產品詳細資料

Rating Catalog Integrated isolated power No Isolation rating Reinforced Number of channels 4 Forward/reverse channels 3 forward / 1 reverse Default output High, Low Data rate (max) (Mbps) 100 Protocols GPIO, PWM, SPI, UART Surge isolation voltage (VIOSM) (VPK) 12800 Transient isolation voltage (VIOTM) (VPK) 8000 Withstand isolation voltage (VISO) (Vrms) 5700 CMTI (min) (V/µs) 85000 Operating temperature range (°C) -55 to 125 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.25 Propagation delay time (typ) (µs) 0.0107 Current consumption per channel (DC) (typ) (mA) 0.9 Current consumption per channel (1 Mbps) (typ) (mA) 1.53 Creepage (min) (mm) 8, 14.5 Clearance (min) (mm) 8, 14.5
Rating Catalog Integrated isolated power No Isolation rating Reinforced Number of channels 4 Forward/reverse channels 3 forward / 1 reverse Default output High, Low Data rate (max) (Mbps) 100 Protocols GPIO, PWM, SPI, UART Surge isolation voltage (VIOSM) (VPK) 12800 Transient isolation voltage (VIOTM) (VPK) 8000 Withstand isolation voltage (VISO) (Vrms) 5700 CMTI (min) (V/µs) 85000 Operating temperature range (°C) -55 to 125 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.25 Propagation delay time (typ) (µs) 0.0107 Current consumption per channel (DC) (typ) (mA) 0.9 Current consumption per channel (1 Mbps) (typ) (mA) 1.53 Creepage (min) (mm) 8, 14.5 Clearance (min) (mm) 8, 14.5
SOIC (DW) 16 106.09 mm² 10.3 x 10.3 SOIC (DWW) 16 177.675 mm² 10.3 x 17.25
  • Signaling Rate: Up to 100Mbps
  • Wide Supply Range: 2.25V to 5.5V
  • 2.25V to 5.5V Level Translation
  • Wide Temperature Range: –55°C to 125°C
  • Low-Power Consumption, Typical 1.7mA per Channel at 1Mbps
  • Low Propagation Delay: 11ns Typical (5V Supplies)
  • Industry leading CMTI (Min): ±100kV/µs
  • Robust Electromagnetic Compatibility (EMC)
  • System-Level ESD, EFT, and Surge Immunity
  • Low Emissions
  • Isolation Barrier Life: >40 Years
  • Wide Body SOIC-16 Package and Extra-Wide Body SOIC-16 Package Options
  • Safety and Regulatory Approvals:
    • 8000VPK Reinforced Isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • 5.7kVRMS Isolation for 1 Minute per UL 1577
    • CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 60601-1 End Equipment Standards
    • CQC Certification per GB4943.1
    • TUV Certification per EN 61010-1 and EN 62368-1
  • Signaling Rate: Up to 100Mbps
  • Wide Supply Range: 2.25V to 5.5V
  • 2.25V to 5.5V Level Translation
  • Wide Temperature Range: –55°C to 125°C
  • Low-Power Consumption, Typical 1.7mA per Channel at 1Mbps
  • Low Propagation Delay: 11ns Typical (5V Supplies)
  • Industry leading CMTI (Min): ±100kV/µs
  • Robust Electromagnetic Compatibility (EMC)
  • System-Level ESD, EFT, and Surge Immunity
  • Low Emissions
  • Isolation Barrier Life: >40 Years
  • Wide Body SOIC-16 Package and Extra-Wide Body SOIC-16 Package Options
  • Safety and Regulatory Approvals:
    • 8000VPK Reinforced Isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • 5.7kVRMS Isolation for 1 Minute per UL 1577
    • CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 60601-1 End Equipment Standards
    • CQC Certification per GB4943.1
    • TUV Certification per EN 61010-1 and EN 62368-1

The ISO7841x device is a high-performance, quad-channel digital isolator with a 8000VPK isolation voltage. This device has reinforced isolation certifications according to VDE, CSA, CQC, and TUV. The isolator provides high electromagnetic immunity and low emissions at low-power consumption while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a silicon-dioxide (SiO2) insulation barrier.

