產品詳細資料

Local sensor accuracy (max) 4 Type Remote Operating temperature range (°C) 0 to 125 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 1700 Temp resolution (max) (Bits) 8 Remote channels (#) 1 Addresses 1 Rating Catalog
Local sensor accuracy (max) 4 Type Remote Operating temperature range (°C) 0 to 125 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 1700 Temp resolution (max) (Bits) 8 Remote channels (#) 1 Addresses 1 Rating Catalog
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Accurately Senses Die Temperature of Remote ICs or Diode Junctions
  • Offset Register Allows Sensing a Variety of Thermal Diodes Accurately
  • On-board Local Temperature Sensing
  • 10 Bit Plus Sign Remote Diode Temperature Data Format, 0.125°C Resolution
  • Diode Fault Detection Circuitry
  • T_CRIT_A Output Useful for System Shutdown (Open Diode does not Activate T_CRIT_A)
  • ALERT Output Supports SMBus 2.0 Protocol
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • 8-pin VSSOP Package

Key Specifications

  • Supply Voltage 3.0 to 3.6 V
  • Supply Current 0.8 mA (Typ)
  • Local Temp Accuracy (Includes Quantization Error)
    • TA=25°C to 125°C, ±4.0 °C (Max)
  • Remote Diode Temp Accuracy (Includes Quantization Error)
    • TA=30°C to 50°C, TD=60°C to 100°C, ±3.0 °C (Max)
    • TA=0°C to 85°C, TD=25°C to 125°C, ±4.0 °C (Max)

  • Accurately Senses Die Temperature of Remote ICs or Diode Junctions
  • Offset Register Allows Sensing a Variety of Thermal Diodes Accurately
  • On-board Local Temperature Sensing
  • 10 Bit Plus Sign Remote Diode Temperature Data Format, 0.125°C Resolution
  • Diode Fault Detection Circuitry
  • T_CRIT_A Output Useful for System Shutdown (Open Diode does not Activate T_CRIT_A)
  • ALERT Output Supports SMBus 2.0 Protocol
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • 8-pin VSSOP Package

Key Specifications

  • Supply Voltage 3.0 to 3.6 V
  • Supply Current 0.8 mA (Typ)
  • Local Temp Accuracy (Includes Quantization Error)
    • TA=25°C to 125°C, ±4.0 °C (Max)
  • Remote Diode Temp Accuracy (Includes Quantization Error)
    • TA=30°C to 50°C, TD=60°C to 100°C, ±3.0 °C (Max)
    • TA=0°C to 85°C, TD=25°C to 125°C, ±4.0 °C (Max)

The LM90 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) serial interface. The LM90 accurately measures its own temperature as well as the temperature of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The temperature of any ASIC can be accurately determined using the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die. The LM90 remote sensor accuracy of ±3°C is factory trimmed for the 1.008 typical non-ideality factor of the mobile Pentium III thermal diode. The LM90 has an Offset register to allow measuring other diodes without requiring continuous software management.

Activation of the ALERT output occurs when any temperature goes outside a preprogrammed window set by the HIGH and LOW temperature limit registers or exceeds the T_CRIT temperature limit. Activation of the T_CRIT_A occurs when any temperature exceeds the T_CRIT programmed limit. The LM90 is pin and register compatible with the LM86, Analog Devices ADM1032 and Maxim MAX6657/8.

The LM90 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) serial interface. The LM90 accurately measures its own temperature as well as the temperature of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The temperature of any ASIC can be accurately determined using the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die. The LM90 remote sensor accuracy of ±3°C is factory trimmed for the 1.008 typical non-ideality factor of the mobile Pentium III thermal diode. The LM90 has an Offset register to allow measuring other diodes without requiring continuous software management.

Activation of the ALERT output occurs when any temperature goes outside a preprogrammed window set by the HIGH and LOW temperature limit registers or exceeds the T_CRIT temperature limit. Activation of the T_CRIT_A occurs when any temperature exceeds the T_CRIT programmed limit. The LM90 is pin and register compatible with the LM86, Analog Devices ADM1032 and Maxim MAX6657/8.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LM90 +-;3C Accurate, Remote Diode & Local Dig Temp Sensor w/2-Wire Interface datasheet (Rev. A) 2013年 3月 25日
User guide LM86, LM89, LM89-1, LM90, LM99, LM99-1 Evaluation Board User’s Guide 2012年 2月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

驅動程式或資料庫

LM90SW-LINUX — 適用於 LM90 的 Linux 驅動程式

The Linux driver supports the LM90 series of Remote and Local Temp Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • (...)
支援軟體

