首頁 隔離 數位隔離器
首頁
隔離
數位隔離器

ISO7742-Q1

現行

Automotive, reinforced 4-channel, 2/2, digital isolator

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
最新 ISO6442-Q1 現行 Automotive, robust EMC, reinforced/Basic 4-channel, 2/2 digital isolator with 250kV/us CMTI, 150Mbps Pin-to-pin cost-effective solution; 250kV/us CMTI and 150 Mbps that supports most digital isolation applications

ISO7742-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Integrated isolated power No Number of channels 4 Forward/reverse channels 2 forward / 2 reverse Data rate (max) (Mbps) 100 Protocols GPIO, PWM, SPI, UART SPI frequency (max) (MHz) 14.5 Propagation delay time (typ) (ns) 10.7 Propagation delay time (max) (ns) 17 Part-to-part output skew (max) (ns) 4.4 Pulse-width distortion (t(PHL) - t(PLH)) (max) (ns) 5.9 Channel-to-channel output skew (max) (ns) 4 Certifications CQC, CSA, DIN, TUV Isolation rating Basic, Reinforced Working isolation voltage (VIOWM) (Vrms) 1500 Withstand isolation voltage (VISO) (Vrms) 3000, 5000 Surge isolation voltage (VIOSM) (kVPK) 10, 12.8 CMTI (min) (kV/µs) 85 Default output High, Low Creepage (min) (mm) 3.7, 8 Current consumption per channel (DC) (typ) (mA) 0.72 Current consumption per channel (1 Mbps) (typ) (mA) 1.45 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Transient isolation voltage (VIOTM) (VPK) 4242, 8000 Clearance (min) (mm) 3.7, 8
Rating Automotive Integrated isolated power No Number of channels 4 Forward/reverse channels 2 forward / 2 reverse Data rate (max) (Mbps) 100 Protocols GPIO, PWM, SPI, UART SPI frequency (max) (MHz) 14.5 Propagation delay time (typ) (ns) 10.7 Propagation delay time (max) (ns) 17 Part-to-part output skew (max) (ns) 4.4 Pulse-width distortion (t(PHL) - t(PLH)) (max) (ns) 5.9 Channel-to-channel output skew (max) (ns) 4 Certifications CQC, CSA, DIN, TUV Isolation rating Basic, Reinforced Working isolation voltage (VIOWM) (Vrms) 1500 Withstand isolation voltage (VISO) (Vrms) 3000, 5000 Surge isolation voltage (VIOSM) (kVPK) 10, 12.8 CMTI (min) (kV/µs) 85 Default output High, Low Creepage (min) (mm) 3.7, 8 Current consumption per channel (DC) (typ) (mA) 0.72 Current consumption per channel (1 Mbps) (typ) (mA) 1.45 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Transient isolation voltage (VIOTM) (VPK) 4242, 8000 Clearance (min) (mm) 3.7, 8
SSOP (DBQ) 16 29.4 mm² (4.9 mm × 6 mm) SOIC (DW) 16 106.09 mm² (10.3 mm × 10.3 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature Grade 1: –40°C to 125°C ambient operating temperature
  • Functional Safety-Capable
  • 100Mbps data rate
  • Robust isolation barrier:
    • >30-year projected lifetime at 1500VRMS working voltage
    • Up to 5700VRMS isolation rating
    • Up to 12.8kV surge capability
    • ±100kV/µs typical CMTI
  • Wide supply range: 2.25V to 5.5V
  • 2.25V to 5.5V level translation
  • Default output high (ISO774x) and low (ISO774xF) options
  • Low power consumption, typical 1.5mA per channel at 1Mbps
  • Low propagation delay: 10.7ns typical (5V Supplies)
  • Robust electromagnetic compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • ±8kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Low emissions
  • Extra-wide SOIC (DWW-16), wide-SOIC (DW-16) and QSOP (DBQ-16) package options
  • Safety-related certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program
    • IEC 61010-1, IEC 62368-1, IEC 60601-1, and GB 4943.1 certifications
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature Grade 1: –40°C to 125°C ambient operating temperature
  • Functional Safety-Capable
  • 100Mbps data rate
  • Robust isolation barrier:
    • >30-year projected lifetime at 1500VRMS working voltage
    • Up to 5700VRMS isolation rating
    • Up to 12.8kV surge capability
    • ±100kV/µs typical CMTI
  • Wide supply range: 2.25V to 5.5V
  • 2.25V to 5.5V level translation
  • Default output high (ISO774x) and low (ISO774xF) options
  • Low power consumption, typical 1.5mA per channel at 1Mbps
  • Low propagation delay: 10.7ns typical (5V Supplies)
  • Robust electromagnetic compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • ±8kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Low emissions
  • Extra-wide SOIC (DWW-16), wide-SOIC (DW-16) and QSOP (DBQ-16) package options
  • Safety-related certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program
    • IEC 61010-1, IEC 62368-1, IEC 60601-1, and GB 4943.1 certifications

The ISO774x-Q1 automotive devices are high-performance, quad-channel digital isolators with 5700VRMS (DWW package), 5000VRMS (DW package) and 3000VRMS (DBQ package) isolation ratings per UL 1577. This family of devices has reinforced insulation ratings according to VDE, CSA, TUV and CQC.

The ISO774x-Q1 devices provide high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO2) insulation barrier. These devices come with enable pins which can be used to put the respective outputs in high impedance for multi-controller driving applications and to reduce power consumption. The ISO7740-Q1 device has all four channels in the same direction, the ISO7741-Q1 device has three forward and one reverse-direction channels, and the ISO7742-Q1 device has two forward and two reverse-direction channels. If the input power or signal is lost, default output is high for devices without suffix F and low for devices with suffix F. See the Device Functional Modes section for further details.

