ADS7038H
- Small package size:
- WQFN 3mm × 3mm
- 8 channels configurable as any combination of:
- Up to 8 analog inputs, digital inputs, or digital outputs
- GPIOs for I/O expansion:
- Open-drain, push-pull digital outputs
- Analog watchdog:
- Programmable thresholds per channel
- Event counter for transient rejection
- Wide operating ranges:
- AVDD: 2.35V to 5.5V
- DVDD: 1.65V to 5.5V
- –40°C to +125°C temperature range
- Enhanced-SPI digital interface:
- High-speed, 60MHz interface
- Achieve full throughput with >13.5MHz SPI
- CRC for read/write operation:
- CRC on data read/write
- CRC on power-up configuration
- Programmable averaging filters:
- Programmable sample size for averaging
- Averaging with internal conversions
- 16-bit resolution
The ADS7038 is an easy-to-use, 8-channel, multiplexed, 12-bit, successive approximation register analog-to-digital converter (SAR ADC). The eight channels can be independently configured as either analog inputs, digital inputs, or digital outputs. The device has an internal oscillator for the ADC conversion process.
The ADS7038 communicates through an SPI-compatible interface and operates in either autonomous or single-shot conversion mode. The ADS7038 implements the analog watchdog function by event-triggered interrupts per channel using a digital window comparator with programmable high and low thresholds, hysteresis, and an event counter. The ADS7038 has a built-in cyclic redundancy check (CRC) for data read/write operations and the power-up configuration.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | ADS7038x Small, 8-Channel, 12-Bit ADC With SPI Interface, GPIOs, and CRC datasheet (Rev. C) | PDF | HTML | 2024/9/5 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS7038Q1EVM-PDK — ADS7038-Q1 8 通道、1-MSPS、12 位元 ADC 評估模組性能示範套件 (PDK)
ADS7038-Q1 評估模組 (EVM) 性能示範套件 (PDK) 是用於評估 ADS7038-Q1 漸近法暫存器 (SAR) 類比轉數位轉換器 (ADC) 性能的平台。ADS7038Q1EVM-PDK 提供電源與通訊卡,可透過 I/O 擴展器 ADC 輕鬆連接至類比、奈米功率、八輸入通道產品。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。