現在提供此產品的更新版本

open-in-new 比較替代產品
此產品將繼續向現有客戶提供。新設計應考量替代產品。
引腳對引腳且具備與所比較裝置相同的功能
BQ25730 現行 具有電源路徑和 USB-C ® PD OTG 的 I²C 1-5 芯 NVDC 降壓-升壓電池充電控制器 This product is a one-cell to five-cell I2C buck-boost NVDC charge controller with power-path and 400-kHz or 800-kHz programmable switching frequency

產品詳細資料

Number of series cells 1, 2, 3, 4 Charge current (max) (A) 16.2 Vin (max) (V) 26 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH, SuperCap Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Absolute max Vin (max) (V) 32 Control topology Switch-Mode Buck-boost Control interface I2C Features IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Power Path, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.5 Rating Catalog Operating temperature range (°C) -40 to 125
Number of series cells 1, 2, 3, 4 Charge current (max) (A) 16.2 Vin (max) (V) 26 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH, SuperCap Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Absolute max Vin (max) (V) 32 Control topology Switch-Mode Buck-boost Control interface I2C Features IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Power Path, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.5 Rating Catalog Operating temperature range (°C) -40 to 125
WQFN (RSN) 32 16 mm² 4 x 4
  • Pin-to-pin compatible to BQ25713
  • Buck-boost narrow voltage DC (NVDC) charger for USB-C Power Delivery (PD) interface platform
    • 3.5-V to 26-V input range to charge 1- to 4-cell battery
    • Charge current up to 16.2 A/8.1 A with 128-mA/64-mA resolution based on 5-mΩ/10-mΩ sensing resistor
    • Input current limit up to 10 A/6.35 A with 100-mA/50-mA resolution based on 5-mΩ/10-mΩ sensing resistor
    • Support USB 2.0, USB 3.0, USB 3.1 and USB Power Delivery (PD)
    • Input Current Optimizer (ICO) to extract max input power without overloading the adapter
    • Integrated Fast Role Swap (FRS) feature following USB-PD specification
    • Seamless transition between buck, buck-boost, and boost operations
    • Input current and voltage regulation (IINDPM and VINDPM) against source overload
  • TI patented switching frequency dithering pattern for EMI noise reduction
  • TI patented Pass Through Mode (PTM) for system power efficiency improvement and battery fast charging achieving 99% efficiency.
  • IMVP8/IMVP9 compliant system features for Intel platform
    • Enhanced Vmin Active Protection (VAP) mode supplements battery from input capacitors during system peak power spike following latest Intel specification
    • Comprehensive PROCHOT profile
    • Two level discharge current limit PROCHOT profile to avoid battery wire-out
    • System power monitor
  • Input and battery current monitor through dedicated pins
  • Integrated 8-bit ADC to monitor voltage, current and power
  • Battery MOSFET ideal diode operation in supplement mode to support system when adapter is fully loaded
  • Power up USB port from battery (USB OTG)
    • 3-V to 24-V OTG with 8-mV resolution
    • Output current limit up to 12.7 A/6.35 A with 100-mA/50-mA resolution based on 5-mΩ/10-mΩ sensing resistor
  • 800-kHz/1.2-MHz programmable switching frequency with 2.2-µH/1.0-µH inductor
  • I2C host control interface for flexible system configuration
  • High accuracy for the regulation and monitor
    • ±0.5% Charge voltage regulation
    • ±3% Charge current regulation
    • ±2.5% Input current regulation
    • ±2% Input/charge current monitor
  • Safety
    • Thermal shutdown
    • Input, system, battery overvoltage protection
    • Input, MOSFET, inductor overcurrent protection
  • Package: 32-Pin 4.0 mm × 4.0 mm WQFN
  • Pin-to-pin compatible to BQ25713
  • Buck-boost narrow voltage DC (NVDC) charger for USB-C Power Delivery (PD) interface platform
    • 3.5-V to 26-V input range to charge 1- to 4-cell battery
    • Charge current up to 16.2 A/8.1 A with 128-mA/64-mA resolution based on 5-mΩ/10-mΩ sensing resistor
    • Input current limit up to 10 A/6.35 A with 100-mA/50-mA resolution based on 5-mΩ/10-mΩ sensing resistor
    • Support USB 2.0, USB 3.0, USB 3.1 and USB Power Delivery (PD)
    • Input Current Optimizer (ICO) to extract max input power without overloading the adapter
    • Integrated Fast Role Swap (FRS) feature following USB-PD specification
    • Seamless transition between buck, buck-boost, and boost operations
    • Input current and voltage regulation (IINDPM and VINDPM) against source overload
  • TI patented switching frequency dithering pattern for EMI noise reduction
  • TI patented Pass Through Mode (PTM) for system power efficiency improvement and battery fast charging achieving 99% efficiency.
  • IMVP8/IMVP9 compliant system features for Intel platform
    • Enhanced Vmin Active Protection (VAP) mode supplements battery from input capacitors during system peak power spike following latest Intel specification
    • Comprehensive PROCHOT profile
    • Two level discharge current limit PROCHOT profile to avoid battery wire-out
    • System power monitor
  • Input and battery current monitor through dedicated pins
  • Integrated 8-bit ADC to monitor voltage, current and power
  • Battery MOSFET ideal diode operation in supplement mode to support system when adapter is fully loaded
  • Power up USB port from battery (USB OTG)
    • 3-V to 24-V OTG with 8-mV resolution
    • Output current limit up to 12.7 A/6.35 A with 100-mA/50-mA resolution based on 5-mΩ/10-mΩ sensing resistor
  • 800-kHz/1.2-MHz programmable switching frequency with 2.2-µH/1.0-µH inductor
  • I2C host control interface for flexible system configuration
  • High accuracy for the regulation and monitor
    • ±0.5% Charge voltage regulation
    • ±3% Charge current regulation
    • ±2.5% Input current regulation
    • ±2% Input/charge current monitor
  • Safety
    • Thermal shutdown
    • Input, system, battery overvoltage protection
    • Input, MOSFET, inductor overcurrent protection
  • Package: 32-Pin 4.0 mm × 4.0 mm WQFN