This device comes with enable pins that can be used to put the respective outputs in high impedance for multi-controller driving applications and to reduce power consumption. The ISO7841 device has three forward and one reverse-direction channels. If the input power or signal is lost, the default output is high for the ISO7841 device and low for the ISO7841F device. See the Device Functional Modes section for further details.

Used in conjunction with isolated power supplies, this device helps prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO7841 device has been significantly enhanced to ease system-level ESD, EFT, surge, and emissions compliance.

The ISO7841 device is available in 16-pin SOIC wide-body (DW) and extra-wide body (DWW) packages.

The ISO7841x device is a high-performance, quad-channel digital isolator with a 8000VPK isolation voltage. This device has reinforced isolation certifications according to VDE, CSA, CQC, and TUV. The isolator provides high electromagnetic immunity and low emissions at low-power consumption while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a silicon-dioxide (SiO2) insulation barrier.

This device comes with enable pins that can be used to put the respective outputs in high impedance for multi-controller driving applications and to reduce power consumption. The ISO7841 device has three forward and one reverse-direction channels. If the input power or signal is lost, the default output is high for the ISO7841 device and low for the ISO7841F device. See the Device Functional Modes section for further details.

Used in conjunction with isolated power supplies, this device helps prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO7841 device has been significantly enhanced to ease system-level ESD, EFT, surge, and emissions compliance.

The ISO7841 device is available in 16-pin SOIC wide-body (DW) and extra-wide body (DWW) packages.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 28
類型 標題 日期
* Data sheet ISO7841x High-Performance, 8000VPK Reinforced Quad-Channel Digital Isolator datasheet (Rev. I) PDF | HTML 2024年 11月 20日
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. V) 2025年 2月 7日
White paper Understanding failure modes in isolators (Rev. B) PDF | HTML 2024年 1月 29日
Application note Digital Isolator Design Guide (Rev. G) PDF | HTML 2023年 9月 13日
White paper Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) PDF | HTML 2023年 9月 7日
White paper Circuit Board Insulation Design According to IEC60664 for Motor Drive Apps PDF | HTML 2023年 8月 31日
Certificate CQC Certificate for ISOxxDWx (Rev. J) 2023年 3月 27日
Certificate CSA Certificate for ISO78xxDWx 2023年 3月 13日
Certificate TUV Certificate for Isolation Devices (Rev. K) 2022年 8月 5日
Certificate UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. P) 2022年 8月 5日
White paper Why are Digital Isolators Certified to Meet Electrical Equipment Standards? 2021年 11月 16日
White paper Distance Through Insulation: How Digital Isolators Meet Certification Requiremen PDF | HTML 2021年 6月 11日
EVM User's guide Universal Digital Isolator Evaluation Module PDF | HTML 2021年 3月 4日
Technical article Understand and apply safety-limiting values for digital isolators PDF | HTML 2021年 1月 20日
Functional safety information Isolation in AC Motor Drives: Understanding the IEC 61800-5-1 Safety Standard (Rev. A) 2019年 9月 19日
Application brief A Reinforced-isolated Analog Input Chain for Space-constrained Applications 2019年 9月 1日
Analog Design Journal Pushing the envelope with high-performance digital-isolation technology (Rev. A) 2018年 8月 22日
Application brief Considerations for Selecting Digital Isolators 2018年 7月 24日
Functional safety information Isolation in solar power converters: Understanding the IEC62109-1 safety standar (Rev. A) 2018年 5月 18日
Analog Design Journal How to reduce radiated emissions of digital isolators for systems with RF module 2018年 3月 26日
Application note Isolation Glossary (Rev. A) 2017年 9月 19日
Analog Design Journal How to use isolation to improve ESD, EFT and surge immunity in industrial system 2017年 7月 24日
Analog Design Journal 4Q 2015 Analog Applications Journal 2015年 10月 30日
Analog Design Journal Common-mode transient immunity for isolated gate drivers 2015年 10月 30日
Analog Design Journal Pushing the envelope with high-performance digital-isolation technology 2015年 10月 30日
EVM User's guide ISO784xx Quad-Channel Digital Isolator EVM User Guide 2014年 10月 17日
White paper Understanding electromagnetic compliance tests in digital isolators 2014年 10月 17日
White paper High-voltage reinforced isolation: Definitions and test methodologies 2014年 10月 16日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIGI-ISO-EVM — 通用數位隔離器評估模組

