DRV8307

現行

42-V 最大感測梯形控制、3 相 BLDC 閘極驅動器

立即訂購

產品規格表

document-pdfAcrobat DRV8307 Brushless DC Motor Controller datasheet (Rev. A) (英文) PDF | HTML

DRV8307

現行

產品規格表

立即訂購

產品詳細資料

Rating

Catalog

Architecture

Gate driver

Control topology

Sensored, Trapezoidal

Control interface

1xPWM

Vs (min) (V)

8.5

Vs ABS (max) (V)

42

Features

Hall Element Comparators, Integrated Motor Control, Tach/FG Feedback

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Architecture

Gate driver

Control topology

Sensored, Trapezoidal

Control interface

1xPWM

Vs (min) (V)

8.5

Vs ABS (max) (V)

42

Features

Hall Element Comparators, Integrated Motor Control, Tach/FG Feedback

Operating temperature range (°C)

-40 to 85

VQFN (RHA)

40

36 mm² 6 x 6

Three-Phase Brushless DC Motor Controller
- Single PWM Input Controls Speed
Operating Supply Voltage 8.5 to 32 V
30-mA Gate-Drive Current to 6 N-Channel MOSFETs
Integrated Current Sense Amplifier
5-V Regulator for Hall Sensors
Low-Power Standby Mode
Locked Rotor Detection and Restart
Integrated Overcurrent and Overtemperature Protection
6- × 6-mm VQFN Package, 0.5-mm Pitch

Three-Phase Brushless DC Motor Controller
- Single PWM Input Controls Speed
Operating Supply Voltage 8.5 to 32 V
30-mA Gate-Drive Current to 6 N-Channel MOSFETs
Integrated Current Sense Amplifier
5-V Regulator for Hall Sensors
Low-Power Standby Mode
Locked Rotor Detection and Restart
Integrated Overcurrent and Overtemperature Protection
6- × 6-mm VQFN Package, 0.5-mm Pitch

The DRV8307 is a three half-bridge pre-driver that drives six N-type MOSFETs 30 mA with a single power supply. Aimed at sensored three-phase brushless DC motors, the DRV8307 is driven by a single PWM input and supports integrated commutation logic with three Hall sensor inputs. A separate 5-V regulator is also included to be used to power Hall-effect sensors and other external components.

The DRV8307 includes a current sense input for current limiting and protection. The current limit can be set by adjusting the value of the R_ISENSE sense resistor.

Motor operation (start and stop) is controlled through the ENABLEn terminal. If the ENABLEn terminal is set high and motor rotation has stopped, the device enters into a low-power standby state, thereby conserving overall system power during periods of inactivity.

Protection features are also included in the DRV8307 device such as locked rotor detection, as well as overcurrent and overtemperature protection and undervoltage lockout to bolster overall system robustness and reliability.

The DRV8307 is a three half-bridge pre-driver that drives six N-type MOSFETs 30 mA with a single power supply. Aimed at sensored three-phase brushless DC motors, the DRV8307 is driven by a single PWM input and supports integrated commutation logic with three Hall sensor inputs. A separate 5-V regulator is also included to be used to power Hall-effect sensors and other external components.

The DRV8307 includes a current sense input for current limiting and protection. The current limit can be set by adjusting the value of the R_ISENSE sense resistor.

Motor operation (start and stop) is controlled through the ENABLEn terminal. If the ENABLEn terminal is set high and motor rotation has stopped, the device enters into a low-power standby state, thereby conserving overall system power during periods of inactivity.

Protection features are also included in the DRV8307 device such as locked rotor detection, as well as overcurrent and overtemperature protection and undervoltage lockout to bolster overall system robustness and reliability.

filter

尋找其它整合式控制 BLDC 驅動器

下載