The BQ25723 is a synchronous NVDC buck-boost battery charge controller to charge a 1- to 4-cell battery from a wide range of input sources including USB adapter, high voltage USB-C Power Delivery (PD) sources, and traditional adapters.

The NVDC configuration allows the system to be regulated based on battery voltage, but not drop below system minimum voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery goes into supplement mode and prevents the system from crashing.

During power up, the charger sets the converter to a buck, boost, or buck-boost configuration based on the input source and battery conditions. The charger seamlessly transitions between the buck, boost, and buck-boost operation modes without host control.

In the absence of an input source, the BQ25723 supports the USB On-the-Go (OTG) function from a 1- to 4-cell battery to generate an adjustable 3-V to 24-V output on VBUS with 8-mV resolution. The OTG output voltage transition slew rate can be configured to comply with the USB-PD 3.0 PPS specification.

When only a battery powers the system and no external load is connected to the USB OTG port, the BQ25723 implements the latest Intel Vmin Active Protection (VAP) feature, in which the device charges up the VBUS voltage from the battery to store some energy in the input decoupling capacitors. During a system peak power spike, the energy stored in the input capacitors supplements the system, to prevent the system voltage from dropping below the minimum system voltage and causing a system crash.

The BQ25723 monitors adapter current, battery current, and system power. The flexibly programmed PROCHOT output goes directly to the CPU for throttle back when needed.

The latest version of the USB-C PD specification includes Fast Role Swap (FRS) to ensure power role swapping occurs in a timely fashion so that the device(s) connected to the dock can avoid experiencing momentary power loss or glitching. This device integrates FRS in compliance with the PD specification.

TI patented switching frequency dithering pattern can significantly reduce EMI noise over the whole conductive EMI frequency range (150 kHz to 30 MHz). Multiple dithering scale options are available to provide flexibility for different applications to simplify EMI noise filter design.

The charger can be operated in the TI patented Pass Through Mode (PTM) to improve efficiency over the full load range. In PTM, input power is directly passed through the charger to the system. Switching losses of the MOSFETs and inductor core loss can be saved for high efficiency operation.

The BQ25723 is available in a 32-pin 4 mm × 4 mm WQFN package.

The BQ25723 is a synchronous NVDC buck-boost battery charge controller to charge a 1- to 4-cell battery from a wide range of input sources including USB adapter, high voltage USB-C Power Delivery (PD) sources, and traditional adapters.

