The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter together with the CC113L value line receiver enables a low cost RF link.
The RF transmitter is integrated with a configurable baseband modulator. The modem supports various modulation formats and has a configurable data rates from 0.6 to 600 kbps.
CC115L provides extensive hardware support for packet handling, data buffering and burst transmissions.
The main operating parameters and the 64- byte transmit FIFO of CC115L can be controlled via an SPI interface. In a typical system, the CC115L will be used together with a microcontroller and a few additional passive components.
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | CC115L Value Line Transmitter datasheet (Rev. B) | PDF | HTML | 2014年 5月 8日 |
| * | Errata | CC115L Errata Notes | 2011年 5月 26日 | |
| Selection guide | 無線連線技術選擇指南 (Rev. B) | 2022年 3月 7日 | ||
| Application note | Debugging Communication Range (Rev. A) | PDF | HTML | 2019年 5月 23日 | |
| White paper | Migrating your proprietary solution to the SimpleLink™ WMCU | 2018年 11月 7日 | ||
| Application note | CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) | 2017年 10月 2日 | ||
| Application note | TI LPRF EASYMODE | 2014年 12月 12日 | ||
| Application note | DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz | 2012年 11月 27日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。
一般設計問題應張貼在我們的 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGP) | 20 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.