CC1020
- True Single Chip UHF RF Transceiver
- Frequency Range 402 MHz to 470 MHz
and 804 MHz to 930 MHz - High Sensitivity
- Up to –118 dBm for a 12.5 kHz Channel
- Programmable Output Power
- Low
Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- 2.3 V to 3.6 V
- No External IF Filter Needed
- Low-IF Receiver
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency and AFC Make Crystal Temperature Drift Compensation Possible Without TCXO
- Suitable for Frequency Hopping Systems
- Suited for
Systems Targeting Compliance With
EN 300 220, FCC CFR47 Part 15, and
ARIB STD-T67 - Easy-to-Use Software for Generating the CC1020 Configuration Data
The CC1020 device is a true single-chip UHF transceiver designed for very low-power and very low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1020 device is especially suited for narrow-band systems with channel spacing of 12.5 or 25 kHz complying with ARIB STD-T67 and EN 300 220.
The main operating parameters of the CC1020 device can be programmed with a serial bus, thus making the CC1020 device a very flexible and easy-to-use transceiver.
In a typical system, the CC1020 device will be used together with a microcontroller and a few external passive components.
TI recommends using the latest RF performance line device CC1120 as successor of the CC1020 device: www.ti.com/rfperformanceline.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | CC1020 Low-Power RF Transceiver for Narrowband Systems datasheet (Rev. I) | PDF | HTML | 2018/8/22 | ||
| * | 勘誤表 | CC1020 Errata Notes | 2006/1/31 | |||
| * | 輻射及可靠性報告 | CC1020 Reliability Report | 2006/4/28 | |||
| 應用說明 | DN035 -- Antenna Quick Guide (Rev. B) | 2022/2/9 | ||||
| 應用說明 | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 2013/2/22 | ||||
| 應用說明 | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012/8/2 | ||||
| 應用說明 | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 2011/8/30 | ||||
| 應用說明 | AN058 -- Antenna Selection Guide (Rev. B) | 2010/10/6 | ||||
| 應用說明 | DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary | 2010/8/26 | ||||
| 更多文件說明 | CC1020 Material content | 2007/7/16 | ||||
| 更多文件說明 | CC1020 RoHS Confirmation | 2006/1/31 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
BOOSTXL-CC1120-90 — 適用於 902 MHz 至 928 MHz 應用的 BoosterPack
CC1120-CC1190 BoosterPack™ 模組專為搭配 MSP-EXP430F5529 及 MSP-EXP430G2553 LauchPad™ 開發套件使用而設計，並可透過 SmartRF Studio 應用軟體做為獨立模組使用。 此模組配備整合式 PCB 追蹤天線，可於美國 902~928MHz 和歐洲 869~870MHz ISM 頻帶運作。
RDCR-3P-RADIO-MOD — Radiocrafts 嵌入式無線電模組
SWRC046 — SmartRF(TM) Studio 6.13.1
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。
SmartRF Studio 支援下列 TI 裝置：
資源
CC1020EMX_REFDES — CC1020EMX 參考設計
CC1020EMX 參考設計包含 CC1020EMX 的電路圖與佈局檔案。CC1020EMX 專為輕鬆連接多數 MCU 評估模組而設計，以進行快速輕鬆的應用開發與測試。該參考設計展示了用於 CC1020 去耦和射頻配置的精湛技術。為了實現最佳射頻性能，應該精確複製這些零件。此為雙層參考設計，配備分立式阻抗匹配網路（適用於單端 50 歐姆 SMA 天線連接器）以及外部天線開關（用於實現最佳的 RF 靈敏度）。此設計包含兩份不同的零件表，適用於在 433MHz 或 868MHz 頻帶內運作。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RSS) | 32 | Ultra Librarian |