首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器
最新

MC111

預覽

具有整合式霍爾感測器的 20-V、1-A 峰值單相 BLDC 馬達驅動器

立即訂購
產品規格表

MC111

預覽
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) to
Rating Catalog Operating temperature range (°C) to
SOT-23-THN (DYM) 6 11.02 mm² 2.9 x 3.8
  • N-channel H-bridge driver with internal Hall sensor
  • RDS(ON): 850mΩ (HS+LS)
  • Current rating
    • Configurable current limit up to 1.21A
    • 0.6A rms (TA = 85oC, RθJA = 100oC/W)
  • Integrated supply (VM) clamp
  • Configurable speed curve and starting duty cycle
  • Commutation schemes: square or soft (up to 90o)
    • Square: maximum torque/speed
    • Soft: optimized speed and acoustics
  • Configurable speed reference input: PWM or DC
    • Input PWM frequency range: 20 Hz to 90 kHz
    • Input DC voltage range: (0-3)V
  • Configurable output PWM frequency: 25 or 50kHz
  • Closed loop speed control accuracy: ±3%
  • PWM dithering to reduce EMI
  • Configurable soft start time
  • Configurable hall offset angle and time
  • Speed output with 0.5x, 1x, 2/3x, or 2x multipliers
  • Rotor lock detection output (RD)
  • Configurable PWM modes
    • Synchronous, asynchronous and hybrid
  • Auto-demag for high efficiency across speed
  • One-time programming (2 pages) over I2C
  • Protection features
    • Overcurrent protection for short between VM/GND and OUTx
    • Locked rotor protection (LRP) with auto-restart
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Thermal shutdown (TSD)
    • Configurable fault retry time
  • Functional features (Opeartion continues)
    • when short between FG/RD and GND
    • 100% input during short between PWM/DC and VM
  • N-channel H-bridge driver with internal Hall sensor
  • RDS(ON): 850mΩ (HS+LS)
  • Current rating
    • Configurable current limit up to 1.21A
    • 0.6A rms (TA = 85oC, RθJA = 100oC/W)
  • Integrated supply (VM) clamp
  • Configurable speed curve and starting duty cycle
  • Commutation schemes: square or soft (up to 90o)
    • Square: maximum torque/speed
    • Soft: optimized speed and acoustics
  • Configurable speed reference input: PWM or DC
    • Input PWM frequency range: 20 Hz to 90 kHz
    • Input DC voltage range: (0-3)V
  • Configurable output PWM frequency: 25 or 50kHz
  • Closed loop speed control accuracy: ±3%
  • PWM dithering to reduce EMI
  • Configurable soft start time
  • Configurable hall offset angle and time
  • Speed output with 0.5x, 1x, 2/3x, or 2x multipliers
  • Rotor lock detection output (RD)
  • Configurable PWM modes
    • Synchronous, asynchronous and hybrid
  • Auto-demag for high efficiency across speed
  • One-time programming (2 pages) over I2C
  • Protection features
    • Overcurrent protection for short between VM/GND and OUTx
    • Locked rotor protection (LRP) with auto-restart
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Thermal shutdown (TSD)
    • Configurable fault retry time
  • Functional features (Opeartion continues)
    • when short between FG/RD and GND
    • 100% input during short between PWM/DC and VM

The MC111 is a 25V, 850mΩ rated motor driver with integrated N-channel full-bridge, charge pump, Hall sensor, commutation control logic, and protection circuitry for single phase brushless DC motors. The Hall sensor provides rotor position information to the commutation logic to maintain continuous rotor motion. The commutation logic can be programmed for square and soft PWM waveforms to reduce acoustic noise or maximize speed/efficiency.

The duty cycle of a pulse-width modulated signal or a (0-3)V DC voltage on the PWM/DC pin controls the motor speed. FG/RD pin can be configured to report the motor speed or a locked rotor condition to an external controller. The PWM/DC and FG/RD pins can be temporarily configured as an I2C interface to support a programming (OTP) mode to configure the OTP during production.

The MC111 integrates protection features for motor and device protection. These include supply undervoltage lockout, overvoltage protection, output overcurrent protection, device overtemperature shutdown, and locked rotor protection.

The MC111 is available in a 6-pin SOT23-FL package. SOT23-FL is a flat lead package with a maximum height of 1.1mm.

