首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS7067

現行

具 GPIO 和 SPI 的 8 通道、800-kSPS 16 位元 SAR 類比轉數位轉換器 (ADC)

立即訂購
產品規格表

ADS7067

現行
立即訂購

產品詳細資料

Resolution (Bits) 16 Sample rate (max) (ksps) 800 Number of input channels 8 Interface type SPI Architecture SAR Input type Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 85.3 Digital supply (min) (V) 1.65 Digital supply (max) (V) 5.5
Resolution (Bits) 16 Sample rate (max) (ksps) 800 Number of input channels 8 Interface type SPI Architecture SAR Input type Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 85.3 Digital supply (min) (V) 1.65 Digital supply (max) (V) 5.5
WQFN (RTE) 16 9 mm² (3 mm × 3 mm) DSBGA (YBH) 16 2.56 mm² (0 mm × 0 mm)
  • Package options:
    • 1.636mm × 1.636mm DSBGA and 3mm × 3mm WQFN
    • Space-saving, capless, 2.5V internal reference
  • 8 channels configurable as any combination of:
    • Up to 8 analog inputs, digital inputs, or digital outputs
  • Programmable averaging filters:
    • Programmable sample size for averaging
    • Averaging with internal conversions
    • 20-bit resolution for average output
  • Low-leakage multiplexer with channel sequencer:
    • Manual mode
    • On-the-fly mode
    • Auto-sequence mode
  • Excellent AC and DC performance:
    • SNR: 90dB, THD: –100dB
    • Improved SNR with programmable averaging filters
    • INL: ±1LSB, 16-bit no missing codes
    • Internal calibration improves offset and drift
    • High sample rate with no latency output: 800kSPS
  • Wide operating range:
    • ADC input range: 0V to VREF and 2 × VREF
    • Analog supply: 3V to 5.5V
    • Digital supply: 1.65V to 5.5V
    • Temperature range: –40°C to +125°C
  • Enhanced-SPI digital interface:
    • High-speed, 60MHz SPI interface
  • Package options:
    • 1.636mm × 1.636mm DSBGA and 3mm × 3mm WQFN
    • Space-saving, capless, 2.5V internal reference
  • 8 channels configurable as any combination of:
    • Up to 8 analog inputs, digital inputs, or digital outputs
  • Programmable averaging filters:
    • Programmable sample size for averaging
    • Averaging with internal conversions
    • 20-bit resolution for average output
  • Low-leakage multiplexer with channel sequencer:
    • Manual mode
    • On-the-fly mode
    • Auto-sequence mode
  • Excellent AC and DC performance:
    • SNR: 90dB, THD: –100dB
    • Improved SNR with programmable averaging filters
    • INL: ±1LSB, 16-bit no missing codes
    • Internal calibration improves offset and drift
    • High sample rate with no latency output: 800kSPS
  • Wide operating range:
    • ADC input range: 0V to VREF and 2 × VREF
    • Analog supply: 3V to 5.5V
    • Digital supply: 1.65V to 5.5V
    • Temperature range: –40°C to +125°C
  • Enhanced-SPI digital interface:
    • High-speed, 60MHz SPI interface

The ADS7067 is a small, 16-bit, 8-channel, high-precision successive-approximation register (SAR) analog-to-digital converter (ADC). The ADS7067 has an integrated capless reference and a reference buffer that helps reduce the overall solution size by requiring fewer external components. The wafer-level-chip-scale package and fewer external components make this device designed for space-constrained applications. The device family includes the ADS7067 (800kSPS) and the ADS7066 (250kSPS) speed variants.

The ADS7067 features built-in offset calibration for improved accuracy over wide operating conditions of the system. The programmable averaging filters enable higher resolution measurement. The eight channels of the ADS7067 can be individually configured as analog inputs, digital inputs, or digital outputs that enable smaller system size and simplify circuit design for mixed signal feedback and digital control.

The enhanced-SPI enables the ADS7067 in achieving high throughput at lower clock speeds, thereby simplifying the board layout and lowering system cost. The ADS7067 features a cyclic redundancy check (CRC) for data read and write operations and the power-up configuration.

The ADS7067 is a small, 16-bit, 8-channel, high-precision successive-approximation register (SAR) analog-to-digital converter (ADC). The ADS7067 has an integrated capless reference and a reference buffer that helps reduce the overall solution size by requiring fewer external components. The wafer-level-chip-scale package and fewer external components make this device designed for space-constrained applications. The device family includes the ADS7067 (800kSPS) and the ADS7066 (250kSPS) speed variants.

The ADS7067 features built-in offset calibration for improved accuracy over wide operating conditions of the system. The programmable averaging filters enable higher resolution measurement. The eight channels of the ADS7067 can be individually configured as analog inputs, digital inputs, or digital outputs that enable smaller system size and simplify circuit design for mixed signal feedback and digital control.

The enhanced-SPI enables the ADS7067 in achieving high throughput at lower clock speeds, thereby simplifying the board layout and lowering system cost. The ADS7067 features a cyclic redundancy check (CRC) for data read and write operations and the power-up configuration.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
ADS7066 現行 具內部參考、GPIO 和 SPI 的八通道、250-kSPS、16 位元類比轉數位轉換器 ADS7066 is a lower-speed variant of ADS7067.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADS7067 Small, 8-Channel, 16-Bit, 800-kSPS SAR ADC With GPIOs datasheet (Rev. B) PDF | HTML 2024/9/18
應用說明 A Simple, Java-Based CRC Calculator PDF | HTML 2026/3/4

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS7066EVM-PDK — 適用於八通道、250-kSPS、16 位元、內部參考 ADC 的 ADS7066 性能展示套件

ADS7066 評估模組 (EVM) 性能示範套件 (PDK) 是用於評估 ADS7066 漸近法暫存器 (SAR) 類比轉數位轉換器 (ADC) 性能的平台

ADS7066EVM-PDK 提供電源與通訊卡，並搭載圖形使用者介面 (GUI)，可快速評估性能與功能，並可輕易地透過 I/O 擴展器連接 8 輸入通道零件。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
支援軟體

ADS7066-C-EXAMPLE-CODE — ADS7066 example C code

Expedite your embedded design using this example C code for the ADS7066 product family
支援產品和硬體
模擬型號

ADS7066 IBIS Model

SBAM441.ZIP (71 KB) - IBIS 模型
支援產品和硬體
模擬型號

ADS7066 TINA-TI Reference Design

SBAM445.TSC (22 KB) - TINA-TI 參考設計
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
計算工具

SBAR007 — ADS7066 CRC Calculator

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 16 Ultra Librarian
DSBGA (YBH) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片