availability.

The ADC12130, ADC12132 and ADC12138 are 12-bit plus sign successive approximation Analog-to-Digital converters with serial I/O and configurable input multiplexer. The ADC12132 and ADC12138 have a 2 and an 8 channel multiplexer, respectively. The differential multiplexer outputs and ADC inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12130 has a two channel multiplexer with the multiplexer outputs and ADC inputs internally connected. The ADC12130 family is tested and specified with a 5 MHz clock. On request, these ADCs go through a self calibration process that adjusts linearity, zero and full-scale errors to typically less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with NSC MICROWIRE. For voltage references, see the LM4040, LM4050 or LM4041.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADC12130/32/38 Self-Cal 12-Bit + Serial I/O ADC w/MUX and Sample/Hold datasheet (Rev. G) 2013/3/25
電子書 Best of Baker's Best: Precision Data Converters -- SAR ADCs 2015/5/21

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片