產品詳細資料

Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 16 Interface type SPI Architecture SAR Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5, 6.25, 10, 12.5, 25, 50 Input voltage range (min) (V) -50, -25, -12.5, -10, -6.25, -5, -2.5 Features Over-Voltage Protection, PGA Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 230 Analog supply voltage (min) (V) 1.7, 4.75 Analog supply voltage (max) (V) 1.9, 5.25 SNR (dB) 88 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 16 Interface type SPI Architecture SAR Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5, 6.25, 10, 12.5, 25, 50 Input voltage range (min) (V) -50, -25, -12.5, -10, -6.25, -5, -2.5 Features Over-Voltage Protection, PGA Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 230 Analog supply voltage (min) (V) 1.7, 4.75 Analog supply voltage (max) (V) 1.9, 5.25 SNR (dB) 88 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
VQFN (RSK) 64 64 mm² (8 mm × 8 mm)
  • 16-channel, 16-bit Simultaneous Sampling ADC
    • 1MSPS throughput on each channel
  • Integrated programmable gain amplifier
    • 1MΩ analog input impedance
    • Supports single-ended and differential inputs
    • Input ranges:
      • Differential input voltage: ±50V, ±25V, ±12.5V, ±10V, ±6.25V, ±5V, ±2.5V
      • Common mode voltage: ±40V
  • Analog bandwidth options: 25kHz and 400kHz
  • Open-wire safe inputs
    • Near zero ADC output code for floating inputs
  • Typical performance:
    • INL: ±0.5LSB; DNL: ±0.5LSB
    • SNR: 88dB; THD: –103dB; DC CMRR: 100dB
  • Low-drift, on-chip reference (4.096V) and buffer
    • 15ppm/°C typical temperature drift
  • Digital features
    • On-chip digital filters for oversampling
    • System offset, gain and phase calibration
    • Digital window comparators
    • ADC output data randomizer
  • Power Supply
    • Analog supplies: 5V and 1.8V
    • Digital I/O supply: 1.8V to 3.3V
  • Temperature range: –40°C to +125°C
  • 16-channel, 16-bit Simultaneous Sampling ADC
    • 1MSPS throughput on each channel
  • Integrated programmable gain amplifier
    • 1MΩ analog input impedance
    • Supports single-ended and differential inputs
    • Input ranges:
      • Differential input voltage: ±50V, ±25V, ±12.5V, ±10V, ±6.25V, ±5V, ±2.5V
      • Common mode voltage: ±40V
  • Analog bandwidth options: 25kHz and 400kHz
  • Open-wire safe inputs
    • Near zero ADC output code for floating inputs
  • Typical performance:
    • INL: ±0.5LSB; DNL: ±0.5LSB
    • SNR: 88dB; THD: –103dB; DC CMRR: 100dB
  • Low-drift, on-chip reference (4.096V) and buffer
    • 15ppm/°C typical temperature drift
  • Digital features
    • On-chip digital filters for oversampling
    • System offset, gain and phase calibration
    • Digital window comparators
    • ADC output data randomizer
  • Power Supply
    • Analog supplies: 5V and 1.8V
    • Digital I/O supply: 1.8V to 3.3V
  • Temperature range: –40°C to +125°C

The ADS9324C is a 16-channel, integrated data acquisition (DAQ) system based on a simultaneous-sampling, 16-bit successive approximation (SAR) analog-to-digital converter (ADC) operating at a maximum of 1MSPS per channel. The device features a complete analog front-end for each channel, including a programmable gain amplifier (PGA) with input impedance of 1MΩ, input clamp, low-pass filter, and an ADC input driver. The device also features a low-drift, precision reference with a buffer to drive the ADC. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. The device supports both differential and single-ended inputs, allowing the device to be used with various sensor outputs.

The ADS9324C includes a flexible digital interface allowing the device to be used with a variety of host controllers. Users can configure the serial interface to read the ADC output on 1-lane, 2-lane, 4-lane, and 8-lane. The device also has flexibility to operate the ADC as 2-CH, 4-CH, 8-CH and 16-CH simultaneous sampling ADC.

The ADS9324C is a 16-channel, integrated data acquisition (DAQ) system based on a simultaneous-sampling, 16-bit successive approximation (SAR) analog-to-digital converter (ADC) operating at a maximum of 1MSPS per channel. The device features a complete analog front-end for each channel, including a programmable gain amplifier (PGA) with input impedance of 1MΩ, input clamp, low-pass filter, and an ADC input driver. The device also features a low-drift, precision reference with a buffer to drive the ADC. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. The device supports both differential and single-ended inputs, allowing the device to be used with various sensor outputs.

The ADS9324C includes a flexible digital interface allowing the device to be used with a variety of host controllers. Users can configure the serial interface to read the ADC output on 1-lane, 2-lane, 4-lane, and 8-lane. The device also has flexibility to operate the ADC as 2-CH, 4-CH, 8-CH and 16-CH simultaneous sampling ADC.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADS9324C 16 -Bit, 1MSPS , 16 -Channel, Precision ADC With 80Vpp Common-Mode Difference Amplifier datasheet PDF | HTML 2026/6/4

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSK) 64 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片