The NVDC configuration allows the system to be regulated based on battery voltage, but not drop below system minimum voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery goes into supplement mode and prevents the system from crashing.

During power up, the charger sets the converter to a buck, boost, or buck-boost configuration based on the input source and battery conditions. The charger seamlessly transitions between the buck, boost, and buck-boost operation modes without host control.

In the absence of an input source, the BQ25723 supports the USB On-the-Go (OTG) function from a 1- to 4-cell battery to generate an adjustable 3-V to 24-V output on VBUS with 8-mV resolution. The OTG output voltage transition slew rate can be configured to comply with the USB-PD 3.0 PPS specification.

When only a battery powers the system and no external load is connected to the USB OTG port, the BQ25723 implements the latest Intel Vmin Active Protection (VAP) feature, in which the device charges up the VBUS voltage from the battery to store some energy in the input decoupling capacitors. During a system peak power spike, the energy stored in the input capacitors supplements the system, to prevent the system voltage from dropping below the minimum system voltage and causing a system crash.

The BQ25723 monitors adapter current, battery current, and system power. The flexibly programmed PROCHOT output goes directly to the CPU for throttle back when needed.

The latest version of the USB-C PD specification includes Fast Role Swap (FRS) to ensure power role swapping occurs in a timely fashion so that the device(s) connected to the dock can avoid experiencing momentary power loss or glitching. This device integrates FRS in compliance with the PD specification.

TI patented switching frequency dithering pattern can significantly reduce EMI noise over the whole conductive EMI frequency range (150 kHz to 30 MHz). Multiple dithering scale options are available to provide flexibility for different applications to simplify EMI noise filter design.

The charger can be operated in the TI patented Pass Through Mode (PTM) to improve efficiency over the full load range. In PTM, input power is directly passed through the charger to the system. Switching losses of the MOSFETs and inductor core loss can be saved for high efficiency operation.

The BQ25723 is available in a 32-pin 4 mm × 4 mm WQFN package.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet BQ25723 I2C 1- to 4-Cell Narrow VDC Buck-Boost Battery Charge Controller With System Power Monitor and Processor Hot Monitor datasheet PDF | HTML 2021年 5月 25日
Application note Layout Guide for Buck-Boost Charger BQ257XX Series PDF | HTML 2024年 1月 30日
Certificate BQ25723EVM EU Declaration of Conformity (DoC) 2021年 5月 31日
User guide BQ25720, BQ25723 Evaluation Module PDF | HTML 2021年 5月 19日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25723EVM — BQ25723 評估模組,I²C、1 至 4 芯、8-A、NVDC 降壓-升壓電池充電控制器

BQ25723EVM 評估模組 (EVM) 是一款具有 N 通道 MOSFET 選擇器和電流監控功能的 I2C 控制窄電壓 DC (NVDC) 降壓升壓充電控制器。降壓轉換器的輸入電壓範圍介於 3.5 V 和 26 V 之間,具有 1 至 4 芯電池的可編程輸出,以及 64 mA 至 8 A 充電輸出電流範圍。此 EVM 不包含 EV2400 介面裝置;必須單獨訂購才能評估 BQ25723EVM。
使用指南: PDF | HTML
TI.com 無法提供
應用軟體及架構

BQSTUDIO-STABLE Battery Management Studio (bqStudio) Software – stable version downloads for bq series of TI battery fuel gauges

