產品詳細資料

Number of full bridges 1 Vs (min) (V) 8 Vs ABS (max) (V) 40 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 830 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Features Current sense Amplifier Rating Automotive Operating temperature range (°C) -40 to 125
Number of full bridges 1 Vs (min) (V) 8 Vs ABS (max) (V) 40 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 830 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Features Current sense Amplifier Rating Automotive Operating temperature range (°C) -40 to 125
WQFN (RTY) 16 16 mm² 4 x 4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With The Following Results:
    • Device Temperature Grade 1: TA = –40°C to 125°C
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4
  • Low RDS(on) Outputs (0.83-Ω HS + LS Typical)
  • Low-Power Sleep Mode
  • 100% PWM Duty Cycle Supported
  • 8–38 V Operating Supply Voltage Range
  • Thermally Enhanced Surface Mount Package
  • Configurable Overcurrent Limit
  • Protection Features
    • VBB Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Short-to-supply Protection
    • Short-to-ground Protection
    • Overtemperature Warning (OTW)
    • Overtemperature Shutdown (OTS)
    • Overcurrent and Overtemperature Fault Conditions Indicated on Pins (nFAULT)
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With The Following Results:
    • Device Temperature Grade 1: TA = –40°C to 125°C
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4
  • Low RDS(on) Outputs (0.83-Ω HS + LS Typical)
  • Low-Power Sleep Mode
  • 100% PWM Duty Cycle Supported
  • 8–38 V Operating Supply Voltage Range
  • Thermally Enhanced Surface Mount Package
  • Configurable Overcurrent Limit
  • Protection Features
    • VBB Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Short-to-supply Protection
    • Short-to-ground Protection
    • Overtemperature Warning (OTW)
    • Overtemperature Shutdown (OTS)
    • Overcurrent and Overtemperature Fault Conditions Indicated on Pins (nFAULT)

The DRV8801-Q1 provides a versatile power driver solution with a full H-bridge driver. The device can drive a brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple PHASE/ENABLE interface allows easy interfacing to controller circuits

The output stages use N-channel power MOSFETs configured as ½-H-bridges. The DRV8801-Q1 is capable of peak output currents up to ±2.8 A and operating voltages up to 38 V. An internal charge pump generates needed gate drive voltages.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection functions are provided: undervoltage lockout, overcurrent protection, short-to-supply protection, short-to-ground protection, overtemperature warning, and overtemperature shutdown. Overcurrent (including short-to-ground and short-to-supply) and overtemperature fault conditions are indicated via an nFAULT pin.

The DRV8801-Q1 is packaged in a 16-pin QFN package with exposed thermal pad, providing enhanced thermal dissipation.

The DRV8801-Q1 provides a versatile power driver solution with a full H-bridge driver. The device can drive a brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple PHASE/ENABLE interface allows easy interfacing to controller circuits

The output stages use N-channel power MOSFETs configured as ½-H-bridges. The DRV8801-Q1 is capable of peak output currents up to ±2.8 A and operating voltages up to 38 V. An internal charge pump generates needed gate drive voltages.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection functions are provided: undervoltage lockout, overcurrent protection, short-to-supply protection, short-to-ground protection, overtemperature warning, and overtemperature shutdown. Overcurrent (including short-to-ground and short-to-supply) and overtemperature fault conditions are indicated via an nFAULT pin.

The DRV8801-Q1 is packaged in a 16-pin QFN package with exposed thermal pad, providing enhanced thermal dissipation.

下載 觀看有字幕稿的影片 影片

特殊說明

請參見商業級評估模組 DRV8801EVM 以評估此產品

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
DRV8876-Q1 現行 具有整合電流感測和電流感測回饋的車用 40-V、3.5-A H 橋馬達驅動器 Supports higher peak current, configurable current regulation and lower sleep current. Integrated power sense resistor saves power, space & cost.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet DRV8801-Q1 DMOS Full-Bridge Motor Drivers datasheet (Rev. D) PDF | HTML 2020年 5月 14日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) 2019年 2月 19日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

DRV8876-Q1 PSpice Transient Simulation (Rev. A)

SLVMCQ2A.ZIP (113 KB) - PSpice Model
參考設計

TIDA-00145 — 適用於電動摺疊側視鏡的汽車有刷馬達驅動器

This reference design features two evaluation modules (EVMs) to enable an easy-to-use platform to demonstrate the capability and performance of motor drivers for power-folding side mirrors.

This reference design also allows easy evaluation of full-bridge, brushed DC-motor drivers (...)
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
WQFN (RTY) 16 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片