The ISO774x-Q1 automotive devices are high-performance, quad-channel digital isolators with 5700VRMS (DWW package), 5000VRMS (DW package) and 3000VRMS (DBQ package) isolation ratings per UL 1577. This family of devices has reinforced insulation ratings according to VDE, CSA, TUV and CQC.

The ISO774x-Q1 devices provide high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO2) insulation barrier. These devices come with enable pins which can be used to put the respective outputs in high impedance for multi-controller driving applications and to reduce power consumption. The ISO7740-Q1 device has all four channels in the same direction, the ISO7741-Q1 device has three forward and one reverse-direction channels, and the ISO7742-Q1 device has two forward and two reverse-direction channels. If the input power or signal is lost, default output is high for devices without suffix F and low for devices with suffix F. See the Device Functional Modes section for further details.
filter 尋找其它 數位隔離器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 17
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ISO774x-Q1 Automotive, High-Speed, Reinforced Quad-Channel Digital Isolators datasheet (Rev. G) PDF | HTML 2024/10/11
證書 VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. AB) 2026/7/15
應用說明 Understand Safety Requirements and Isolation for High-Voltage Application Part I PDF | HTML 2026/6/15
證書 CSA Certificate for ISO77xxDW (Rev. C) 2026/5/7
證書 TUV Certificate for Isolation Devices (Rev. M) 2026/5/7
證書 CSA Certificate for ISO77xxDBQ (Rev. B) 2026/5/7
證書 UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. S) 2026/5/7
白皮書 Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. D) PDF | HTML 2025/11/7
證書 CQC Certificate for ISOxxDBQ (Rev. B) 2025/8/19
證書 CQC Certificate for ISOxxDWx (Rev. K) 2025/8/18
應用說明 IEC60601-1-2 Compliant Dig. Iso Design W/ 16-kV Contact Discharge ESD Protection PDF | HTML 2023/2/16
白皮書 Why are Digital Isolators Certified to Meet Electrical Equipment Standards? 2021/11/16
白皮書 Distance Through Insulation: How Digital Isolators Meet Certification Requiremen PDF | HTML 2021/6/11
Application brief How to Replace Optocouplers with Digital Isolators in Standard Interface Circuit (Rev. A) PDF | HTML 2021/5/19
功能安全資訊 ISO7742-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2020/6/18
Application brief Considerations for Selecting Digital Isolators 2018/7/24
Application brief Simplify current and voltage monitoring with isolated SPI and I2C in your BMS 2018/7/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIGI-ISO-EVM — 通用數位隔離器評估模組

DIGI-ISO-EVM 是一款評估模組 (EVM)，可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置，並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項，可用於評估具最少外部零組件的裝置。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ISO7741DBQEVM — ISO7741 評估模組（DBQ 封裝）

ISO7741DBQEVM 是一款評估模組，可用於評估採用 16 接腳 SSOP 封裝（封裝代碼 DBQ）的 ISO7741 高性能、強化型四通道數位隔離器。EVM 具備足夠的測試點和跨接器選項，可用於評估具最少外部零組件的裝置。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ISO7741EVM — EMC 性能優異的 ISO7741 高速四通道數位隔離器評估模組

ISO7741EVM 是用於評估 ISO7741 的評估模組 (EVM)。ISO7741 是一款高性能、強化型四通道數位隔離器，並採用寬體 SOIC 封裝（封裝代碼 DW）。EVM 具備足夠的測試點和跨接器選項，可用於評估具最少外部零組件的裝置。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

ISO7742 IBIS Model (Rev. A)

SLLM312A.ZIP (62 KB) - IBIS 模型
支援產品和硬體
模擬型號

ISO7742 PSpice Transient Model

SLLM472.ZIP (243 KB) - PSpice 模型
支援產品和硬體
參考設計

PMP23547 — GaN 式 8kW 三相圖騰柱功率因數校正和三相 LLC 參考設計

此參考設計為高密度且高效率的 8kW 電源供應器。第一個階段是三角傳導模式 (TCM) 功率因數校正 (PFC) 轉換器，接著是連接 Δ-Δ 的三相電感器 - 電感器 - 電容器 (LLC) 轉換器。兩個功率級均採用 TI 高性能氮化鎵 (GaN) 電源開關來實現。PFC 在零電流偵測 (ZCD) 架構控制機制中採用三相圖騰柱 PFC。控制方法以可變頻率運作，且可在所有操作條件下維持零電壓切換 (ZVS)。此控制透過 TMS320F280039C 高性能微控制器和含整合式 ZCD 感測的 LMG3527R030 GaN 場效應電晶體 (FET) 來執行。轉換器的運作頻率範圍約在 70kHz (...)
支援產品和硬體
參考設計

TIDA-020030 — SiC/IGBT 隔離式閘極驅動器參考設計，具備熱二極體與感測 FET

此參考設計為 IGBT 或 SiC 絕緣式閘極驅動器功率級，可驅動含進階防護功能的 IGBT 模組。此設計包含牽引逆變器的單相功率級，可支援高階安全功能。IGBT 模組具備整合式熱二極體，可進行溫度監控，並感測 FET 以進行過電流防護，提供快速而準確的防護。其中包括偏壓電源供應及其輸出電壓監控，備援電路中的隔離式 DC 匯流排感測，高側及低側驅動器的溫度感測，PWM 閘極訊號監控，故障訊號注入診斷。此電源供應接受 4.5V 至 65V DC 的廣泛輸入範圍，並可提供高達 180mA 的輸出電流。隔離式閘極驅動器具有高達 ±10A 的驅動強度，還包括用於溫度和電壓感測的類比轉 PWM 轉換器。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SSOP (DBQ) 16 Ultra Librarian
SOIC (DW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片