The MC111 is a 25V, 850mΩ rated motor driver with integrated N-channel full-bridge, charge pump, Hall sensor, commutation control logic, and protection circuitry for single phase brushless DC motors. The Hall sensor provides rotor position information to the commutation logic to maintain continuous rotor motion. The commutation logic can be programmed for square and soft PWM waveforms to reduce acoustic noise or maximize speed/efficiency.

The duty cycle of a pulse-width modulated signal or a (0-3)V DC voltage on the PWM/DC pin controls the motor speed. FG/RD pin can be configured to report the motor speed or a locked rotor condition to an external controller. The PWM/DC and FG/RD pins can be temporarily configured as an I2C interface to support a programming (OTP) mode to configure the OTP during production.

The MC111 integrates protection features for motor and device protection. These include supply undervoltage lockout, overvoltage protection, output overcurrent protection, device overtemperature shutdown, and locked rotor protection.

The MC111 is available in a 6-pin SOT23-FL package. SOT23-FL is a flat lead package with a maximum height of 1.1mm.
filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet MC111 25V , Single Phase BLDC Driver with Integrated Hall Sensor datasheet PDF | HTML 2025年 12月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MC121EVM — MC121 評估模組

MC121EVM 可協助使用者評估 MC121 與 MC121-Q1 單相 BLDC 驅動器的性能。EVM 包含板載 FTDI 晶片，可將 USB 通訊從 PC 轉換至 UART。板載 MSP430FR2355 微控制器 (MCU) 可將 UART 通訊轉換為控制訊號或 I2C 格式化資料，並傳送至應用 PCB 上的 MC121 或 MC121-Q1。具備許多使用者可選擇的跨接器、電阻器、連接器和測試點，有助於評估 MC121 或 MC121-Q1 的眾多功能，並配置裝置的專屬設定。
使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

MOTORSTUDIO — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio is an easy-to-use graphical user interface (GUI) that simplifies the tuning process of our brushless DC (BLDC) motor drivers to reduce device evaluation and product development time. The GUI allows users to quickly spin up their motors and optimize various stages of motor operation to (...)

支援產品和硬體

支援產品和硬體

產品
整合式控制 BLDC 驅動器
  • MCF8315A — 40-V 最大值、4-A 峰值無感測器 FOC 控制三相 BLDC 馬達驅動器
  • MCF8315C — 最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器
  • MCF8315C-Q1 — 車用、最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器
  • MCF8315D — 具有 UL 認可變體的 40V（最大值）4A（峰值）、無感測器 FOC 三相 BLDC 馬達驅動器
  • MCF8316A — 40-V 最大值、8-A 峰值無感測器 FOC 控制 3 相 BLDC 馬達驅動器
  • MCF8316C-Q1 — 車用、40-V 最大值、8-A 峰值、無感測器磁場定向控制 (FOC) 3 相 BLDC 馬達驅動器
  • MCF8316D — 具有 UL 認可變體的 40V（最大值）8A（峰值）、無感測器 FOC 三相 BLDC 馬達驅動器
  • MCF8329A — 60V 無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器
  • MCF8329A-Q1 — 車用，12V 和 24V，無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器
  • MCF8329HS-Q1 — 車用，12V 和 24V，無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器
  • MC121-Q1 — 具有整合式霍爾感測器的車用 40-V、1-A 峰值單相 BLDC 馬達驅動器
  • MC111 — 具有整合式霍爾感測器的 20-V、1-A 峰值單相 BLDC 馬達驅動器
硬體開發
開發板
  • MCF8315EVM — 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8315 評估模組
  • MCF8315PWPEVM — 適用於 24 接腳塑膠小型封裝 (PWP) 的 MCF8315 評估模組
  • MCF8316AEVM — 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8316 評估模組
  • MCF8316DEVM — MCF8316D 評估模組
  • MCF8329EVM — 適用於 60V 無感測器 FOC 三相 BLDC 閘極驅動器的 MCF8329 評估模組
  • MCF8329HSEVM — MCF8329HS 評估模組
  • MCF8329RRYEVM — 適用於 32 針腳 WQFN 封裝的 MCF8329A-Q1 評估模組
  • MCF8329HSRRYEVM — 適用於 WQFN 封裝的 MCF8329HS 評估模組 (RRY)
  • MC121EVM — MC121 評估模組
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23-THN (DYM) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片