產品詳細資料

Number of full bridges 1 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 240 Sleep current (µA) 0.01 Control mode PWM Control interface I2C Features Analog current monitor, Integrated current sense, Stall Detection, Voltage Regulator Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 1 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 240 Sleep current (µA) 0.01 Control mode PWM Control interface I2C Features Analog current monitor, Integrated current sense, Stall Detection, Voltage Regulator Rating Catalog Operating temperature range (°C) -40 to 125
WQFN (RTE) 16 9 mm² 3 x 3

  • N-channel H-bridge brushed DC motor driver
  • 1.65-V to 11-V operating supply voltage range
  • Integrated Voltage and Speed regulation
  • Soft-Start and Stop feature for inrush current protection
  • 240-mΩ RDS(on) (High-Side + Low-Side)
  • High output current capability: 4-A Peak, 2-A RMS
  • PWM with I2C control interface
    • Configuration and diagnostics on I2C registers
    • Multi-follower operation support
    • Supports standard and fast I2C mode
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current sensing and current regulation
  • Analog current sense output (IPROPI)
  • Gain select feature for:
    • High accuracy current sensing down to 10 mA
    • Optimized RDS(ON) and overcurrent limit
  • Internal charge pump with 100% duty cycle
  • Long battery life with low-power sleep mode
    • < 100 nA maximum sleep current
  • Small package and footprint
    • 16-Pin WQFN with PowerPAD™, 3 × 3 mm
  • Integrated protection features
    • VCC undervoltage lockout (UVLO)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Stall detection
    • Overvoltage protection (OVP)

  • N-channel H-bridge brushed DC motor driver
  • 1.65-V to 11-V operating supply voltage range
  • Integrated Voltage and Speed regulation
  • Soft-Start and Stop feature for inrush current protection
  • 240-mΩ RDS(on) (High-Side + Low-Side)
  • High output current capability: 4-A Peak, 2-A RMS
  • PWM with I2C control interface
    • Configuration and diagnostics on I2C registers
    • Multi-follower operation support
    • Supports standard and fast I2C mode
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current sensing and current regulation
  • Analog current sense output (IPROPI)
  • Gain select feature for:
    • High accuracy current sensing down to 10 mA
    • Optimized RDS(ON) and overcurrent limit
  • Internal charge pump with 100% duty cycle
  • Long battery life with low-power sleep mode
    • < 100 nA maximum sleep current
  • Small package and footprint
    • 16-Pin WQFN with PowerPAD™, 3 × 3 mm
  • Integrated protection features
    • VCC undervoltage lockout (UVLO)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Stall detection
    • Overvoltage protection (OVP)

The DRV8215 is a high-performance integrated H-bridge motor driver with integrated speed and voltage regulation along with additional integrated features like stall detection, current sense output, current regulation, and protection circuitry.

The integrated speed and voltage regulation feature uses the motor voltage and current information to regulate motor speed or voltage eliminating the potential need for external sensors to detect speed. This reduces board size and design complexity, and saves on overall system cost. Integrated speed regulation is used to maintain constant motor speed over varying input supply voltages which minimizes current consumption and saves power over time. This is critical in applications that have different loading conditions or rely on battery power for operation where the input voltage is not constant. Soft-start and stop allows for a controlled turn-on and turn-off time, reducing large inrush currents to protect the motor windings from damage, thereby increasing system reliability and longevity.

An internal current mirror implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current sense output allows a microcontroller to detect motor stall or changes in load conditions. The gain select feature allows high accuracy current sensing down to 10mA average motor current. Using the VREF pin, this device can regulate the motor current during startup and high-load events without interaction from a microcontroller. The device supports sensorless motor stall detection and reporting to microcontroller.

The DRV8215 is a high-performance integrated H-bridge motor driver with integrated speed and voltage regulation along with additional integrated features like stall detection, current sense output, current regulation, and protection circuitry.

The integrated speed and voltage regulation feature uses the motor voltage and current information to regulate motor speed or voltage eliminating the potential need for external sensors to detect speed. This reduces board size and design complexity, and saves on overall system cost. Integrated speed regulation is used to maintain constant motor speed over varying input supply voltages which minimizes current consumption and saves power over time. This is critical in applications that have different loading conditions or rely on battery power for operation where the input voltage is not constant. Soft-start and stop allows for a controlled turn-on and turn-off time, reducing large inrush currents to protect the motor windings from damage, thereby increasing system reliability and longevity.

An internal current mirror implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current sense output allows a microcontroller to detect motor stall or changes in load conditions. The gain select feature allows high accuracy current sensing down to 10mA average motor current. Using the VREF pin, this device can regulate the motor current during startup and high-load events without interaction from a microcontroller. The device supports sensorless motor stall detection and reporting to microcontroller.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
最新 DRV8214 現行 具無感測器熄火偵測、漣波計數和 I²C 介面的 11-V 4-A 全橋馬達驅動器 Same voltage and current but with sensorless position control
功能相同,但引腳輸出與所比較的產品不同
最新 DRV8213 現行 具整合式電流感測、電流調節和熄火偵測功能的 11-V 4-A 有刷 DC 馬達驅動器 Lower voltage support without, voltage regulation, speed regulation and sensorless position control

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet DRV8215 11V 4A Brushed DC Motor Driver with Integrated Speed Regulation and Stall Detection datasheet PDF | HTML 2024年 4月 3日
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 2024年 4月 30日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8215EVM — DRV8215 評估模組

DRV8215 評估模組 (EVM) 可用於輕鬆評估 DRV8215 裝置。EVM 已編程並配置為可立即使用並開始轉動馬達。DRV8215 是一款與 N 通道 H 橋、電荷泵、電流感測輸出、電流調節和保護電路整合的馬達驅動器。DRV8215 整合了熄火偵測、速度調節與電壓調節。三重電荷泵允許裝置以低至 1.65V 的電壓運作,以適應 1.8V 供應軌和低電池電力情況。電荷泵整合了所有電容器,並允許 100% 工作週期運作。EVM 附帶 GUI 應用以輕鬆控制馬達驅動器。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 16 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片