HDC1008 不建議用於新設計
儘管為了支援以前的設計而繼續生產此項產品,但我們並不建議用在新設計上。考量下列其中一項替代產品:
open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
HDC2010 現行 2% RH 超小型、低功耗數位相對濕度感測器 Better accuracy (±2 %RH) and smaller, optimized BGA (1.5 mm × 1.5 mm)
HDC3020 現行 0.5% RH 數位濕度感測器、0.19% 長期偏移、400 nA、4 秒回應時間、NIST 可追蹤 Higher accuracy (±0.5 %RH) in QFN package (2.5 mm × 2.5 mm)
HDC3021 現行 具有可移除式膠膜上蓋的 0.5% RH 數位濕度感測器 Higher accuracy (±0.5 %RH) in QFN with removable tape for conformal coating
HDC3022 現行 具有永久式 IP67 濾波器的 0.5% RH 數位濕度感測器 Higher accuracy (±0.5 %RH) in QFN with permanent IP67 filter

產品詳細資料

Relative humidity accuracy (typ) (%RH) ±4 Temperature accuracy (typ) (°C) ±0.2 Relative humidity operating range (typ) (%RH) 0 to 100 Supply voltage (min) (V) 3 Supply voltage (max) (V) 5 Average supply current (typ) (A) 1.2 at 1 sample/sec Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
Relative humidity accuracy (typ) (%RH) ±4 Temperature accuracy (typ) (°C) ±0.2 Relative humidity operating range (typ) (%RH) 0 to 100 Supply voltage (min) (V) 3 Supply voltage (max) (V) 5 Average supply current (typ) (A) 1.2 at 1 sample/sec Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
DSBGA (YPA) 8 3.9375 mm² 2.25 x 1.75
  • Relative Humidity (RH) Operating Range 0% to
    100%
  • 14 Bit Measurement Resolution
  • Relative Humidity Accuracy ±4%
  • Temperature Accuracy ±0.2 °C
  • 200 nA Sleep Mode Current
  • Average Supply Current:
    • 820 nA @ 1sps, 11 bit RH Measurement
    • 1.2 µA @ 1sps, 11 bit RH and Temperature
      Measurement
  • Supply Voltage 3 V to 5 V
  • Tiny 2 mm × 1.6 mm Device Footprint
  • I2C Interface
  • Relative Humidity (RH) Operating Range 0% to
    100%
  • 14 Bit Measurement Resolution
  • Relative Humidity Accuracy ±4%
  • Temperature Accuracy ±0.2 °C
  • 200 nA Sleep Mode Current
  • Average Supply Current:
    • 820 nA @ 1sps, 11 bit RH Measurement
    • 1.2 µA @ 1sps, 11 bit RH and Temperature
      Measurement
  • Supply Voltage 3 V to 5 V
  • Tiny 2 mm × 1.6 mm Device Footprint
  • I2C Interface

The HDC1008 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1008 is placed on the bottom part of the device, which makes the HDC1008 more robust against dirt, dust, and other environmental contaminants. The HDC1008 is functional within the full –40°C to +125°C temperature range.

The HDC1008 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1008 is placed on the bottom part of the device, which makes the HDC1008 more robust against dirt, dust, and other environmental contaminants. The HDC1008 is functional within the full –40°C to +125°C temperature range.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet HDC1008 Low Power, High Accuracy Digital Humidity Sensor with Temperature Sensor datasheet (Rev. B) PDF | HTML 2015年 12月 1日
Technical article Achieve extremely long battery life in wireless sensor nodes PDF | HTML 2015年 6月 18日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

HDC1010 IBIS MODEL (Rev. A)

SLYM072A.ZIP (51 KB) - IBIS Model
參考設計

TIDA-00374 — 可讓鈕釦電池壽命長達 10 年以上且適用於星狀網路的濕度及溫度感測器節點參考設計

This reference design uses our nano-power system timer, SimpleLink™ ultra-low power wireless microcontroller (MCU) platform and humidity sensing technologies to demonstrate an ultra-low power method to duty-cycle sensor end nodes. These technologies lead to an extremely long battery (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00373 — 透過環境光與近距感測器執行背光及智慧照明控制的參考設計

This system conserves power and extends backlight life by dynamically adjusting the backlight brightness relative to the environment's ambient light.  A capacitive proximity sensor wakes up the system when a user is close to save even more power.

 

Watch related videos about Sensing NOW.

Design guide: PDF
電路圖: PDF
參考設計

TIDA-00484 — 可讓鈕釦電池壽命長達 10 年以上且適用於 Sub-1GHz 星狀網路的濕度及溫度感測器節點

This reference design uses our nano-power system timer, boost converter, SimpleLink™ ultra-low power Sub-1 GHz wireless microcontroller (MCU) platform and humidity sensing technologies to demonstrate an ultra-low power method to duty-cycle sensor end nodes leading to extremely long (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00488 — 適用於 Sub-1GHz 網路的能源採集環境光和環境感測器節點參考設計

TIDA-00488 demonstrates an ultra-low power and a renewable method of wireless environmental sensing using daylight energy harvesting with a long backup battery life. This reference design uses our ultra-low power harvester power management SimpleLink™ ultra-low power sub-1 GHz wireless (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00758 — 適用於低於 1GHz 網路且採用環境光的中斷式環境感測器節點參考設計

This reference design demonstrates a low-power method of wireless environmental sensing enabling up to 10 years of coin-cell battery life.  The ambient-light sensor enables lighting control for applications  such as automatic window blinds or daylight harvesting. This design uses our (...)
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
DSBGA (YPA) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片