首頁 電池管理 IC 電池保護器
首頁
電池管理 IC
電池保護器

BQ29209-Q1

現行

適用於 2 芯鋰離子電池且具有自動電池芯平衡功能的汽車電壓保護，OVP=4.30V

立即訂購
產品規格表

BQ29209-Q1

現行
產品規格表 立即訂購

產品詳細資料

Function Protection Number of series cells (min) 2 Number of series cells (max) 2 Features Cell balancing, External delay capacitor, Overvoltage, Single pin output drive Operating current (typ) (µA) 3 Rating Automotive Vin (max) (V) 16 TI functional safety category Functional Safety-Capable Overvoltage protection 4.3 Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 4.3 Battery overvoltage protection (max) (V) 4.3
Function Protection Number of series cells (min) 2 Number of series cells (max) 2 Features Cell balancing, External delay capacitor, Overvoltage, Single pin output drive Operating current (typ) (µA) 3 Rating Automotive Vin (max) (V) 16 TI functional safety category Functional Safety-Capable Overvoltage protection 4.3 Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 4.3 Battery overvoltage protection (max) (V) 4.3
VSON (DRB) 8 9 mm² 3 x 3
  • 2-series cell secondary protection
  • Automatic cell imbalance correction with external enable control
    • ±30-mV enable, 0-mV disable thresholds typical
  • External capacitor-controlled delay timer
  • External resistor-controlled cell balance current
  • Low power consumption ICC < 3 µA typical (VCELL(ALL) < VPROTECT)
  • Internal cell balancing handles current up to 15 mA
  • External cell balancing mode supported
  • High-accuracy overvoltage protection:
    • ±25 mV with TA = 0°C to 60°C
  • Fixed overvoltage protection threshold: 4.30 V
  • Small 8L DRB package
  • Functional Safety-Capable
  • Automotive-qualified AEC Q100 grade two
  • 2-series cell secondary protection
  • Automatic cell imbalance correction with external enable control
    • ±30-mV enable, 0-mV disable thresholds typical
  • External capacitor-controlled delay timer
  • External resistor-controlled cell balance current
  • Low power consumption ICC < 3 µA typical (VCELL(ALL) < VPROTECT)
  • Internal cell balancing handles current up to 15 mA
  • External cell balancing mode supported
  • High-accuracy overvoltage protection:
    • ±25 mV with TA = 0°C to 60°C
  • Fixed overvoltage protection threshold: 4.30 V
  • Small 8L DRB package
  • Functional Safety-Capable
  • Automotive-qualified AEC Q100 grade two

The BQ29209-Q1 device is a secondary overvoltage protection IC for 2-series cell lithium-ion battery packs that incorporates a high-accuracy precision overvoltage detection circuit and automatic cell imbalance correction.

The voltage of each cell in a 2-series cell battery pack is compared to a factory programmed internal reference voltage. If either cell reaches an overvoltage condition, the OUT pin changes from low to high state.

The BQ29209-Q1 can perform automatic voltage-based cell imbalance correction. Balancing can start when the cell voltages are different by nominally 30 mV or more and stops when the difference is nominally 0 mV. Cell balancing is enabled and disabled by the CB_EN pin.

The BQ29209-Q1 device is a secondary overvoltage protection IC for 2-series cell lithium-ion battery packs that incorporates a high-accuracy precision overvoltage detection circuit and automatic cell imbalance correction.

The voltage of each cell in a 2-series cell battery pack is compared to a factory programmed internal reference voltage. If either cell reaches an overvoltage condition, the OUT pin changes from low to high state.

The BQ29209-Q1 can perform automatic voltage-based cell imbalance correction. Balancing can start when the cell voltages are different by nominally 30 mV or more and stops when the difference is nominally 0 mV. Cell balancing is enabled and disabled by the CB_EN pin.
filter 尋找其它 電池保護器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet BQ29209-Q1 Voltage Protection with Automatic Cell Balance for 2-Series Cell Li-I datasheet (Rev. D) 2020年 9月 30日
Functional safety information BQ29209-Q1 Functional Safety FIT Rate, FMD, and Pin FMA 2020年 8月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSON (DRB) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片