首頁 電池管理 IC 電池監控器和平衡器
首頁
電池管理 IC
電池監控器和平衡器
最新

BQ76972-Q1

現行

適用於鋰離子、鋰聚合物和 LiFePO4 的汽車 3 至 16 秒高準確度電池監控器和保護器

立即訂購
產品規格表

BQ76972-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Number of series cells (max) 16 Number of series cells (min) 3 Features Autonomous Mode, Coulomb Counter, Digital output, High-side FET drive, I2C support, LDO output, Low-Power Sleep Mode, Multi-cell support, One-Time Programmable (OTP) memory, Open wire (OW), Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Power-save mode, Scratchpad memory, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface HDQ, I2C, SPI Device type Cell monitor and balancer, Protector Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566
Rating Automotive Number of series cells (max) 16 Number of series cells (min) 3 Features Autonomous Mode, Coulomb Counter, Digital output, High-side FET drive, I2C support, LDO output, Low-Power Sleep Mode, Multi-cell support, One-Time Programmable (OTP) memory, Open wire (OW), Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Power-save mode, Scratchpad memory, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface HDQ, I2C, SPI Device type Cell monitor and balancer, Protector Operating temperature range (°C) -40 to 125 Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566
TQFP (PFB) 48 81 mm² 9 x 9
  • AEC-Q100 Qualified for automotive applications
  • Battery and supercap monitoring capability for 3-series to 16-series cells
  • High accuracy cell voltage measurement of ±3.0mV
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with low input offset error
  • Wide-range current applications (±200mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286µA
    • Multiple SLEEP mode options: 24µA to 41µA
    • Multiple DEEPSLEEP mode options: 9µA to 10µA
    • SHUTDOWN mode: 1µA
  • High-voltage tolerance of 85V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400kHz I2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)
  • AEC-Q100 Qualified for automotive applications
  • Battery and supercap monitoring capability for 3-series to 16-series cells
  • High accuracy cell voltage measurement of ±3.0mV
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with low input offset error
  • Wide-range current applications (±200mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286µA
    • Multiple SLEEP mode options: 24µA to 41µA
    • Multiple DEEPSLEEP mode options: 9µA to 10µA
    • SHUTDOWN mode: 1µA
  • High-voltage tolerance of 85V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400kHz I2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)

The Texas Instruments BQ76972-Q1 device is a highly integrated, high-accuracy automotive battery monitor and protector for 3-series to 16-series Li-ion, Li-polymer, LiFePO4 battery and supercap packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400kHz I2C, SPI, and HDQ one-wire standards. The BQ76972-Q1 device is available in a 48-pin TQFP package.

The Texas Instruments BQ76972-Q1 device is a highly integrated, high-accuracy automotive battery monitor and protector for 3-series to 16-series Li-ion, Li-polymer, LiFePO4 battery and supercap packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400kHz I2C, SPI, and HDQ one-wire standards. The BQ76972-Q1 device is available in a 48-pin TQFP package.
filter 尋找其它 電池監控器和平衡器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet BQ76972-Q1 3-Series to 16-Series High Accuracy Automotive Battery Monitor and Protector for Li-Ion and LiFePO4 Battery and Supercap Packs datasheet PDF | HTML 2026年 5月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ76952EVM — 3-s 至 16-s 鋰離子、鋰聚合物和 LiFePO4 電池監測器和保護器評估模組

BQ76952EVM 評估模組 (EVM) 是一套適用於 BQ76952 (3 芯至 16 芯鋰離子電池監控積體電路) 的完整評估系統。EVM 包含 BQ76952 電路模組，於簡易評估 BQ76952 監控功能。該電路模組包括一個 BQ76952 積體電路 (IC)、感測電阻器、熱敏電阻、功率 FET，還包括防止 16 串聯電池芯鋰離子或鋰聚合物電池組中出現電池過充、過放電、短路和過電流放電、溫度過高和過低所需的其它所有板載元件。電路模組直接連接電池中的電池芯，或可與電源供應器和隨附的電池芯模擬器電阻器連接。藉助板載介面或相容的外部介面電路板和 Microsoft® Windows® PC (...)

使用指南: PDF
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TQFP (PFB) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片