首頁 電池管理 IC 電池監控器和平衡器
首頁
電池管理 IC
電池監控器和平衡器

BQ756506-Q1

現行
立即訂購
產品規格表

BQ756506-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Number of series cells (max) 6 Number of series cells (min) 4 Features Cell balancing, Integrated ADC, Multi-cell support, One-time-programmable (OTP) memory, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 32 Communication interface UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 4.5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 9000
Rating Automotive Number of series cells (max) 6 Number of series cells (min) 4 Features Cell balancing, Integrated ADC, Multi-cell support, One-time-programmable (OTP) memory, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 32 Communication interface UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 2.7 Battery overvoltage protection (max) (V) 4.5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 9000
HTQFP (PAP) 64 144 mm² (12 mm × 12 mm)
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant
  • ±1.5-mV ADC accuracy
  • Pin-package and software compatible device family:
    • Stackable monitor 16S (BQ79616-Q1, BQ79656-Q1), 14S (BQ79614-Q1, BQ79654-Q1), and 12S (BQ79612-Q1, BQ79652-Q1)
    • Standalone monitor 48-V system (BQ75614-Q1)
  • Supports current-sense measurement
  • Supports fuse and relay open and close diagnostics
  • Built-in redundancy path for voltage and temperature and current diagnostics
  • Highly accurate cell voltage measurements within 128 µs for all cell channels
  • Integrated post-ADC configurable digital low-pass filters
  • Built-in host-controlled hardware reset to emulate POR-like device reset
  • Supports internal cell balancing
    • Balancing current at 240 mA
    • Built-in balancing thermal management with automatic pause and resume control
  • 5-V LDO output to power external digital isolator
  • UART host interface
  • Built-in SPI controller
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant
  • ±1.5-mV ADC accuracy
  • Pin-package and software compatible device family:
    • Stackable monitor 16S (BQ79616-Q1, BQ79656-Q1), 14S (BQ79614-Q1, BQ79654-Q1), and 12S (BQ79612-Q1, BQ79652-Q1)
    • Standalone monitor 48-V system (BQ75614-Q1)
  • Supports current-sense measurement
  • Supports fuse and relay open and close diagnostics
  • Built-in redundancy path for voltage and temperature and current diagnostics
  • Highly accurate cell voltage measurements within 128 µs for all cell channels
  • Integrated post-ADC configurable digital low-pass filters
  • Built-in host-controlled hardware reset to emulate POR-like device reset
  • Supports internal cell balancing
    • Balancing current at 240 mA
    • Built-in balancing thermal management with automatic pause and resume control
  • 5-V LDO output to power external digital isolator
  • UART host interface
  • Built-in SPI controller

The BQ756506-Q1 device provides high-accuracy cell voltage measurements up to 6S battery modules in less than 200 µs while this device also supports shunt-resistor current sense measurement. The integrated front-end filters enable the system to implement with simple, low voltage rated, differential RC filters on the cell input channels. The integrated, post-ADC, low-pass filters enable filtered, DC-like, voltage measurements. This device also supports integrated current sensing capabilities with an option to synchronize with cell voltage measurements for better state of charge (SOC) calculation. The device supports autonomous internal cell balancing with temperature monitoring to auto-pause and resume balancing to avoid an overtemperature condition.

This device also includes eight GPIOs or auxiliary inputs that can be used for external thermistor measurements.

Host communication to the BQ756506-Q1 can be connected via the device’s dedicated UART interface.

The BQ756506-Q1 device provides high-accuracy cell voltage measurements up to 6S battery modules in less than 200 µs while this device also supports shunt-resistor current sense measurement. The integrated front-end filters enable the system to implement with simple, low voltage rated, differential RC filters on the cell input channels. The integrated, post-ADC, low-pass filters enable filtered, DC-like, voltage measurements. This device also supports integrated current sensing capabilities with an option to synchronize with cell voltage measurements for better state of charge (SOC) calculation. The device supports autonomous internal cell balancing with temperature monitoring to auto-pause and resume balancing to avoid an overtemperature condition.

This device also includes eight GPIOs or auxiliary inputs that can be used for external thermistor measurements.

Host communication to the BQ756506-Q1 can be connected via the device’s dedicated UART interface.
filter 尋找其它 電池監控器和平衡器
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供完整的產品規格表。立即索取

提供功能安全手冊。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
BQ75614-Q1 現行 符合 ASIL-D 規範的車用 16-S 精密電池監控器、平衡器和整合式保護器 Supports up to 14 cells.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 BQ756506-Q1 4S or 6S Standalone Precision Automotive Battery Monitor, Balancer, and Integrated Current Sense datasheet (Rev. B) PDF | HTML 2023/10/31
使用指南 BQ79616-Q1 and BQ75614-Q1 Graphical User Interface (GUI) User's Guide 2020/12/14

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片