DIGI-ISO-EVM 是一款評估模組 (EVM),可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置,並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項,可用於評估具最少外部零組件的裝置。

使用指南: PDF | HTML
TI.com 無法提供
開發板

ISO7842-EVM — 高抗擾度、5.7kVRMS 強化四通道 2/2 數位隔離器評估模組

The ISO7842 provides galvanic isolation up to 5700 VRMS for 1 minute per UL and 8000 VPK per VDE. This device has four isolated channels comprised of a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, this (...)

使用指南: PDF
TI.com 無法提供
模擬型號

ISO7841 IBIS Model (Rev. A)

SLLM267A.ZIP (52 KB) - IBIS Model
模擬型號

ISO7841F IBIS Model (Rev. A)

SLLM277A.ZIP (52 KB) - IBIS Model
參考設計

TIDA-010272 — 適用於儲能系統的 1500V 高電壓機架監測器單元參考設計

This reference design is a high-voltage, current and insulation impedance accuracy lithium-ion (Li-ion), LiFePO4 battery rack. The design monitors four high-voltage bus inputs, one shunt current and temperature, and one insulation impedance of the battery. The design protects the battery rack to (...)
Design guide: PDF
參考設計

TIDA-01576 — 具有 16 位元 1-MSPS 雙同步取樣 ADC 的高準確度類比輸入模組參考設計

此參考設計在廣泛輸入範圍內,使用精密 16 位元 SAR ADC 準確測量 16 通道 AC 電壓及電流輸入。此範圍涵蓋保護與測量要求 (包括 IEC 61850-9-2 的取樣要求),可簡化系統設計並提升跳脫時間重複性、性能與可靠性。AC 類比輸入模組 (AIM) 使用具有整合電源轉換器或採用六通道的數位隔離器,與主機處理器隔離。在最簡單的配置中,完整的 AC AIM 只需使用五種 TI 產品即可設計,進而實現系統成本與尺寸最佳化。警報功能會以取樣方式識別 AC AIM 故障,以加快故障偵測速度。ADC 具有額外的輔助通道,可診斷數位隔離器電源的輸出,或補償量測類比輸入的溫度漂移。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01214 — 採用16 位元 ADC 和數位隔離器的隔離式高準確度類比輸入模組參考設計

此參考設計在廣泛輸入範圍內使用精密 16 位元 SAR ADC,提供準確的 AC 電壓和電流輸入測量,涵蓋保護和測量範圍 (包括 IEC 61850-9-2 的取樣要求)、簡化系統設計,並改善跳脫時間性能和可靠性。類比輸入模組 (AIM) 使用具有整合電源的數位隔離器,與主機處理器隔離。針對有限功能與成本最佳化的設計方法,AC AIM 僅可使用三種 TI 產品設計,可降低系統成本與電路板尺寸。警報功能會以取樣方式識別 AC 類比輸入故障,以加快故障偵測速度。ADC 具有額外的輔助通道,可診斷數位隔離器的電源輸出。具增益放大器的 12 位元 ADS8668 (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DW) 16 Ultra Librarian
SOIC (DWW) 16 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片