DIGITALTEMPSENSORSEVM-SW Eval Board Software for Hardware Monitors and Digital Temp Sensors

Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
LM63 具風扇控制的 1 個遠端與本機溫度感測器 LM64 具風扇控制與 5 個 GPIO 的 1 個遠端與本機溫度感測器 LM71 具 SPI 介面的 ±1.5°C 溫度感測器 LM71-Q1 具 SPI 介面的汽車級、±1.5°C 溫度感測器 LM73 具 I2C/SMBus 介面的 ±1°C 溫度感測器 LM86 具 SMBu 介面的 ±0.75°C 遠端和本機溫度感測器 LM89 具 SMBus 介面和 2 個匯流排分載位址的 ± 0.75 ° C 遠端和本機溫度感測器 LM90 具 SMBus 介面的遠端和本機溫度感測器 LM93 具硬體監控器和 16 個電源電壓監控器的 2 個遠端、1 個本機溫度感測器 LM95010 具 SensorPath 介面的 ±2°C 溫度感測器 LM95071 具 SPI 介面的 ±1°C 溫度感測器 LM95221 具 beta 補償和 SMBus、I2C 介面的 ±3°C 雙遠端和本機溫度感測器 LM95231 具 TruTherm™ 技術和 SMBus 介面的雙遠端和本機溫度感測器 LM95235 具 SMBus、beta 補償且適用 65/90nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM95235-Q1 具 TruTherm™ 技術和 SMBus 的汽車級 ±2°C 遠端和本機溫度感測器 LM96000 具風扇控制和 6 個電源電壓監控器的硬體監控器 LM96080 具風扇速度和電源電壓監控器的 1 個本機溫度感測器 LM96163 具 beta 補償和風扇控制的 1 個遠端與本機溫度感測器 LM99 具 TruTherm™ 技術和 SMBus 介面的遠端和本機溫度感測器
支援軟體

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
LM63 具風扇控制的 1 個遠端與本機溫度感測器 LM64 具風扇控制與 5 個 GPIO 的 1 個遠端與本機溫度感測器 LM71 具 SPI 介面的 ±1.5°C 溫度感測器 LM71-Q1 具 SPI 介面的汽車級、±1.5°C 溫度感測器 LM73 具 I2C/SMBus 介面的 ±1°C 溫度感測器 LM75A 2C 業界標準溫度感測器、I2C/SMBus 介面 LM86 具 SMBu 介面的 ±0.75°C 遠端和本機溫度感測器 LM89 具 SMBus 介面和 2 個匯流排分載位址的 ± 0.75 ° C 遠端和本機溫度感測器 LM90 具 SMBus 介面的遠端和本機溫度感測器 LM93 具硬體監控器和 16 個電源電壓監控器的 2 個遠端、1 個本機溫度感測器 LM95010 具 SensorPath 介面的 ±2°C 溫度感測器 LM95071 具 SPI 介面的 ±1°C 溫度感測器 LM95172-Q1 具 200°C 功能和 SPI 介面的汽車級 ±1°C 溫度感測器 LM95214 具 SMBus 介面的 ±2°C 四遠端和本機溫度感測器 LM95221 具 beta 補償和 SMBus、I2C 介面的 ±3°C 雙遠端和本機溫度感測器 LM95231 具 TruTherm™ 技術和 SMBus 介面的雙遠端和本機溫度感測器 LM95233 具 TruTherm™ 技術和 SMBus 介面的 ±2°C 雙遠端和本機溫度感測器 LM95234 具 TruTherm™ 技術和 SMBus 介面的 ±2°C 雙遠端和本機溫度感測器 LM95235 具 SMBus、beta 補償且適用 65/90nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM95235-Q1 具 TruTherm™ 技術和 SMBus 的汽車級 ±2°C 遠端和本機溫度感測器 LM95241 具 beta 補償和 SMBus、I2C 介面的 ±1.25°C 雙遠端和本機溫度感測器 LM95245 具 SMBus、beta 補償且適用 45nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM96000 具風扇控制和 6 個電源電壓監控器的硬體監控器 LM96080 具風扇速度和電源電壓監控器的 1 個本機溫度感測器 LM96163 具 beta 補償和風扇控制的 1 個遠端與本機溫度感測器 LM99 具 TruTherm™ 技術和 SMBus 介面的遠端和本機溫度感測器
精確 ADC
ADC128D818 具溫度感測器、內部/外部電壓參考和 I2C 介面的 12 位元 82SPS 8 通道 ΔΣ ADC
封裝 引腳 下載
VSSOP (DGK) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片