ADS1248
- 24 Bits, No Missing Codes
- Programmable Data Rates Up to 2 kSPS
- Single-Cycle Settling for All Data Rates
- Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS
- Analog Multiplexer With 8 (ADS1248) and 4
(ADS1247) Independently Selectable Inputs - Low-Noise PGA: 48 nVRMS at PGA = 128
- Dual-Matched Programmable Excitation Current Sources
- Low-Drift Internal 2.048-V Reference:
10 ppm/°C (Maximum) - Sensor Burn-Out Detection
- 4 or 8 General-Purpose I/Os (ADS1247, ADS1248)
- Internal Temperature Sensor
- Power Supply and VREF Monitoring (ADS1247, ADS1248)
- Self and System Calibration
- SPI™-Compatible Serial Interface
- Analog Supply: Unipolar (2.7 V to 5.25 V) and Bipolar (±2.5 V) Operation
- Digital Supply: 2.7 V to 5.25 V
- Operating Temperature 40°C to 125°C
- APPLICATIONS
- Temperature Sensor Measurements:
- RTDs, Thermocouples, and Thermistors
- Pressure Measurements
- Flow Meters
- Factory Automation and Process Controls
- Temperature Sensor Measurements:
All other trademarks are the property of their respective owners
The ADS1246, ADS1247, and ADS1248 are highly-integrated, precision, 24-bit analog-to-digital converters (ADCs). The devices feature an onboard, low-noise, programmable gain amplifier (PGA), a precision delta-sigma (ΔΣ) ADC with a single-cycle settling digital filter, and an internal oscillator. The ADS1247 and ADS1248 also provide a built-in, very low drift voltage reference with 10-mA output capacity, and two matched programmable current digital-to-analog converters (DACs). The devices provide a complete front-end solution for temperature sensor applications including thermal couples, thermistors, and resistance temperature detectors (RTDs).
An input multiplexer supports four differential inputs for the ADS1248, two for the ADS1247, and one for the ADS1246. In addition, the multiplexer has a sensor burn-out detect, voltage bias for thermocouples, system monitoring, and general-purpose digital I/Os (ADS1247 and ADS1248). The onboard, low-noise PGA provides selectable gains of 1 to 128. The ΔΣ modulator and adjustable digital filter settle in only one cycle, for fast channel cycling when using the input multiplexer, and support data rates up to 2 kSPS. For data rates of 20 SPS or less, both 50-Hz and 60-Hz interference are rejected by the filter.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS1248EVM-PDK — 適用於 24 位元、2-kSPS、八通道 ΔΣ ADC 的 ADS1248 性能展示套件
ADS1248 評估模組 (EVM) 性能展示套件 (PDK) 是一款評估 ADS1248 八通道、24 位元、高精密 delta-sigma (ΔΣ) 類比數位轉換器 (ADC) 的平台。EVM 採用可輕鬆接受各種類型類比溫度感測器的設計,包括電阻溫度偵測器 (RTD)、熱電偶和熱敏電阻。
該套件包括 ADS1248EVM 及精密 ADC 主機板 (PAMBoard)。評估軟體讓使用者能透過通用序列匯流排 (USB) 與 ADC 通訊、擷取資料並執行資料分析。
SBAC144 — ADS1x4x Firmware Example Code
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
PMP40280 — 雙向電池初始化系統控制電路板參考設計
TIDA-00110 — 適用於使用 RTD 的智慧電網應用中的溫度感測的類比前端 (AFE)
此參考設計允許透過一個 ADC 連接多達 4 個電阻溫度偵測器 (RTD) ,以確保解決方案兼具精巧與模組化特色。透過 SPI 介面負責 ADC 與處理器的通訊。若該應用領域需要 8 個 RTD,只要再連結一個同類模組即可。此解決方案具備彈性,可處理 2 線、3 線或 4 線類型 RTD。
TIDA-00463 — 基於通量閘的位移感測器參考設計
TIDA-00463 展示了一種用於線性距離測量的位移感測器,採用 TI LaunchPad 的 BoosterPack 外形尺寸。 此設計適用於需要距離測量的任何應用 (即使是透過非磁性材料進行測量),也適用於需要非接觸式、無磨損測量的應用。 透過使用磁通量閘技術,此設計可涵蓋廣泛的測量距離,同時具備高解析度與準確度。
TIPD120 — 3 線 RTD 擷取系統,可準確量測 -200°C - 850°C 的溫度
This TI Precision Verified Design provides the theory, component selection, simulation, complete PCB schematic & layout, bill of materials, and measured performance of a single-supply, 3-wire RTD acquisition system that accurately measures temperature from -200°C - 850°C. (...)
TIPD164 — 適用於工業輸出和溫度感測器的類比輸入模組參考設計
此經精準驗證的參考設計實作了適用於工業電壓、電流與溫度感測器的類比輸入模組。 對於工業輸出,可能的輸入範圍包含:4 至 20mA、0 至 20mA、+/-25mA、0 至 5V、0 至 10V、+/-5V 與 +/-10V。此設計包含調節與位準偏移電路,可將大型工業輸出轉換為 +5V ΔΣ ADC 的適當輸入範圍。該 ADC 具備直接在其整個溫度範圍內從 RTD 與熱電偶感測器擷取資訊的功能。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 28 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。