產品詳細資料

Frequency range 76 - 81 GHz Number of receivers 8 Number of transmitters 8 Edge AI enabled No Interface type CAN-FD, MIPI-CSI2, SPI Operating temperature range (°C) -40 to 125 Power supply solution LP87745-Q1 Rating Catalog
Frequency range 76 - 81 GHz Number of receivers 8 Number of transmitters 8 Edge AI enabled No Interface type CAN-FD, MIPI-CSI2, SPI Operating temperature range (°C) -40 to 125 Power supply solution LP87745-Q1 Rating Catalog
FCCSP (APE) 573 91 mm² (14 mm × 6.5 mm)
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband, and ADC
    • 76-81GHz operation with up to 4.5GHz continuous chirp bandwidth
    • Eight receive channels
    • Eight transmit channels
    • Ultra-accurate chirp engine based on Fractional-N PLL
    • TX power: 13dBm
    • RX noise figure: 11dB
    • Supports P1dB up to -6.5dBm
    • Industry leading 8 transmitter, 8 receiver radar front end with 2.8W power consumption
    • Supports less than 3 µs chirp idle time for excellent max velocity measurements
    • Maximum chirp slope of 266MHz/µs to enable rapid high-bandwidth measurements
    • ADC Sample rate up to 66.67 Msps for exceptional instrumentation range distance
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI or I2C interface
    • Data interface with external processor over MIPI D-PHY and CSI2 v1.2
    • Interrupts for Fault Reporting
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid functional safety system design
    • Hardware integrity up to SIL 2 targeted as per IEC61508 standard
  • IWR2188 advanced features
    • Embedded self-monitoring with limited Host processor involvement
    • Option of cascading multiple devices to increase channel count
    • Embedded interference detection capability
  • Power management
    • Built-in LDO Network for enhanced PSRR
    • I/Os support dual voltage 3.3V/1.8V
  • Clock source
    • Supports externally driven clock (square/sine) at 50 MHz or 40 MHz
    • Supports 50 MHz or 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • Production proven innovative Launch on Package (LOP) technology with easy to route launcher positions
    • 0.5mm pitch 14mm × 15mm FCCSP package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband, and ADC
    • 76-81GHz operation with up to 4.5GHz continuous chirp bandwidth
    • Eight receive channels
    • Eight transmit channels
    • Ultra-accurate chirp engine based on Fractional-N PLL
    • TX power: 13dBm
    • RX noise figure: 11dB
    • Supports P1dB up to -6.5dBm
    • Industry leading 8 transmitter, 8 receiver radar front end with 2.8W power consumption
    • Supports less than 3 µs chirp idle time for excellent max velocity measurements
    • Maximum chirp slope of 266MHz/µs to enable rapid high-bandwidth measurements
    • ADC Sample rate up to 66.67 Msps for exceptional instrumentation range distance
  • Built-in calibration and self-test
    • Built-in firmware (ROM)
    • Self-calibrating system across process and temperature
  • Host interface
    • Control interface with external processor over SPI or I2C interface
    • Data interface with external processor over MIPI D-PHY and CSI2 v1.2
    • Interrupts for Fault Reporting
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid functional safety system design
    • Hardware integrity up to SIL 2 targeted as per IEC61508 standard
  • IWR2188 advanced features
    • Embedded self-monitoring with limited Host processor involvement
    • Option of cascading multiple devices to increase channel count
    • Embedded interference detection capability
  • Power management
    • Built-in LDO Network for enhanced PSRR
    • I/Os support dual voltage 3.3V/1.8V
  • Clock source
    • Supports externally driven clock (square/sine) at 50 MHz or 40 MHz
    • Supports 50 MHz or 40 MHz crystal connection with load capacitors
  • Easy hardware design
    • Production proven innovative Launch on Package (LOP) technology with easy to route launcher positions
    • 0.5mm pitch 14mm × 15mm FCCSP package for easy assembly and low-cost PCB design
    • Small solution size
  • Operating Conditions
    • Junction temp range: –40°C to 125°C

The IWR2188 device is an integrated single-chip FMCW transceiver capable of operation in the 76GHz to 81GHz band. The device enables unprecedented levels of integration in an extremely small form factor. IWR2188 is designed for low power, self-monitored, ultra-accurate radar systems in the industrial space.

The IWR2188 device is a self-contained FMCW transceiver single-chip device that simplifies the implementation of Industrial Radar sensors in the band of 76GHz to 81GHz. The device is built on TI’s low-power 45nm RFCMOS process, which enables a monolithic implementation of a 8TX, 8RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform device including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

The IWR2188 device is an integrated single-chip FMCW transceiver capable of operation in the 76GHz to 81GHz band. The device enables unprecedented levels of integration in an extremely small form factor. IWR2188 is designed for low power, self-monitored, ultra-accurate radar systems in the industrial space.

The IWR2188 device is a self-contained FMCW transceiver single-chip device that simplifies the implementation of Industrial Radar sensors in the band of 76GHz to 81GHz. The device is built on TI’s low-power 45nm RFCMOS process, which enables a monolithic implementation of a 8TX, 8RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform device including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 IWR2188 Single Chip 8x8 Cascadable 76-to-81 GHz Transceiver datasheet PDF | HTML 2026/9/16

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ 整合式開發環境 (IDE) 是 TI 廣泛的 CCStudio™ 開發生態系統的一部分,是用於 TI 微控制器、處理器、無線連線裝置及雷達感測器的整合式開發環境。CCStudio IDE 可用作桌上型或雲端型應用程式。雲端版本免去了大量軟體下載。此外,由於此工具建立在 Eclipse Theia 架構上,因此 VS Code® 使用者對此介面十分熟悉。如果您選擇直接使用 VS Code,也可以在市集中找到 TI 提供的 VS Code 擴充套件,可支援特定裝置。

AI 驅動開發
CCStudio IDE 整合業界標準的 AI (...)

支援產品和硬體
線上培訓

RADAR-ACADEMY — mmWave Radar Academy

The Radar Academy is a documentation package intended to provide educational resources related to mmWave radar technology
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
支援軟體

RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools

The Radar Toolbox is a collection of demos, software tools, and documentation designed to assist in the evaluation of TI Radar Devices
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
FCCSP (APE) 573 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片