首頁 電池管理 IC 電池監控器和平衡器
首頁
電池管理 IC
電池監控器和平衡器
最新

BQ76972

現行

適用於鋰離子、鋰聚合物和磷酸鐵鋰的 3s 至 16s 高準確度電池監控器和保護器

立即訂購
產品規格表

BQ76972

現行
產品規格表 立即訂購

產品詳細資料

Number of series cells (min) 3 Vin (max) (V) 80 Features Autonomous Mode, Coulomb Counter, Digital output, High-side FET drive, I2C support, LDO output, Low-Power Sleep Mode, Multi-cell support, One-Time Programmable (OTP) memory, Open wire (OW), Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Power-save mode, Scratchpad memory, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection Device type Cell monitor and balancer, Protector Number of series cells (max) 16 Operating temperature range (°C) -40 to 85 Rating Catalog Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566 Communication interface HDQ, I2C, SPI
Number of series cells (min) 3 Vin (max) (V) 80 Features Autonomous Mode, Coulomb Counter, Digital output, High-side FET drive, I2C support, LDO output, Low-Power Sleep Mode, Multi-cell support, One-Time Programmable (OTP) memory, Open wire (OW), Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Power-save mode, Scratchpad memory, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection Device type Cell monitor and balancer, Protector Number of series cells (max) 16 Operating temperature range (°C) -40 to 85 Rating Catalog Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566 Communication interface HDQ, I2C, SPI
TQFP (PFB) 48 81 mm² 9 x 9
  • Battery monitoring capability for 3-series to 16-series cells
  • High accuracy cell voltage measurement of ±3.0 mV
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
  • Wide-range current applications (±200-mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286 µA
    • Multiple SLEEP mode options: 24 µA to 41 µA
    • Multiple DEEPSLEEP mode options: 9 µA to 10 µA
    • SHUTDOWN mode: 1 µA
  • High-voltage tolerance of 85 V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400-kHz I 2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)
  • Battery monitoring capability for 3-series to 16-series cells
  • High accuracy cell voltage measurement of ±3.0 mV
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
  • Wide-range current applications (±200-mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286 µA
    • Multiple SLEEP mode options: 24 µA to 41 µA
    • Multiple DEEPSLEEP mode options: 9 µA to 10 µA
    • SHUTDOWN mode: 1 µA
  • High-voltage tolerance of 85 V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400-kHz I 2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)

The Texas Instruments BQ76972 device is a highly integrated, high-accuracy battery monitor and protector for 3-series to 16-series Li-ion, Li-polymer, and LiFePO 4 battery packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400-kHz I 2C, SPI, and HDQ one-wire standards. The BQ76972 device is available in a 48-pin TQFP package.

The Texas Instruments BQ76972 device is a highly integrated, high-accuracy battery monitor and protector for 3-series to 16-series Li-ion, Li-polymer, and LiFePO 4 battery packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400-kHz I 2C, SPI, and HDQ one-wire standards. The BQ76972 device is available in a 48-pin TQFP package.
open-in-new 尋找其它 電池監控器和平衡器
下載 觀看有字幕稿的影片 影片
Request more information

Functional safety information such as failure modes, effects and diagnostic analysis (FMEDA), safety analysis reports and safety manuals are available under NDA. Request now

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet BQ76972 3-Series to 16-Series High Accuracy Battery Monitor and Protector for Li-Ion, Li-Polymer, and LiFePO4Battery Packs datasheet PDF | HTML 2023年 11月 23日
Application brief Scaling accurate battery management designs across energy storage systems PDF | HTML 2023年 10月 20日
User guide BQ76972 Technical Reference Manual PDF | HTML 2023年 6月 26日
Application note Design Considerations of Stacked BQ769x2 With High-Side N-MOSFET PDF | HTML 2023年 2月 9日
Technical article Pack a punch in battery pack systems with low-cost MCUs PDF | HTML 2021年 11月 16日
Application note Pin Equivalent Diagrams for the BQ76952, BQ76942, and BQ769142 2021年 5月 6日
Application note BQ76952 High Voltage Stress Report PDF | HTML 2021年 2月 25日
Technical article How to stack battery monitors for high-cell-count industrial applications PDF | HTML 2021年 2月 11日
Application note BQ76942 IEC ESD 61000-4-2 ESD Test Report 2020年 11月 16日
Technical article CURRENTly questioning the accuracy of your battery monitor? Improve battery safety PDF | HTML 2020年 5月 28日
Technical article Improving voltage measurement accuracy in battery monitoring systems PDF | HTML 2020年 4月 1日
Technical article Improving temperature measurement accuracy in battery monitoring systems PDF | HTML 2020年 2月 20日
Application note Parallel Paths with the BQ769x2 Battery Monitor 2020年 1月 9日
Technical article Next-generation battery monitors: how to improve battery safety while improving ac PDF | HTML 2020年 1月 6日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

應用軟體及架構

BQ769X2-THERMISTOR-COEFF-CALCULATOR — BQ76952/42 thermistor temperature optimizer - calculate the thermistors coefficients for T range

The BQ769x2 family of battery monitors can support multiple external thermistors. The device includes an internal pullup resistor to bias the thermistor during measurement. The internal pullup resistor has two options which can set the pullup to 18 kΩ or 180 kΩ. The 18-kΩ option (...)
使用指南: PDF | HTML
檢視選項
應用軟體及架構