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
BQ76942 3 串聯至 10 串聯多芯電池監控器和保護器 BQ76952 適用於鋰離子、鋰聚合物和 LiFePO4 的 3-s 至 16-s 高準確度電池監控器和保護器
電池充電器 IC
BQ24800 支援混合動力升壓和電池升壓模式的 SMBus 1 至 4 節降壓電池充電控制器 BQ25720 具有電源路徑和 USB-C ® PD OTG 的 SMBus 1- 至 4- 芯 NVDC 降壓-升壓電池充電控制器 BQ25723 具有電源路徑和 USB-C ® PD OTG 的 I²C 1-4 芯 NVDC 降壓-升壓電池充電控制器 BQ25731 具有 USB type-C PD 支援的 I2C 1-5 芯 NVDC 升壓-降壓電池充電控制器 BQ25790 整合式 NVDC 5-A 1 至 4 芯切換模式降壓/升壓電池充電器 BQ25792 具有雙輸入選擇器與 USB PD 3.0 OTG 輸出的 I2C 控制、5A、1-4 芯降壓-升壓充電器
電池電量指示
BQ27220 具預編程化學設定檔的單芯電池組/系統端 CEDV 電池電量 (氣量) 計 BQ27320 單芯電池組/系統側 CEDV 電池電量 (氣量) 計 BQ27425-G1 具直接電池連線的 System-side Impedance Track™; 電量計 | 電池電量計 BQ27425-G2A LiCoO2 電池系統側 Impedance Track™; 電量計 BQ27425-G2B 系統側 Impedance Track™; 電量計 LiMn2O4 電池 BQ27520-G4 具整合式 LDO 的系統側 Impedance Track™ 電量計。 BQ27530-G1 具直接電池連線的 System-side Impedance Track 電量 (氣量) 計 BQ27531-G1 適用 bq2419x 充電器控制器的電池管理單元 Impedance Track™ 電量 (氣量) 計 BQ27532-G1 適用於 bq2425x 充電器的電池管理裝置 Impedance Track™ 電量計 BQ27545-G1 單芯封裝側電量計 Impedance Track™ 電量計 BQ27546-G1 採用 DSBGA 封裝的單芯 Impedance Track™ 封裝側電量計 BQ27621-G1 具動態電壓關聯的系統側電池電量計,電池電量計 BQ27741-G1 含整合式保護器的電池組側 Impedance Track™(tm) 電量 (氣量) 計 BQ27742-G1 具整合式保護的單芯鋰離子電池電量計 | 電池氣量計 BQ27Z561 適用於 1 串聯的 Impedance Track™ 積體電路氣量計解決方案 BQ28Z610 具整合保護器且適用 1-2 系列電池組的電池電量計 BQ34110 具有整合式極少放電模組的多化學高芯數電池電量表 BQ34210-Q1 符合車用資格的單芯系統側 CEDV 電量計 BQ34Z100-G1 多化學 Impedance Track™ 獨立電池電量計 | 電池氣量計 BQ35100 非充電式電池 (鋰主電池) 和服務結束監視器的電池電量表 BQ4050 1-4 系列 CEDV 電池電量 (氣量) 計 BQ40Z50 1-4 系列鋰離子電池組管理器 | 電池燃料電量 (氣量) 計 BQ40Z50-R1 支援 Turbo 模式 1.0 的 1-4 系列鋰電池組管理器 BQ40Z50-R2 支援 Turbo 模式 2.0 的 1-4 系列鋰離子電池組管理器 BQ40Z60 完整多芯電池管理器 | 電池電量 (氣量) 計 BQ40Z80 具有 Impedance Track™ 氣量計量的 2-s 至 6-s 電池組管理器 BQ78350 適用 bq76940 監視器系列的配套 CEDV 電量計電池管理控制器 BQ78350-R1 CEDV 鋰離子電量計和電池管理控制器 BQ78Z100 適用於 1 串聯至 2 串聯的 Impedance Track™ 電池電量 (氣量) 計
下載選項
應用軟體及架構

BQSTUDIO-TEST Battery Management Studio (bqStudio) Software – Beta version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

