LMP91002
- Typical Values, TA = 25°C
- Supply Voltage 2.7 V to 3.6 V
- Supply Current (Average Over Time) < 10 µA
- Cell Conditioning Current Up to 10 mA
- Reference Electrode Bias Current (85°C) 900-pA
(Maximum) - Output Drive Current 750 µA
- Complete Potentiostat Circuit to Interface to Most
Not Biased Gas Sensors - Low Bias Voltage Drift
- Programmable TIA Gain 2.75 kΩ to 350 kΩ
- I2C-Compatible Digital Interface
- Ambient Operating Temperature –40°C to 85°C
- Package 14-pin WSON
- Supported by Webench Sensor AFE Designer
The LMP91002 device is a programmable Analog Front End (AFE) for use in micro-power electrochemical-sensing applications. It provides a complete signal path solution between a not biased gas sensor and a microcontroller generating an output voltage proportional to the cell current.
The LMP91002’s programmability enables it support not biased electro-chemical gas sensor with a single design. The LMP91002 supports gas sensitivities over a range of 0.5 nA/ppm to 9500 nA/ppm. It also allows for an easy conversion of current ranges from 5 µA to 750 µA full scale. The LMP91002’s transimpedance amplifier (TIA) gain is programmable through the I2C interface. The I2C interface can also be used for sensor diagnostics. The LMP91002 is optimized for micro-power applications and operates over a voltage range of 2.7 V to 3.6 V. The total current consumption can be less than 10 µA. Further power savings are possible by switching off the TIA amplifier and shorting the reference electrode to the working electrode with an internal switch.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | LMP91002 Sensor AFE System: Configurable AFE Potentiostat for Low-Power Chemical Sensing Applications datasheet (Rev. B) | PDF | HTML | 2015年 10月 29日 |
| User guide | SPIO-4 Precision Signal-Path Controller Board User Guide (Rev. A) | 2018年 5月 5日 | ||
| Application note | AN-2230 MSP430 Interface to LMP91000 Code Library (Rev. C) | 2013年 5月 1日 | ||
| More literature | Sensor Analog Front Ends Brochure | 2012年 10月 30日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LMP91000EVM — LMP91000 評估模組
德州儀器的 LMP91000EVM 評估模組 (EVM) 協助設計師評估 LMP91000 作為電化學感測器之感測器類比前端的運作與效能。LMP91000EVM 為該感測器 AFE 評估平台的一部分。
SPIO4 通訊板為一款資料擷取板；當 LMP91000 用於感測器 AFE 評估平台 (LMP91000EVM) 時，此通訊板為必要配件，且需另行訂購。
LMP9XXXXSENSORDEV-SW — LMP91000 Sensor AFE Software Download
支援產品和硬體
產品
訊號調節器
精確 ADC
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (NHL) | 14 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點