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

lock = 需要匯出核准 (1 分鐘)
支援產品和硬體

支援產品和硬體

產品
Battery monitors & balancers
BQ76905 — 具有高準確度電池電壓量測且適用於 2S 到 5S 的低功耗監控器和保護器 BQ76907 — 具有高準確度電池電壓量測且適用於 2S 到 7S 的低功耗監控器和保護器 BQ769142 — 適用於鋰離子、鋰聚合物和 LiFePO4 電池的 3-s 至 14-s 高準確度電池監測器和保護器 BQ76942 — 3 串聯至 10 串聯多芯電池監控器和保護器 BQ76952 — 適用於鋰離子、鋰聚合物和磷酸鐵鋰的 3-s 至 16-s 高準確度電池監控器和保護器 BQ76972 — 適用於鋰離子、鋰聚合物和磷酸鐵鋰的 3s 至 16s 高準確度電池監控器和保護器
Battery charger ICs
BQ24800 — 支援混合動力升壓和電池升壓模式的 SMBus 1 至 4 節降壓電池充電控制器 BQ25720 — 具有電源路徑和 USB-C ® PD OTG 的 SMBus 1- 至 4- 芯 NVDC 降壓-升壓電池充電控制器 BQ25723 — 具有電源路徑和 USB-C ® PD OTG 的 I²C 1-4 芯 NVDC 降壓-升壓電池充電控制器 BQ25731 — 具有 USB type-C PD 支援的 I2C 1-5 芯 NVDC 升壓-降壓電池充電控制器 BQ25756 — 具有 MPPT 之獨立式或 I²C 控制的 70-V 雙向降壓升壓充電控制器 BQ25790 — 整合式 NVDC 5-A 1 至 4 芯切換模式降壓/升壓電池充電器 BQ25792 — 具備雙輸入選擇器與 USB PD 3.0 OTG 輸出的 I2C 控制、5-A、1-4 芯降壓-升壓充電器
Battery fuel gauges
BQ27220 — 具預編程化學設定檔的單芯電池組/系統端 CEDV 電池電量 (氣量) 計 BQ27320 — 單芯電池組/系統側 CEDV 電池電量 (氣量) 計 BQ27425-G1 — 具直接電池連線的 System-side Impedance Track™; 電量計 | 電池電量計 BQ27425-G2A — LiCoO2 電池系統側 Impedance Track™; 電量計 BQ27425-G2B — 系統側 Impedance Track™; 電量計 LiMn2O4 電池 BQ27427 — 具有預編程化學及整合式感測電阻器的單芯電池電量計 BQ27520-G4 — 具整合式 LDO 的系統側 Impedance Track™ 電量計。 BQ27530-G1 — 具直接電池連線的 System-side Impedance Track 電量 (氣量) 計 BQ27531-G1 — 適用 bq2419x 充電器控制器的電池管理單元 Impedance Track™ 電量 (氣量) 計 BQ27532-G1 — 適用於 bq2425x 充電器的電池管理裝置 Impedance Track™ 電量計 BQ27545-G1 — 單芯封裝側電量計 Impedance Track™ 電量計 BQ27546-G1 — 採用 DSBGA 封裝的單芯 Impedance Track™ 封裝側電量計 BQ27621-G1 — 具動態電壓關聯的系統側電池電量計，電池電量計 BQ27741-G1 — 含整合式保護器的電池組側 Impedance Track™(tm) 電量 (氣量) 計 BQ27742-G1 — 具整合式保護的單芯鋰離子電池電量計 | 電池氣量計 BQ27Z561 — 適用於 1 串聯的 Impedance Track™ 積體電路氣量計解決方案 BQ27Z746 — 具有整合式保護器的電池組側、單芯 Impedance Track™ 技術電量計 BQ28Z610 — 具整合保護器且適用 1-2 系列電池組的電池電量計 BQ34110 — 具有整合式極少放電模組的多化學高芯數電池電量表 BQ34210-Q1 — 符合車用資格的單芯系統側 CEDV 電量計 BQ34Z100-G1 — 多化學 Impedance Track™ 獨立電池電量計 | 電池氣量計 BQ35100 — 非充電式電池 (鋰主電池) 和服務結束監視器的電池電量表 BQ4050 — 1-4 系列 CEDV 電池電量 (氣量) 計 BQ40Z50 — 1-4 系列鋰離子電池組管理器 | 電池燃料電量 (氣量) 計 BQ40Z50-R1 — 支援 Turbo 模式 1.0 的 1-4 系列鋰電池組管理器 BQ40Z50-R2 — 支援 Turbo 模式 2.0 的 1-4 系列鋰離子電池組管理器 BQ40Z60 — 完整多芯電池管理器 | 電池電量 (氣量) 計 BQ40Z80 — 具有 Impedance Track™ 氣量計量的 2-s 至 6-s 電池組管理器 BQ78350 — 適用 bq76940 監視器系列的配套 CEDV 電量計電池管理控制器 BQ78350-R1 — CEDV 鋰離子電量計和電池管理控制器 BQ78Z100 — 適用於 1 串聯至 2 串聯的 Impedance Track™ 電池電量 (氣量) 計
電池保護器
BQ77307 — 具有高準確度電池電壓量測且適用於 2S 到 7S 的低功耗監控器
硬體開發
開發板
MKST-3P-ALT-EV2300 — 適用 EV2300 通訊收發器的 MKS 技術替代方案
下載選項
封裝 引腳 下載
TQFP (PFB) 48 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片