支援產品和硬體

支援產品和硬體

產品
Battery monitors & balancers
BQ76905 具有高準確度電池電壓量測且適用於 2S 到 5S 的低功率監控器和保護器 BQ76907 具有高準確度電池電壓量測且適用於 2S 到 7S 的低功率監控器和保護器 BQ769142 適用於鋰離子、鋰聚合物和 LiFePO4 電池的 3-s 至 14-s 高準確度電池監測器和保護器 BQ76942 3 串聯至 10 串聯多芯電池監控器和保護器 BQ76952 適用於鋰離子、鋰聚合物和 LiFePO4 的 3-s 至 16-s 高準確度電池監控器和保護器 BQ76972 適用於鋰離子、鋰聚合物和磷酸鐵鋰的 3s 至 16s 高準確度電池監控器和保護器
Battery charger ICs
BQ24800 支援混合動力升壓和電池升壓模式的 SMBus 1 至 4 節降壓電池充電控制器 BQ25720 具有電源路徑和 USB-C ® PD OTG 的 SMBus 1- 至 4- 芯 NVDC 降壓-升壓電池充電控制器 BQ25723 具有電源路徑和 USB-C ® PD OTG 的 I²C 1-4 芯 NVDC 降壓-升壓電池充電控制器 BQ25731 具有 USB type-C PD 支援的 I2C 1-5 芯 NVDC 升壓-降壓電池充電控制器 BQ25756 具有 MPPT 之獨立式或 I²C 控制的 70-V 雙向降壓升壓充電控制器 BQ25790 整合式 NVDC 5-A 1 至 4 芯切換模式降壓/升壓電池充電器 BQ25792 具有雙輸入選擇器與 USB PD 3.0 OTG 輸出的 I2C 控制、5A、1-4 芯降壓-升壓充電器
Battery fuel gauges
BQ27220 具預編程化學設定檔的單芯電池組/系統端 CEDV 電池電量 (氣量) 計 BQ27320 單芯電池組/系統側 CEDV 電池電量 (氣量) 計 BQ27425-G1 具直接電池連線的 System-side Impedance Track™; 電量計 | 電池電量計 BQ27425-G2A LiCoO2 電池系統側 Impedance Track™; 電量計 BQ27425-G2B 系統側 Impedance Track™; 電量計 LiMn2O4 電池 BQ27427 具有預編程化學及整合式感測電阻器的單芯電池電量計 BQ27520-G4 具整合式 LDO 的系統側 Impedance Track™ 電量計。 BQ27530-G1 具直接電池連線的 System-side Impedance Track 電量 (氣量) 計 BQ27531-G1 適用 bq2419x 充電器控制器的電池管理單元 Impedance Track™ 電量 (氣量) 計 BQ27532-G1 適用於 bq2425x 充電器的電池管理裝置 Impedance Track™ 電量計 BQ27545-G1 單芯封裝側電量計 Impedance Track™ 電量計 BQ27546-G1 採用 DSBGA 封裝的單芯 Impedance Track™ 封裝側電量計 BQ27621-G1 具動態電壓關聯的系統側電池電量計,電池電量計 BQ27741-G1 含整合式保護器的電池組側 Impedance Track™(tm) 電量 (氣量) 計 BQ27742-G1 具整合式保護的單芯鋰離子電池電量計 | 電池氣量計 BQ27Z561 適用於 1 串聯的 Impedance Track™ 積體電路氣量計解決方案 BQ27Z746 具有整合式保護器的電池組側、單芯 Impedance Track™ 技術電量計 BQ28Z610 具整合保護器且適用 1-2 系列電池組的電池電量計 BQ34110 具有整合式極少放電模組的多化學高芯數電池電量表 BQ34210-Q1 符合車用資格的單芯系統側 CEDV 電量計 BQ34Z100-G1 多化學 Impedance Track™ 獨立電池電量計 | 電池氣量計 BQ35100 非充電式電池 (鋰主電池) 和服務結束監視器的電池電量表 BQ4050 1-4 系列 CEDV 電池電量 (氣量) 計 BQ40Z50 1-4 系列鋰離子電池組管理器 | 電池燃料電量 (氣量) 計 BQ40Z50-R1 支援 Turbo 模式 1.0 的 1-4 系列鋰電池組管理器 BQ40Z50-R2 支援 Turbo 模式 2.0 的 1-4 系列鋰離子電池組管理器 BQ40Z60 完整多芯電池管理器 | 電池電量 (氣量) 計 BQ40Z80 具有 Impedance Track™ 氣量計量的 2-s 至 6-s 電池組管理器 BQ78350 適用 bq76940 監視器系列的配套 CEDV 電量計電池管理控制器 BQ78350-R1 CEDV 鋰離子電量計和電池管理控制器 BQ78Z100 適用於 1 串聯至 2 串聯的 Impedance Track™ 電池電量 (氣量) 計
電池保護器
BQ77307 具有高準確度電池電壓量測且適用於 2S 到 7S 的低功耗監控器
硬體開發
開發板
MKST-3P-ALT-EV2300 適用 EV2300 通訊收發器的 MKS 技術替代方案
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RSN) 32 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片