BQ25175
- Input voltage up to 30-V tolerant
- Automatic Sleep Mode for low power consumption
- 350-nA battery leakage current
- 80-µA input leakage current when charge disabled
- Supports 1-cell Li-Ion, and Li-Poly
-
Fixed 4.35-V battery regulation voltage
- External resistor programmable operation
- ISET to set charge current from 10 mA to 800 mA
- High accuracy
- ±0.5% charge voltage accuracy
- ±10% charge current accuracy
- Charging features
- Precharge current 20% of ISET
- Termination current 10% of ISET
- NTC thermistor input to monitor battery temperature
- Cold and hot temperature charging disabled
- Cool temperature charging at 20% of ISET
- TS pin for charging function control
- Open-drain output for status and fault indication
- Integrated fault protection
- 6.6-V IN overvoltage protection
- 1000-mA overcurrent protection
- 125°C thermal regulation; 150°C thermal shutdown protection
- OUT short-circuit protection
- ISET pin short/open protection
The BQ25175 is an integrated 800-mA linear charger for 1-cell Li-Ion and Li-Poly batteries. The device has a single power output that charges the battery. The system load can be placed in parallel with the battery, as long as the average system load does not prevent the battery from charging fully within the safety timer duration. When the system load is placed in parallel with the battery, the charge current is shared between the system and the battery.
The device has three phases for charging a Li-Ion/Li-Poly battery: precharge to recover a fully discharged battery, fast-charge constant current to supply the bulk of the charge, and voltage regulation to reach full capacity.
In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold, TREG, is exceeded.
The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and automatic charge termination. The fast charge current is programmable through an external resistor. The precharge and termination current thresholds track the fast charge current setting.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | BQ25175 Standalone 1-Cell 800-mA Linear Battery Charger with 4.35-V Charge Voltage and Charging Indication datasheet (Rev. A) | PDF | HTML | 2021年 9月 23日 |
| Application note | BQ25171-Q1 Quick Start Guide | PDF | HTML | 2021年 9月 29日 | |
| EVM User's guide | BQ25175EVM User's Guide | 2021年 5月 26日 | ||
| Certificate | BQ25175EVM EU RoHS Declaration of Conformity (DoC) | 2021年 5月 21日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
BQ25175EVM — 適用於 1 芯鋰離子電池的 BQ25175 評估模組 800-mA 線性電池充電器
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YBG) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。