首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC
最新

BQ25640

現行

具有 18-V 最大輸入、Type-C 偵測和 OTG 輸出的 I2C 控制 1 芯 5-A 降壓電池充電器

立即訂購
產品規格表

BQ25640

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 5 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Moisture detection, Power Path, USB C/PD compatible, USB OTG integrated, USB Type-C detection, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 18 Absolute max Vin (max) (V) 26 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 5 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Moisture detection, Power Path, USB C/PD compatible, USB OTG integrated, USB Type-C detection, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 18 Absolute max Vin (max) (V) 26 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
WQFN-FCRLF (VDL) 23 8.75 mm² 3.5 x 2.5
  • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery
    • >90% efficiency down to 10mA output current from 5V input
    • Charge current up to 5A in 20mA steps
    • Charge termination from 30 to 1000mA in 10mA steps
    • Highly configurable JEITA profile for safe charging over temperature
  • Fully Integrated CC Controller with Dual Role Power (DRP), Try.SNK and Try.SRC
  • BATFET control to support shutdown, ship mode and full system reset
    • 1.5µA quiescent current in battery only mode
    • 0.15µA battery leakage current in ship mode
    • 0.1µA battery leakage current in shutdown mode
  • Supports USB On-The-Go (OTG) and SRC mode
    • Reverse mode with 3.84V to 9.6V output
    • Programmable current limit up to 3.2A
  • Supports a wide range of input sources
    • 3.9V to 18V input operating voltage range with 26V absolute max input voltage
    • Supports USB Type-C inputs, USB BC1.2, HVDCP, and Non-Standard Adapters
    • Supports IINDPM Range from 10mA to 3.2A
    • API (Alternate Power from Input) mode for low power input sources down to 10mA
    • VINDPM automatically tracks battery voltage
    • Input Current Optimizer (ICO) maximizes input power without overloading adapters
  • Efficient battery operation with 7mΩ BATFET
  • Narrow VDC (NVDC) power path management
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • Flexible autonomous or I2C-controlled modes
  • Integrated 12-bit ADC for voltage, current, and temperature monitoring
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% charge current regulation
    • ±5% input current regulation
  • Safety
    • Liquid detection and corrosion mitigation (Patent Pending)
    • Thermal regulation and thermal shutdown
    • Input/system/battery overvoltage and overcurrent protection
    • Charging safety timer
  • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery
    • >90% efficiency down to 10mA output current from 5V input
    • Charge current up to 5A in 20mA steps
    • Charge termination from 30 to 1000mA in 10mA steps
    • Highly configurable JEITA profile for safe charging over temperature
  • Fully Integrated CC Controller with Dual Role Power (DRP), Try.SNK and Try.SRC
  • BATFET control to support shutdown, ship mode and full system reset
    • 1.5µA quiescent current in battery only mode
    • 0.15µA battery leakage current in ship mode
    • 0.1µA battery leakage current in shutdown mode
  • Supports USB On-The-Go (OTG) and SRC mode
    • Reverse mode with 3.84V to 9.6V output
    • Programmable current limit up to 3.2A
  • Supports a wide range of input sources
    • 3.9V to 18V input operating voltage range with 26V absolute max input voltage
    • Supports USB Type-C inputs, USB BC1.2, HVDCP, and Non-Standard Adapters
    • Supports IINDPM Range from 10mA to 3.2A
    • API (Alternate Power from Input) mode for low power input sources down to 10mA
    • VINDPM automatically tracks battery voltage
    • Input Current Optimizer (ICO) maximizes input power without overloading adapters
  • Efficient battery operation with 7mΩ BATFET
  • Narrow VDC (NVDC) power path management
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • Flexible autonomous or I2C-controlled modes
  • Integrated 12-bit ADC for voltage, current, and temperature monitoring
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% charge current regulation
    • ±5% input current regulation
  • Safety
    • Liquid detection and corrosion mitigation (Patent Pending)
    • Thermal regulation and thermal shutdown
    • Input/system/battery overvoltage and overcurrent protection
    • Charging safety timer

The BQ25640 is a highly-integrated 5A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer batteries. The design is highly integrated with built-in current sensing, loop compensation, input reverse-blocking FET (Q1), switching FETs (Q2 and Q3), and battery FET (Q4) between system and battery. The device integrates a USB Type-C controller with Dual-Role Power with Try.SNK and Try.SRC support. The BQ25640 uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes efficiency, reduces battery charging time and extends battery life during discharging phase, and the ultra-low 0.15µA ship mode current extends battery shelf life.

The BQ25640 is a highly-integrated 5A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer batteries. The design is highly integrated with built-in current sensing, loop compensation, input reverse-blocking FET (Q1), switching FETs (Q2 and Q3), and battery FET (Q4) between system and battery. The device integrates a USB Type-C controller with Dual-Role Power with Try.SNK and Try.SRC support. The BQ25640 uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes efficiency, reduces battery charging time and extends battery life during discharging phase, and the ultra-low 0.15µA ship mode current extends battery shelf life.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet BQ25640 I2 C Controlled Single Cell 5A Buck Charger with USB-C Detection datasheet PDF | HTML 2026年 3月 6日
EVM User's guide BQ25640 Evaluation Module PDF | HTML 2026年 3月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (VDL) 23 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片